本機用于測試橡膠制品在承受一定時間及壓力后之后回彈性能。取標準試樣，分布平放于試盤上面，夾于兩板之間，經規定時間后取出，釋放試片并泠卻后，分別量測試片最終之中心厚度，代入公式求其壓縮回彈率。

Brief introduction:

It is used to determine the rebound-character of the specimen of rubber product, which endures a certain compression force under the specified time period. Put the specimen onto the test pan leverlly and grip it between two compression plates. Through the specified time period, take it out and cool it down then measure its center thickness to get its rebound rate.

參照標準：SATRA  TM-64

Standard for：SATRA  TM-64

技術規格：

試片數量：3-27個

試片尺寸：

方法一：發泡材料φ29.0mm 

非發泡材料φ14.5mm

方法二：發泡材料φ25.4*25.4mm 

非發泡材料φ12.7mm

體積：23cm*47*60cm

重量：40kg

Technical specifications：

Sample QTY：3~27 PCS

Sample size：

Method 1：foaming material φ29.0mm 

Non-foaming materialφ14.5mm

Method 2: foaming material φ25.4*25.4mm 

Non-foaming materialφ12.7mm

Volume:(length*width*height)23cm*47*60cm

weight：40kg

.