| 參考價 | 面議 |
產品簡介
電簧壓力試驗機5KN-600KN
微機控制彈簧壓力試驗機主機與輔具的設計借鑒了國外的技術，外形美觀，操作方便，性能穩定可靠。計算機系統通過思達控制器，經調速系統控制數字電機轉動，經減速系統減速后通過精密滾珠絲杠副帶動移動橫梁上升、下降，完成彈簧試樣的拉伸、壓縮等力學性能試驗，無污染、噪音低，效率高，具有非常寬的調速范圍和橫梁移動距離，另外配置種類繁多的試驗附具，在金屬、非金屬、復合材料及制品的力學性能試驗方面，具有非常廣闊的應用前景。該機廣泛應用于彈簧制造及檢測、建筑建材、航空航天、機械制造、電線電纜、橡膠塑料、紡織、家電等行業的材料檢驗分析，是科研院校、大專院校、工礦企業、技術監督、商檢仲裁等部門的理想測試設備。
技術參數
序號 | 項目 | 規格 | ||
1 | 試驗力 | 20KN及以下 | 30/50KN | 100KN-600KN |
2 | 試驗力測量范圍 | 1%-99%FS | ||
3 | 試驗力測量準確度 | 優于示值±1% | ||
4 | 橫梁位移測量精度 | 0.01mm | ||
5 | 位移測量準確度 | ±1% | ||
6 | 變形測量范圍 | 0.4%-99%FS | ||
7 | 變形測量精度 | ±0.5% | ||
8 | 變形分辨率 | 0.01mm | ||
9 | 力控速率調節范圍 | 0.005-5%FS/S | ||
10 | 力控速率相對誤差 | ±1%設定值以內 | ||
11 | 變形速率調節范圍 | 0.02-5%FS/S | ||
12 | 變形控制速率相對誤差 | 速率＜0.05％FS時，為±2%設定值以內； 速率≥0.05％FS時，為±0.5%設定值以內； | ||
13 | 橫梁速度測量范圍 | 0.001-500mm/min | ||
14 | 橫梁速度相對誤差 | 速率＜0.01 mm/min時，設定值的±1.0%以內； 速率≥0.01 mm/min時，設定值的±0.2%以內； | ||
15 | 恒力、恒變形、恒位移控制范圍 |
0.5％～100％FS | ||
16 | 恒力、恒變形、恒位移控制范圍 | 設定值<10%FS時，設定值 的±1.0%以內 設定值≥10%FS時,設定值的±0.1%以內 | ||
17 | 變形速率控制精度 | 速率<0.05%FS時為±2.0%設定值內 速率≥0.05%FS時為±0.5%設定值內 | ||
18 | 拉伸空間 | 700mm | 700mm | 700mm |
19 | 工作環境 | 室溫—35℃,相對濕度不超過80% | ||
20 | 整機電源 | 單相,220V±10%,50Hz | ||
21 | 電機功率 | 0.75KW | 0.75KW | 1.5KW/5KW |
22 | 主機尺寸 | 750x480x1700mm | 720x520x1800mm | 900x600x2100mm/1.3x1x2.8m |
23 | 重量 | 280kg | 350kg | 450kg/3000kg |
electronic universal spring comrpession testing machine 5KN-600KN
1.introduction
This spring testing machine is to do spring tension and compression test. It can measure both test force at certain deformation and deformation at certain test force.
It is suitable for industries and areas of spring manufacturing factory, low voltage electrical factory, power machinery factory,, colleges and universities and R&D department.
No | Item | Specification | ||
1 | Force capacity | 20KN and lower | 30/50KN | 100KN-600KN |
2 | Measuring range | 1%-99%FS | ||
3 | Accuracy of force value | Less than ±1% of set value | ||
4 | Precision of displacement | 0.01mm | ||
5 | Accuracy of displacement value | ±1% | ||
6 | Deformation measuring range | 0.4%-99%FS | ||
7 | Accuracy of deformation measuring | ±0.5% | ||
8 | Resolution of deformation | 0.01mm | ||
9 | Force speed range | 0.005-5%FS/S | ||
10 | Accuracy of force speed | Less than ±1% of set value | ||
11 | Deformation speed range | 0.02-5%FS/S | ||
12 | Accuracy of deformation speed control | When set value is less than 0.05%FS,error is less than ±2.0% of set value When set value is more than 0.05%FS，error is less than ±0.5% of set value | ||
13 | Displacement speed range | 0.001-500mm/min | ||
14 | Accuracy of displacement speed | When speed is less than 0.01mm/min,error is less than ±1.0% of set value When set value is more than 0.01mm/min，error is less than ±0.2% of set value | ||
15 | Range of constant force, constant deformation, constant displacement control | 0.5％～100％FS | ||
16 | Accuracy of constant force, constant deformation, constant displacement control | When set value is less than 10%FS，error is less than ±1.0% of set value When set value is more than 10%FS，error is less than ±0.1% of set value | ||
17 | Accuracy of deformation speed | When set value is less than 0.05%FS,error is less than ±2.0% of set value When set value is more than 0.05%FS，error is less than ±0.5% of set value | ||
18 | Tension space | 700mm | 700mm | 700mm |
20 | Voltage | Single phase,220V±10%,50Hz(110V) | ||
21 | Motor power | 0.75KW | 0.75KW | 1.5KW |
22 | Dimension | 750x480x1700mm | 720x520x1800mm | 900x600x2100mm/1.3x1x2.8m |
23 | Weight | 280kg | 350kg | 450kg/3000kg |
留言咨詢
移動站：電簧壓力試驗機5KN-600KN
您訪問的電簧壓力試驗機5KN-600KN產品信息，由濟南旺特貝儀器設備有限公司自行發布提供，產品價格為面議，如您想了解更多關于電簧壓力試驗機5KN-600KN型號、參數、用途等信息，歡迎咨詢。
該內容的真實性、準確性和合法性由發布會員負責，為保障安全，建議您在購買相關產品前務必確認供應商資質以及產品質量！
相關分類
該廠商其他產品
相關技術文章
隨時掌握行業動態
采購中心
采購專員1對1咨詢
*您想獲取產品的資料：
個人信息：
安塞县|
北票市|
肇东市|
南充市|
宜昌市|
乌兰浩特市|
红安县|
鄂托克前旗|
淳安县|
敦化市|
南涧|
兴宁市|
寿阳县|
皋兰县|
九台市|
冕宁县|
兴和县|
郸城县|
阿坝县|
深州市|
罗定市|
子洲县|
延吉市|
自治县|
石河子市|
乌拉特后旗|
上思县|
玉溪市|
华宁县|
陇南市|
金乡县|
茶陵县|
利川市|
望城县|
利津县|
漳浦县|
都昌县|
义马市|
宝清县|
三明市|
汾西县|
用戶評論
發布評論