慢速低破碎提升機 Slow and low crushing hoist

全封閉結構，雙筒機型，米機斗，破碎低，運轉平穩、結構簡單、操作方便等特點，適用于垂直提升流動性較好的物料。

采用輕質高強度畚斗，畚斗與皮帶之間設有橡膠墊塊，墊塊厚度大于物料厚度，可以有效杜絕夾碎顆粒物料，同時提升機底部設有抽拉式抽屜，方便清理殘留物料。

張緊裝置是螺桿式，通過轉動螺母便可使底輪上下移動，從而調整提升帶張緊及跑偏現象。

在1.2米位置設有透明觀察孔。

整體具備密封性，不漏料，不逸塵。

Fully enclosed structure, double cylinder type, rice hopper, low crushing, stable operation, simple structure, convenient operation, etc., suitable for vertical lifting of materials with good fluidity.

Adopt light and high-strength dustpan, rubber cushion block is set between the dustpan and belt, the thickness of cushion block is greater than the material thickness, which can effectively prevent particle materials from being crushed. At the same time, pull-out drawer is set at the bottom of the elevator to facilitate the cleaning of residual materials.

The tensioning device is screw type. By turning the nut, the bottom wheel can move up and down, so as to adjust the tension and deviation of the lifting belt.

Transparent observation hole is set at 1.2m.

The whole is airtight, without leakage of materials and dust.