不銹鋼對輥破碎機（CE） RollerCrusher(madeofstainlesssteel) (CEApproved)1.概述(Description)：不銹鋼對輥式破碎機主要由輥輪、輥輪支撐軸承、壓緊和調節裝置以及驅動裝置等部分組成

不銹鋼對輥破碎機（CE）
Roller Crusher ( made of stainless steel ) ( CE Approved )

1. 概述( Description )：

不銹鋼對輥式破碎機主要由輥輪、輥輪支撐軸承、壓緊和調節裝置以及驅動裝置等部分組成。兩輥輪之間裝有楔形或墊片調節裝置，楔形裝置的頂端裝有調整螺栓，當調整螺栓將楔塊向上拉起時，楔塊將活動輥輪頂離固定輪，具有噪音低、粉塵少、性能可靠、維修方便等特點。

Stainless steel roller crusher Consists of the roller, roller bearings, compression and adjustment devices and drives and other components. A wedge or shim adjustment device is mounted between the two rollers, the top of the wedge device is equipped with adjusting bolts, and when the adjusting bolt pulls the wedges upwards, the wedges lift the movable roller away from the fixed wheels with low noise and Less dust, reliable performance, easy maintenance and so on.

2. 原理( Principle )：

對輥式破碎機將破碎物料經給料口落入兩輥?zhàn)又g，進行擠壓破碎，成品物料自然落下。遇有過硬或不可破碎物時，對輥式破碎機的輥?zhàn)涌蓱{液壓缸或彈簧的作用自動退讓，使輥?zhàn)娱g隙增大，過硬或不可破碎物落下，從而保護機器不受損壞。相向轉動的兩輥?zhàn)佑幸欢ǖ拈g隙，改變間隙，即可控制產品排料粒度。雙輥破碎機是利用一對相向轉動的圓輥，四輥破碎機則是利用兩對相向轉動的圓輥進行破碎作業。

Raw material feed into the gap of the two rollers, for crushing, the finished product come out from the bottom of the roller freely . Case of hard or unbreakable material , the roller crusher roller hydraulic cylinders or springs can automatically retreat, so that the roller gap increases, too hard or unbreakable objects fall, thus protecting the machine from damage. Opposing rotation of the two rollers have a certain gap, changing the gap, you can control the maximum particle size of the product. Double-roll crusher is use a pair of opposite rotation roller, four-roll crusher is use two pairs of opposite rotation roller for crushing operation.

3、應用范圍（ Application Scope ）

適用于需要將燒結好的大顆粒狀物料破碎成小顆粒或粉末，多用于冶金行業燒結后的物料進行多級破碎達到粉末狀的工況，如碳化硅、碳化鎢等，進料粒度：25-100mm，成品粒度0.1-10mm 。
It is suitable for crushing large agglomerated material into small particles or powder. Used for multi-level crushing of the sintered material in the metallurgical industry to reach the powdery condition , Such as silicon carbide, tungsten carbide , etc … , Feed particle size: 25-100mm, finished particle size: 0.1-10mm.

4、技術參數Technical parameter

型號	2PG0425	2PG0640	2PG0740	2PG0850	2PG1060	2PG1260	2PG1560
輥直徑(mm)	Ф400	Ф600	Ф700	Ф800	Ф1000	Ф1200	Ф1500
輥寬(mm)	250	400	400	500	600	600	600
入料粒度(mm)	25-100	25-100	25-100	25-100	25-100	25-100	25-100
排料口(mm)	2-8	2-8	2-8	2-8	2-10	2-10	2-10
處理能力(t/h)	5-10	10-20	15-30	20-40	30-50	40-70	60-110
配動力型號	Y132M-6	Y180L-6	Y200L-4	Y225M-4	Y250M-4	Y315M-6	Y315L-6
電機功率(kw)	5.5×2	15×2	30×2	45×2	55×2	75×2	110×2
總重量（t）	2.2	5.9	9.8	13.5	17.2	28.5	39.3

Note: customized equipment is acceptable for us .
CE & UL requirement is acceptable for us .