泵頭組件（不帶清洗）：

Item p/n Description
G1312-60056 Pump Head 1200 SL without Seal Wash
1 5063-6586 Sapphire piston
2 G1311-60002 Piston housing
3 5067-1560 Support Ring SL, no seal wash
4 5062-2484 Gasket, seal wash (pack of 6)
5 5042-8952 Seal holder
6 5063-6589 Piston seal PTFE, carbon filled, black (pack of 2), default
OR 0905-1420 PE seals (pack of 2)
7 G1311-25200 Pump chamber housing
8 G1312-60066 Passive inlet valve 1220/1260
G1312-60025 Active inlet valve body, without cartridge (OPTIONAL)
G1312-60020 Cartridge for active inlet valve 600 bar (OPTIONAL)
for G1310B Isocratic Pump and G1311B Quaternary Pump
(OPTIONAL)
5062-8562 Active Inlet Valve Cartridge (400 bar) (OPTIONAL)
For G1311C Quaternary Pump VL (OPTIONAL)
9 G1312-60067 Outlet valve 1220/1260
10 5042-1303 Lock screw
11 G1312-60061 Purge valve 1260
12 0515-2118 Pump head screw (M5, 60 mm)

泵頭組帶清洗：

Item p/n Description
G1312-60045 Pump head assembly with seal wash
1 5063-6586 Sapphire piston
2 G1311-60002 Piston housing
3 01018-60027 Support ring seal wash
4 0905-1175 Wash seal (PTFE)
OR 0905-1718 Wash Seal PE
5 5062-2484 Gasket, seal wash (pack of 6)
6 5042-8952 Seal holder
7 5063-6589 Piston seal PTFE, carbon filled, black (pack of 2), default
OR 0905-1420 PE seals (pack of 2)
8 G1311-25200 Pump chamber housing
9 G1312-60066 Passive inlet valve 1220/1260
G1312-60025 Active inlet valve body, without cartridge (OPTIONAL)
G1312-60020 Cartridge for active inlet valve 600 bar (OPTIONAL)
For G1310B Isocratic Pump and G1311B Quaternary Pump
(OPTIONAL)
5062-8562 Active Inlet Valve Cartridge (400 bar) (OPTIONAL)
For G1311C Quaternary Pump VL (OPTIONAL)
10 G1312-60067 Outlet valve 1220/1260
11 5042-1303 Lock screw
12 G1312-60061 Purge valve 1260
13 0515-2118 Pump head screw (M5, 60 mm)
G1398A Active Seal Wash Option Upgrade

The Pump head assembly with seal wash (G1312-60045) includes items 1-8, 11
and 13.
G1398-60000 Active Seal Wash Option Kit
14a 5067-4793 Peristaltic Pump with Fixation Springs
14b G1311-60161 1220/1260 Seal Wash Pump Assembly
see note below
5065-9978 Tubing, 1 mm i.d., 3 mm o.d., silicone, 5 m, for seal wash option
01018-23702 Insert tool

主動閥組件：

Item p/n Description
G5699A Active Inlet Valve Upgrade Kit
includes service and the parts listed below
1 G1312-60025 Active inlet valve body, without cartridge
2 G1312-60020 Cartridge for active inlet valve 600 bar
5062-8562 Active Inlet Valve Cartridge (400 bar)
G1311-67304 Connecting tube, MCGV to AIV
(needed for quaternary pump only)
G1311-61601 Active Inlet Valve Cable Assembly
0100-2298 Adapter, PEEK int. 1/4-28 to ext. 10-32

Specifications – Agilent 1260 Infinity Quaternary Pump
Specifications Agilent 1260 Infinity Quaternary Pump (G1311B) and VL version (G1311C)
Hydraulic system Dual piston in series pump with servo-controlled variable stroke drive, floating pistons.
Settable flow range Set points 0.001 - 5 mL/min, in 0.001 mL/min increments.
Flow range 0.2 - 10.0 mL/min
Flow precision ≤ 0.07 % RSD or ≤ 0.02 min SD, whatever is greater; based on retention time at constant room temperature.
Flow accuracy ± 1 % or 10 μL/min whatever is greater; pumping degassed H2O at 10 MPa (100 bar).
Pressure operating range 1260 Infinity Quaternary pump:
Operating range up to 60 MPa (600 bar, 8700 psi) up to 5 mL/min
Operating range up to 20 MPa (200 bar, 2950 psi) up to 10 mL/min
1260 Infinity Quaternary pump VL:
Operating range up to 40 MPa (400 bar, 5880 psi) up to 5 mL/min
Operating range up to 20 MPa (200 bar, 2950 psi) up to 10 mL/min
Pressure pulsation
< 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at
1 mL/min isopropanol, at all pressures > 1 MPa (10 bar, 147 psi).
Compressibility compensation User selectable, based on mobile phase compressibility.
Recommended pH range 1.0 - 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel.
Gradient formation Low pressure quaternary mixing/gradient capability using high-speed proportioning valve.
Delay volume 600 – 900 μL, dependent on back pressure; measured with water at 1 mL/min (water/caffeine tracer).
Composition range 0 - 95 % or 5 - 100 %, user selectable.
Composition precision < 0.2 % RSD or < 0.04 min SD, whatever is greater, at 1 mL/min; based on retention time at constant room temperature.
Integrated degassing unit Number of channels: 4
Internal volume per channel: 1.5 mL
Materials in contact with solvent: TFE/PDD Copolymer, FEP, PEEK, PPS
Control Agilent control software (e.g. ChemStation, EZChrom, OL, MassHunter).
Local control Agilent Instant Pilot
Communications Controller-area network (CAN), RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional.
Safety and maintenance
Extensive diagnostics, error detection and display through Agilent LabAdvisor, leak detection, safe leak handling, leak
output signal for shutdown of the pumping system. Low voltage in major maintenance areas.
GLP features Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of
pumped mobile phase with pre-defined and user settable limits and feedback messages. Electronic records of
maintenance and errors.