The PRO115-HS is Aerotech smallest hard cover, side-sealed stage design and comes with a 20 mm/rev ball screw for high-speed applications requiring up to 1200 mm/s. Competitive pricing coupled with Ae......

● Seven models with travels from 100 mm to 500 mm
● 4X speed capability of the regular PRO series – up to 1200 mm/s
● Side-seal design with hard cover
● Low-cost; high performance
● Long-life linear motion guide bearing system

Rugged Construction

The hard-cover design provides protection from debris. The robust aluminum cover is hard-coated to provide a scratch resistant surface.

The side seals keep dirt and particulates out of the stage and protect the bearing surfaces from contamination. The vertical orientation of the seals easily deflects debris away from the stage. Competitive top seal designs can collect debris, resulting in the eventual failure and replacement of the sealing mechanism.

NEMA 23 Flange-Mount

The PRO115-HS has a NEMA 23 flange-mounting interface for attachment of a wide variety of Aerotech and third-party motors. Aerotech can provide brush, brushless and stepper motors preconfigured and mounted directly to the stage for integration with Aerotech controls. Or the stage can be purchased without the motor for the attachment of third-party motors.

Easily Accessible Mounting

The mounting holes in the PRO115-HS base are accessible from the outside of the stage for ease of integration. The cover does not have to be removed when mounting the stage to a bread-board or when attaching multiple stages together in an X/Y/Z system. The tabletop is available with both metric and English hole patterns and can be ordered with brush attachments to clear debris that may collect on the hard cover. Tabletops with hole patterns that allow the direct attachment of Aerotech ADRS and ACS-LP series low profile direct-drive rotary stages are available.

Configuration Options
Aerotech BM series brushless servomotor with square-wave encoder output provides a net resolution of 2 microns. A holding brake can be added to the motor to prevent backdriving, and a motor fold-back kit is available for space-constrained applications to reduce the overall stage length.