設計原理Design Principles
1、整個筒體按照壓力容器設計與制作。
2、其整個工作過程可以在一個密閉的環境內進行。
3、在過濾階段主要是靠罐體底部抽真空，為了提高過濾效率在罐體內可以施加正壓，一般不超過0.1MPa。
4、在濾餅抽干后，由于濾餅密度較高，為了使其疏松，靠S型槳葉的反切和升降可以把濾餅刮松。
5、在洗滌過程中，由S型槳葉的正轉和升降將起了攪拌作用，使洗滌液與物料充分洗滌。
6、底盤與筒體設計可拆卸式，在底盤上鋪上支承網和沖孔板一則便于液體流動，二則便于安裝濾布。
7、過濾介質可以用濾布、無紡布、也可以用燒結網。
8、卸料是通過S型槳葉反推動使物料從側出料口自動卸出。
9、攪拌的正反轉是通過電機減速機帶動主軸轉動調節液壓閥完成升降的速度，減速機可選國產和進口的。
1.The whole cylinder is designed and manufactured according to pressure vessel.
2.The whole working process can be caried out in a closed environment.

3.In the filtration stage,it mainly relies on the vacuum at the bottom of the tank,ａnd in order to improve the filtrationcefficiency,positive pressure can be applied in the tank,which is generally not more than0.1MPa.

4.Ater the cake is drained,due to the high density of the cake,in order toloosen it,the cake can be scraped loose by thereverse cutting and lifing of the S-shaped blade.

5.Inthe washing process,the positive rotation and liting of the S-shaped blade will play a stirring role,so that the washingliquid and materials are fully washed.

6.The chassis and cylinder are designed to be removable,ａnd the supporting net and punching plate are laid on the chassisto facilitate liquid flow,ａnd the filter cloth is easy to install.

7.The filter medium can be filter cloth,non-woven fabric,or sintered mesh.

8.The material is automatically discharged from the side discharge port by the S-shaped blade pushing back.

9.The forward and reverse rotation of stirring is to drive the spindle to rotate and adjust the speed of the hydraulic valve tocomplete the lifing through the motor reducer,ａnd the reducer can be selected from domestic and imported.

材質：碳鋼、不銹鋼、鈦材、哈氏合金、襯塑或復合材料等

Material:carbon steel,stainles stel,titanium,Hastelloy,Teflon or composite materials,etc.