概述：

隨著社會經濟和城市化的發展，城市及工業污水的產生及其數量在不斷增長，固廢是污水處理后的副產品，是一種由有機殘片、細菌菌體、無機顆粒、膠體等組成的極其復雜的非均質體，同時污泥中含有大量的有機物、腐殖質等可利用資源，對固廢進行前期處理后，可作為焚燒介質、肥料、建筑材料、活性炭等。對于工業固廢、生活固廢過去一般采用填埋法進行處理。隨著固廢的量越來越大，人們開始使用焚燒法，這種方法可以從固廢中有效地獲取熱能，減少環保成本并且不造成二次污染。另外，固廢也可作為有機肥料進行深加工利用，但上述兩種處理方法仍需對固廢進行干化或半干化處理。大量固廢產生，傳統的空心漿葉干燥機已無法滿足其烘干要求我們公司從國外引進技術，采用圓盤式固廢干化機對多種物料進行干化作業，采用不同形式的干化試驗，進行技術與能耗的經濟分析，總結出圓盤式固廢烘干機是比較理想的節能干化設備。我公司對固廢干化進行了多次升級換代和改型，形成我公司專有的技術及特點，以應對大型固廢干化項目。

With the development of social economy and urbanization, the production and quantity of urban and industrial sewage are increasing. Solid waste is a by-product of sewage treatment. lt is an extremely complex heterogeneous body composed of organic debris, bacteria, inorganic particles, colloids and so on. At the same time, sludge contains a lot of organic matter and humus. lt can be used as incineration medium, fertilizer, building materials, activated carbon and so on. For industrial solid waste and life solid waste, landfil disposal was generally used in the past, With the increasing amount of solid waste. people bean to use incineration method, which can effectively obtain heat energy from solid waste, reduce environmentalcosts and do not cause secondary pollution,ln addition, solid waste can be further processed and utilized as oraanic fertilizer, but the above two methods still need to be dried or semi-dried, A large number of solid waste has been produced, and the traditional holow paddle dryer has been unable to meet its dryin requirements. Our company imports advanced technoloay from abroad, uses disc solid waste drver to drv various materials uses diferent forms of drying tests, carries out economic analysis of technology and energy consumption, and concludes that disc solid waste dryer is an ideal energy-saving drving equipment. Our company has uparaded and reformed the solid waste drying many times, forming our company's proprietary technology and characteristics, in order to cope with large-scale solid waste drying projects.

原理：

干化機主要由夾套，單軸轉子和傳動裝置組成。固廢通過夾套，空心軸和軸上焊接的空心盤片的熱傳到被間接加熱干化。盤片對固廢沒有切割，而是通過盤片邊緣的推進攪拌器的作用，對固廢進行攪拌，不斷更新干化面，從而實現干化的目的。

The drying machine is mainly composed of jacket, single shaft rotor and transmission device. The solid waste passes throughthe iacket, hollow shaft and heat transfer from the hollow disc welded to the shat to be indirectly heated and dried. The disc does not cut solid waste, but mixes solid waste by pushing the agitator on the edge of the disc, and constantly updates the drying surface, so as to achieve the purpose of drying.

特點：

1.采用蒸汽傳熱介質，既可用于半干化工藝也可用于全干化工藝，系統簡單，輔助設備少。
2.設置空氣補給口，使尾氣排放更加順暢，尾氣處理系統負荷小。
3.可靠性高，持續運行性好，可晝夜運轉，適用于長時間大處理量的固廢干化。
4.蒸汽與固廢不接觸，尾氣中不溶性氣體量少，可以入爐焚燒，二次污染少。
5.運行時氧含量，溫度和粉塵濃度低，系統安全性好。
6.千化機通過外殼壁、中空軸及每個豎立圓盤的左右兩面進行傳熱，傳熱面積大，結構緊湊，外形尺寸小。
7.千化機內部，固廢為濕固廢，為防止固廢粘結在轉盤上，在外殼內警有固定的較長刮刀，伸到圓盤之間的空隙
起到攪拌固廢，清潔盤面的作用。固廢經破碎和攪動后，呈均勻顆粒狀，有利于進一步處置。
8.采用低溫?zé)嵩?s170C)加熱，圓盤上的固廢在停車時不會過熱，再次啟動不受影響。
9.固廢處理負荷大，即使進料不均勻也能保證平穩運行，內部運行阻力小，設備能耗低。
10.保養簡單，持續運行性好，可晝夜運轉，保證每年8000小時運行。

1. The steam heat transfer medium can be used in both semi-drying and full-drying processes. The system is simple and the auxiliary equipment is few.
2, the air supply port is set up to make the exhaust emission more smoother and the tal gas treatment system less load.
3. lt has high reliability, good sustainability and can operate day and night. lt is suitable for solid waste drying with long time andlarge capacity.
4. Steam is not in contact with solid waste, and the amount of insoluble gases in tail gas is less, so it can be incinerated in the furnace with less secondary pollution.
5. the oxygen content, temperature and dust concentration at runtime are low and the system is safe.
6, The drver conducis heat transfer throuah the shel wall. hollow shaft and the left and right sides of each vertical disc,The dryer has large heat transfer area, compact structure and small size.
7. In the dryer, solid waste is wet solid waste. In order o prevent solid waste from adhering to the turntable, there is a fixed ong scraper on the inner wall of the outer shell, which extends to the gap between the discs and plays the role of stiring solid waste and cleaning the disc surface. Ater solid crushing and agitation, the solid waste is uniform and granular, whicr is conducive to further disposal. , The solid waste on the disc will not overheat during parking and the restart will not be affected when heated by a lov temperature heat source (<170 C).
9. Solid waste treatment load is large, even if the feed is not uniform, it can ensure smooth operation, internal operation resistance is small, equipment energy consumption is low.
10. maintenance is simple, continuous operation is good, can run around the clock, ensure 8000 hours per year.

技術參數：