干燥設備 粉碎設備 混合設備 反應設備 過濾分離設備 過濾材料 滅菌設備 萃取設備 貯存設備 傳熱設備 鍋爐 塔設備 結晶設備 其它制藥設備
常州市華夏干燥制粒設備有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質經銷商
所 在 地
聯系方式:查查看聯系方式
更新時間:2026-09-06 07:26:45瀏覽次數:29次
聯系我時,請告知來自 制藥網節能干燥設備--(真空)槳碟片式葉干燥機(通過歐盟CEPED認證) EnergySavingDryingEquipment--VacuumDiscTypePaddleDryer(CEPEDApproved) 1.概述Descriptions:楔型空心槳葉干燥機可對膏狀、顆粒狀、粉狀、漿狀物料間接加熱或冷卻
節能干燥設備--(真空)槳碟片式葉干燥機 (通過歐盟CE & PED認證)
Energy Saving Drying Equipment --Vacuum Disc Type Paddle Dryer (CE&PED Approved)
1.概述Descriptions:
楔型空心槳葉干燥機可對膏狀、顆粒狀、粉狀、漿狀物料間接加熱或冷卻,可完成干燥、冷卻、加熱、滅菌、反應、低溫煅燒等單元操作。設備中特殊的楔型攪拌傳熱 槳葉,具有較高的傳熱效率和傳熱面自清潔功能。
空心軸上密集排列著楔型中空槳葉,熱介質經空心軸流經槳葉。單位有效容積內傳熱面積很大,熱介質溫度從-40℃到320℃,可以是水蒸汽,也可以是液體型:如熱水、導熱油等。間接傳導加熱,沒有攜帶空氣帶走熱量,熱量均用來加熱物料。熱量損失僅為通過器體保溫層向環境的散熱。物料顆粒與楔型面的相對運動產生洗刷作用,能夠洗刷掉楔型面上附著物料,使運轉中一直保持著清潔的傳熱面。槳葉干燥機的殼體為W型,殼體內一般安排二到四根空心攪拌軸。殼體有密封端蓋與上蓋,防止物料粉塵外泄及收集物料溶劑蒸汽。出料口處設置一擋扳,保證料位高度,使傳熱面被物料覆蓋而充分發揮作用。傳熱介質通過旋轉接頭,流經殼體夾套及空心攪拌軸,空心攪拌軸依據熱介質的類型而具有不同的內部結構,以保證的傳熱效果。
槳葉干燥機 can be used to dry or cool paste, granular, powder or starchy materials indirectly. It can carry out the processes of drying, cooling, heating, sterilization, reaction and low temperature calcination. The special paddle can help make sure of high heat transfer efficiency. Besides, the heat transfer surface has a self-cleaning function.
Paddles are lined densely on the hollow shaft. Heating resource will flow through the blades through the hollow shaft. The heat transfer surface may be very large in unit effective volume. Heat resource may be steam or liquids such as hot water or heat conducting oil with different temperatures from -40℃ to 320℃.Because of the indirect heat transfer, the air won't carry away any heat. Thus all the heat will be used for heating of materials. The only loss of heat is due to the heat dissipation from the insulating layer to the environment. The relative movement between the granules and the paddle surface will cause scrubbing, which can get rid of the attachments on the paddle surface. Thus there is always a clean heat transfer surface while the running of the machine. The 槳葉干燥機 has a W-shaped housing, inside which are two to four hollow stirring shafts. The seal cover and the upper cover will prevent the powders from leaking out and at the same time collect the solvent or steam .There is a baffle at the outlet, which will make sure of a high level of material layer so that the heat transfer surface will be covered with materials and play a good role. Heat transfer medium will flow through the rotating joint, then through the shell jacket and the hollow stirring shaft. In order to make sure of a good heat transfer efficiency, the hollow stirring shafts will have different inner structures according to different types of heat transfer medium.
2. 特點Features:
2.1漿葉干燥機能耗低:由于間接加熱,沒有大量攜帶空氣帶走熱量,干燥器外壁又設置 保溫層,對漿狀物料,蒸發1kg水僅需1.2kg水蒸汽。
Because of the indirect heat transfer, the air won't carry away any heat. Besides, the outside shell of the dryer has a insulating layer, so it needs only 1.2kg steam to evaporate 1kg of water in slurry materials.
2.2漿葉干燥機系統造價低:單位有效容積內擁有巨大的傳熱面,就縮短了處理時間,設備尺寸變小。就極大地減少了建筑面積及建筑空間。
Low price:Because of the large heat transfer surface area in unit effective volume, a good drying efficiency can be achieved in a short time period and a small building area and space, using a relatively small machine.
2.3處理物料范圍廣:使用不同熱介質,既可處理熱敏性物料,又可處理需高溫處理的物料。常用介質有:水蒸汽、導熱油、熱水、冷卻水等。既可連續操作也可間歇操作,可在很多領域應用。
A large scope of applicable materials: Using different heat transfer mediums, blade dryer can be used to dry either heat- sensitive materials or materials that require high temperature. Any of the following mediums can be used for heat transfer: steam, heat conducting oil, hot water or even cooling water. So this? machine can be used in many fields either continuously or in batch.
2.4環境污染?。翰皇褂脭y帶空氣,粉塵物料夾帶很少。物料溶劑蒸發量很小,便于處理。對有污染的物料或需回收溶劑的工況,可采用閉路循環。
Environmentally friendly: No air is used or carried, and little powder material is entrained. Besides, there is a small amount of solvent evaporation, which is easy to deal with. As for materials which may cause pollution or the situation in which the solvent needs to be returned, a closed cycle can be applied.
2.5操作費用低:該設備正常操作,僅1小時/天·人。低速攪拌及合理的結構。磨損量小,維修費用很低。
Low operation cost: When the machine is operated normally, only one hour per person per day is needed. The low speed stirring way as well as the reasonable structure can make sure that there is little wear and tear and low maintenance cost.
2.6操作穩定:由于楔型漿葉特殊的壓縮--膨脹攪拌作用,使物料顆粒充分與傳熱面接觸,在軸向區間內,物料的溫度、濕度、混合度梯度很小,從而保證了工藝的穩定性。
使用領域
Stable operation: As a result of the special compression - expansion stirring way of wedge-shaped blades, particle materials will be in full contact with the heat transfer sur face. In the axial range, there is a small gradient in material temperature, humidity and degree of mixing, which can thus make sure of a stable technology.
3. 適應物料Applicable materials:
3.1石化行業:聚烯烴粉體、聚碳酸酯樹脂、高、低密度聚乙烯、線型低密度聚乙烯、聚縮醛顆粒、尼龍6、尼龍66、尼龍12、醋酸纖維、聚苯硫醚、丙烯基樹脂、工程塑料、聚氯乙烯、、聚苯乙烯、聚丙烯、聚脂、聚甲醛、苯乙烯~丙烯腈共聚、乙烯~丙烯共聚。
Petrochemistry:Polyolefin powder, polycarbonate resin, high/Low density polyethylene, LLDPE, polyacetal particles,nylon6,nylon66,nylon12,cellulose acetate, polyphenylene sulfide, propylene-based resin, engineering plastics,PVC,PVA,polystyrene,polypropylene,polyester,POM,styrene acrylonitrile copolymer, ethylene-propylene copolymerization.
3.2環保行業:PTA污泥、電鍍下水污泥、鍋爐煙灰、制藥廠廢渣、糖廠廢渣、味精廠廢渣、煤灰。
Environmental protection industry: PTA sludge, electroplating sludge water, boiler soot, pharmaceutical residues, sugar residue, MSG plant residue, coal ash.
3.3飼料行業:醬油渣、骨基飼料、酒糟、食品下角料、蘋果渣、橘子皮、豆粕、雞骨飼料、魚粉、飼料添加劑、生物渣泥
Feedstuff industry:Soy sauce residue, bone-based feed, distiller's grains, food offal, apple pomace, orange peel, soybean meal, chicken-bone feed, fish meal, feed additives, bio-slag cement.
3.4食品行業:淀粉、可可豆、玉米粒、食鹽、變性淀粉、藥品。
Food industry:Starch, cocoa, corn kernels, salt, modified starch, pharmaceuticals.
3.5化工行業:純堿、氮磷鉀復合肥、高嶺土、膨潤土、白碳黑、碳黑、磷石膏、氧化氟化鈉、硝酸鈣、碳酸鎂、、、、硫酸鈣、碳酸鈣、染料、分子篩、皂素
Chemical industry:Soda ash, nitrogen, phosphorus and potassium compound fertilizer, kaolin, bentonite, white carbon black, carbon black, phosphogypsum, oxidation sodium, calcium nitrate, magnesium carbonate, sodium cyanide, aluminum hydroxide, barium sulfate, calcium sulfate, calcium carbonate, dyes, molecular sieve, saponin.
4.工藝流程圖schematic diagram
5.技術參數( Technical Parameter ):
Parameter | ||||||||
型號Model | KJG2.7 | KJG9 | KJG13 | KJG18 | KJG24 | KJG29 | KJG36 | KJG41 |
傳熱面積 | 2.7 | 9 | 13 | 18 | 24 | 29 | 36 | 41 |
有效容積Effective volume(m3) | 0.06 | 0.32 | 0.59 | 1.09 | 1.53 | 1.85 | 2.42 | 2.8 |
轉速范圍Speed scope (r.p.m) | 15-30 | 10-25 | 10-25 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 |
功率Power (kw) | 2.2 | 3.8 | 5.5 | 7.5 | 11 | 11 | 15 | 15 |
器體寬Main body width A (mm) | 306 | 584 | 762 | 940 | 1118 | 1118 | 1296 | 1296 |
總寬Total width B( mm) | 736 | 841 | 1066 | 1320 | 1474 | 1474 | 1676 | 1676 |
器體長Main body length C (mm) | 1956 | 2820 | 3048 | 3328 | 3454 | 4114 | 4115 | 4724 |
總長Total length D (mm) | 2972 | 4876 | 5486 | 5918 | 6147 | 6808 | 6960 | 7570 |
進出料距Distance between material inlet and outlet E (mm) | 1752 | 2540 | 2768 | 3048 | 3150 | 3810 | 3810 | 4420 |
中心高Central height F (mm) | 380 | 380 | 534 | 610 | 762 | 762 | 915 | 915 |
總高Total height G (mm) | 762 | 838 | 1092 | 1270 | 1524 | 1524 | 1778 | 1778 |
Parameter(continuation) | |||||||||
型號Model | KJG48 | KJG52 | KJG62 | KJG68 | KJG73 | KJG81 | KJG87 | KJG95 | KJG110 |
換熱面積Heating transfer area(m2) | 48 | 52 | 62 | 68 | 73 | 81 | 87 | 95 | 110 |
有效容積Effective volume(m3) | 3.54 | 3.96 | 4.79 | 5.21 | 5.78 | 6.43 | 7.39 | 8.07 | 9.46 |
轉速范圍Speed scope (r.p.m) | 10-20 | 10-20 | 10-20 | 10-20 | 5-15 | 5-15 | 5-15 | 5-15 | 5-10 |
功率Power (kw) | 30 | 30 | 45 | 45 | 55 | 55 | 75 | 75 | 95 |
器體寬Main body width A (mm) | 1474 | 1474 | 1651 | 1652 | 1828 | 1828 | 2032 | 2032 | 2210 |
總寬Total width B( mm) | 1854 | 1854 | 2134 | 2134 | 2286 | 2286 | 2438 | 2438 | 2668 |
器體長Main body length C (mm) | 4724 | 5258 | 5410 | 5842 | 5461 | 6020 | 5537 | 6124 | 6122 |
總長Total length D (mm) | 7772 | 8306 | 8865 | 9296 | 9119 | 9678 | 9119 | 9704 | 9880 |
進出口距 | 4420 | 4954 | 4953 | 5384 | 5004 | 5562 | 5080 | 5664 | 5664 |
中心高Central height F (mm) | 1066 | 1066 | 1220 | 1220 | 1220 | 1220 | 1220 | 1220 | 1220 |
總高Total height G (mm) | 2032 | 2032 | 2362 | 2362 | 2464 | 2464 | 2566 | 2566 | 2668 |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
商 鋪:常州市華夏干燥制粒設備有限公司 http://m.jjhengye.com/st5231/
制藥網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
號碼可能有誤,請核對!
請選擇省份
聯系方式
常州市華夏干燥制粒設備有限公司
于都县|
思南县|
仙居县|
得荣县|
蒲江县|
杭锦旗|
泰兴市|
共和县|
九江市|
昔阳县|
伊吾县|
峨眉山市|
诏安县|
常州市|
隆德县|
宁南县|
鲜城|
西藏|
阿拉善盟|
江永县|
濮阳县|
蒙自县|
来安县|
岗巴县|
灌南县|
宜君县|
资源县|
朔州市|
普陀区|
宁津县|
五常市|
巴彦县|
罗定市|
大庆市|
台湾省|
兴山县|
清流县|
青河县|
郸城县|
舒兰市|
宾阳县|
