當前位置：常州市華夏干燥制粒設備有限公司>>干燥蒸發設備>>離心噴霧干燥機

離心噴霧干燥機

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地

在線詢價收藏產品

聯系方式：查查看聯系方式

更新時間：2026-09-06 07:22:59瀏覽次數：21次

聯系我時，請告知來自制藥網

產品分類 品牌分類

暫無信息

常州市華夏干燥制粒設備有限公司

經營模式：經銷商

商鋪產品：36條

所在地區：江蘇

聯系人：查（總經理）

詢價 給他留言

產品簡介

離心噴霧干燥機（CE） CentrifugalSprayDryingEquipment (CEApproved)1.概述Descriptions噴霧干燥是液體工藝成形和干燥工業中泛應用的工藝

詳細介紹

離心噴霧干燥機（CE）
Centrifugal Spray Drying Equipment (CE Approved)

1.概述Descriptions
噴霧干燥是液體工藝成形和干燥工業中泛應用的工藝。于從溶液、乳液、懸浮液和可泵性糊狀液體原料中生成粉狀、顆粒狀固體產品。因此，當成品的顆粒大小分布、殘留水份含量、堆積密度和顆粒形狀必須符合精確的標準時，噴霧干燥是一道十分理想的工藝。
Spray drying is the technology most widely used in the liquid technology shaping and in the drying industry.The drying technology is most suitable for producing solid powder or particle products from liquid materials,such as:solution, emulsion, suspension and pumpable paste states,For this reason,when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.
2.原理Principle
空氣經過過濾和加熱，進入干燥器頂部空氣分配器，熱空氣呈螺旋狀均勻地進入干燥室。料液經塔體頂部的高速離心霧化器，（旋轉）噴霧成極細微的霧狀液珠，與熱空氣并流接觸，在極短的時間內可干燥為成品。成品連續地由干燥塔底部和旋風分離器中輸出，廢氣由風機排空。
After been filtered and heated the air enters into the air distrbutor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Throug the very short time of contacting the heat air,the materials can be dried into the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.
3.應用Applications

化學工業：氟化鈉（鉀），堿性染料和顏料，染料中間體，復合肥，甲酸硅酸，催化劑，硫酸劑，氨基酸，白炭黑等。
塑料和樹脂：AB，ABS乳液，尿酸樹脂，酚醛樹脂，脲醛樹脂，甲醛樹脂，聚乙烯，聚氯乙烯等。
食品工業：脂肪奶粉，蛋白質，可可奶粉，替代奶粉，蛋清（蛋黃），食品和植物，燕麥，雞汁，咖啡，即時溶解茶，調味肉，蛋白質，大豆，花生蛋白，水解產物和所以。
糖，玉米糖漿，玉米淀粉，葡萄糖，果膠，麥芽糖，山梨酸鉀等
陶瓷：氧化鋁，瓷磚材料，氧化鎂，滑石等。

Chemical Industry： Sodium fluoride(potassium),alkaline dyestuff and pigment, dyestuff intermediate, compound fertilizer, formic silicic acid, catalyst, sulphuric acid agent, amino acid, white carbon and so on.
Plastics and resin： AB，ABS emulsion,uric acid resin,phenolic aldehyde resin,urea-formaldehyde resin,formaldehyde resin,polythene,poly-chlotoprene and etc.
Food Industry： Fatty milk powder,protein,cocoa milk powder,substitute milk powder,egg white(yolk),food and plant,oats,chicken juice,coffee,instant dissoluble tea,seasoning meat,protein,soybean,peanut protein,hydrolysate and so forth.
Sugar, corn syrup, corn starch, glucose, pectin, malt sugar, sorbic acid potassium and etc.
Ceramic： aluminium oxide,ceramic tile material,magnesium oxide,talcum and so on.

4.技術參數Technical Parameters

項目item/參數parameter/spec	LPG
項目item/參數parameter/spec	5	25	50	100	150	200-2000
進風溫度inlet temperature ℃	140-350 automatically controlled
出風溫度outlet temerature ℃	~80-90
水分蒸發量Max.water evaporation capacity	5	25	50	100	150	200-2000
離心噴嘴模式centrifugal spraying nozzle transmission mode	compressed air transmission壓縮空氣驅動	Mechanical transmission機械驅動
轉速Rotation speed rpm	25000	18000	18000	18000	15000	8000-15000
霧化盤直徑spraying desc diameter mm	50	100	120	140	150	180-340
熱源Heat supply	Electricity	Electricity+steam	Electricity+steam,fuel oil and gas			Settled by users themselves
電加熱功率Max.Electric heating power kw	9	36	63	81	99
外形尺寸overall dimensions m	1.8×0.93 ×2.2	3×2.7 ×4.26	3.7×3.2 ×5.1	4.6×4.2 ×6	5.5×4.5 ×7	Depends on the concrete conditions
干粉收率Dried powder restoring rate %	≥95	≥95	≥95	≥95	≥95	≥95
Note:For more information please contact export 更多信息請聯系：export