OAI 6000 FSA 全自動上側或后側光刻機

詳細介紹

型號6000 FSA用于生產的全自動，上側或后側光刻機

用于：半導體，MEMS，傳感器，微流體，IOT，包裝
憑借在半導體行業40多年的制造，OAI滿足了一個新的精英階段的生產光刻設備的動態市場的日益增長的挑戰。

建立在著名的OAI模塊化平臺上，6000系列具有*自動化的亞微米分辨率的頂側或背側對齊，提供的性價比。

對準器具有*的光束光學，在掩模模式下具有優于±3％的均勻性和每小時180個晶片的吞吐量，這導致更高的產量。 6000系列可以處理厚和粘合基板（高達7000微米），翹曲晶片（高達7 mm-10mm），薄基板（低至100微米厚）和厚光致抗蝕劑的各種晶片。

具有的工藝重復性，6000系列是所有生產環境的解決方案。選擇頂部或可選的背面對齊，使用OAI的基于Cognex的自定義模式識別軟件。對于總體光刻工藝，Series1 6000可以與集束工具無縫集成。 OAI的新生產面罩對齊器是總包。

好處

•全自動
•側面對齊
•可選：底部對齊
UV到NUV
•集群工具集成
•自定義軟件


規格

曝光系統
曝光模式真空接觸硬接觸軟接觸接近（2μ間隙）
高級光束
均勻梁尺寸：50mm - 200mm方形/圓
200mm-300mm見方/圓
均勻度：優于±3％
相機：雙攝像頭與CCTV擴展的景深


對齊系統

模式識別CognexvisionPro¹™與OAI定制軟件
對準精度0.5μ頂面
1.0μ，頂部到底部可選背面對齊
預對準精度優于±50μ
自動對齊頂部到底部
頂部


晶片處理

基材尺寸50mm-200mm圓形或方形或200mm-300mm圓形或正方形
薄晶片低至100M
翹曲晶片高達7mm-10mm
厚和粘合基板高達7000μ
機器人單臂和雙臂晶片處理
失步補償標準軟件或可選的熱卡盤
晶片尺寸轉換5分鐘以內
吞吐量掩模每小時180個晶片 - 隨后75-100個晶片每小時
楔形效果平整3點或可選非接觸

可用選項

IR自動對齊，
盒式磁帶映射
365nm LED曝光光源
溫度控制晶片卡盤
集成屏蔽管理控制
用于全光刻的集成光刻集群
使用SMIF或FOUP接口模塊的過程環境控制
非接觸式調平
邊緣夾緊

Model 6000 FSA Fully Automated, Topside or Backside Mask Aligner for Production

For: Semiconductors, MEMS, Sensors, Microfluidics, IOT, Packaging
With over 4 decades of manufacturing in the semiconductor industry, OAI meets the growing challenge of a dynamic market with a new elite class of production photolithography equipment.

Built on the venerable OAI modular platform, the Series 6000 has topside or backside alignment that is fully automated with sub-micron resolution which delivers performance that is unmatched at any price.

The Aligners have Advanced Beam Optics with better than ±3% uniformity and a throughput of 180 wafers per hour in first mask mode, which results in higher yields. The Series 6000 can handle a wide variety of wafers from thick and bonded substrates (up to 7000 microns), warped wafers (up to 7 mm-10mm), thin substrates (down to 100 micron thick), and thick photo resist.

With superb process repeatability, the Series 6000 is the perfect solution for all production enviroments. Choose either top side or optional back side alignment which uses OAI's customized pattern recognition software that is Cognex based. For the total lithography process, the Seriesl 6000 can be integrated seamlessly with cluster tools. OAI's new production mask Aligners are the total package.

BENEFITS

• Fully Automated
• Topside Alignment
• Optional: Bottomside Alignment
• DUV to NUV
• Cluster Tool Integration
• Customized Software
SPECIFICATIONS

Exposure System
Exposure Modes Vacuum contact Hard contact Soft contact Proximity (2μ gap)
Advanced Beam Optics
Uniform Beam Size: 50mm - 200mm square/round
200mm - 300 mm square/round
Uniformity: Better than ±3%
Camera: Dual Camera with CCTV with Expanded Depth of Field

Alignment System
Pattern Recognition Cognex visionPro¹™ with OAI customized software
Alignment Accuracy 0.5μ topside
1.0μ with top to bottom optional backside alignment
Pre-alignment Accuracy Better than ±50μ
Auto-alignment Top to bottomside

Topside

Wafer Handling
Substrate size 50mm – 200mm round or square or 200mm-300mm round or square
Thin wafers Down to 100Μ
Warped Wafers Up to 7mm-10mm
Thick & Bonded Substrates Up to 7000μ
Robotics Single and dual arm wafer handling
Run-out compensation Standard software or optional thermal chuck
Wafer size conversion 5 minutes or less
Throughput 1st mask 180 wafers per hour - subsequent 75-100 wafers per hour
Wedge Effect Leveling 3 point or optional non-contact
Available Options