德國WELOTEC GMBH工業控制器 工業遠程通訊控制器
德國IPG Laser GmbH激光測量儀
德國ACO AUTOMATION COMPONENTS在線測量儀 手持式測量儀 測溫儀
:王工
同號
449147851
價注意事項：
1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
3.詢價的商友請主動告知公司名稱和，謝謝。
產品系列：
在線測量儀
Sensor MMS-0
On-line moisture measurement for stationary measurement for bulk goods and aggregates in all kinds.
DataSheet_MMS-0 175.7 kB
Sensor MMS-1
On-line moisture measurement for stationary measurement for bulk goods and aggregates in all kinds built-in silos.
DataSheet_MMS-1 163.8 kB
Sensor DMMS
On-line moisture measurement for stationary measurement for bulk goods and aggregates in all kinds.
DataSheet_DMMS 202.2 kB
Sensor DMMS-EX
Digital moisture measurement in Ex-execution:
Approved for:
Ex-classification zone 20/21 (dust)
Ex-classification zone 0/1 (gas)
DataSheet_DMMS-EX 181.0 kB
Hand held measuring device PCH
Pressure compensated hand held measuring system PCH.
DataSheet_PCH 17.08.2010 | 170.6 kB
Sample Taker PN1
Sample taker for moisture measurements for critical transfer applications for bulk goods.
For industrial use in spray dryers, conveyor belts, collectors etc.
Complete with controller and a moisture value evaluation unit.
DataSheet_PN1 17.08.2010 | 233.1 kB
Special device SFM1
Moisture measurement system for wood chips, wood dust and wood pellets.
For industrial use for on-line moisture measurements of wood materials with large density changes.
DataSheet_SFM1 17.08.2010 | 168.2 kB
手持式測量儀
Wood pellets moisture measuring equipment BP1
DataSheet_BP1 17.08.2010 | 234.6 kB
Biomass moisture measuring equipment BM2
DataSheet_BM2 17.08.2010 | 353.6 kB
Grain moisture measuring equipment FS1
DataSheet_FS1 17.08.2010 | 242.8 kB
Grain moisture measuring equipment FS2
DataSheet_FS2 17.08.2010 | 280.2 kB
Grain moisture measuring equipment FS4
DataSheet_FS4 17.08.2010 | 220.0 kB
Biomass moisture measuring equipment BLW
DataSheet_BLW 17.08.2010 | 118.2 kB
Relative moisture measuring device RH1
DataSheet_RH1 17.08.2010 | 171.0 kB
Paper moisture measuring device RH5
Datenblatt_RH5 17.08.2010 | 181.7 kB
Laboratorial measurement UX 2011
Laboratorial device for measuring moisture of materials
data sheet_UX2011 05.10.2010 | 70.6 kB
Laboratorial measurement UX 2031
Laboratorial device for measuring moisture of materials.
This type is equipped with an infrared (bright) and a quartz (dark) heater to dry out the moisture and the crystal moisture (i.g. in gypsum).
data sheet_UX2031 05.10.2010 | 64.9 kB
Measuring/Monitoring/Controlling
Universal digital display
For industrial use.
Free programmable inputs, measuring range, alarm-, averaging- and top value functions
Temperature
Contactless IR-temperature hand held device with laser point
Temperature hand held device with laser point (contactless).
Humidity transmitter serie LF-T for relative moisture and temperature measurement
(till 180°C)
產品系列：
Industrial Cellular
Router, Modems, emetrie
Cellulars and many other network systems for GSM (GPRS, EDGE) or UMTS (HSDPA, HSUPA) networks up to 7.2 Mbit/s.
Data transmission-narrow band
SA-Funkmodems, Digital I/O
Data radio modems, cellulars and embedded modules for the transfer at distances over 30 miles and data rates up to 36 kbit/s.
Industrial WLAN
Industrial WLAN, Nanoloc
Industrial Wireless and nanoLOC solutions for data transmission in the 2.4 GHz frequency band. Wireless transmission of CAN bus, Ethernet, and RS-232/422/485.
Wireless modules
2.4 GHz Transceiver Modules
All 2.4 GHz transceiver modules are certified FCC, IC and ETSI. Supported standards are 802.11, 802.15.4, ZigBee, WirelessHART and SmartMesh-XD.
Serial Communication
RS-232/422/485 - Ethernet
Serial Device Server and Modbus Gateways for the easy interconnection of Serial Devices to Ethernet Networks.
Industrial Ethernet Switches
Managed and unmanaged
Managed and Unmanaged Ethernet switches with Gigabit ethernet and fiber optic connections. Very robust. Wide operating temperature ranges.
Tracking modules
Tracking of humans and machines
Industrial GSM/GPRS modules with GPS tracking. For locating and safety of humans and machines. Incl. I/O, RS-232, CAN bus, battery and more.
Antennas
For all product industrially
Extensive selection of dipole and dipole-array antennas, rod antennas, Yagis, equipment antennas, directional antennas and the right accessories.
工業遠程通訊控制器
Industrial radio remote controls
In close cooperation with JAY Electronique, Welotec distributes and develops high-quality, robust, user-friendly radio remote controls for the operation of hydraulic, pneumatic and electrical drives and/or circuits in a great distance. As the representative and distributor of our partner JAY Electronique we offer you competent technical and commercial support.
ORION series
robust and convenient
Remote control without active emergency stop. Hand-held transmitter with 1, 2, 4, 6, 8, 12, 16 pushbuttons. Free allocation of transmitter keys to receiver relay.
LD series
10 pushbuttons, multi-function
Remote control with emergency stop function. Hand-held transmitter with 6, 8, 10 control elements. With operator position control per infrared connection.
UD series
safe with 10 pushbuttons
Remote control with emergency stop function. Hand-held transmitter with 6, 8, 10 control elements (1/2-stage pushbuttons, selector switch), infrared release etc..
UC series
basic version
Remote control with emergency stop function. Hand-held transmitter with 6, 8, 10 control elements. The basis solution for industrial applications.
XD series
application in hazardous areas
Remote control + emergency stop function cat. 3 according to EN954-1 for application in hazardous areas, among others with compression proof capsuled receiver.
UR series
safe with 4 pushbuttons
Remote control with emergency stop function. Hand-held transmitter with 2, 4 control elements (1/2-stage pushbuttons, selector switch), infrared release etc..
OMNICONTROL series
master switch
Radio remote control with emergency-stop function. Hand-held transmitter with 2/3 master switches (proportional or in stages), selector switches and buttons.
RADIOSAFE series
radio / emergency stop
Radio-controlled emergency stop system cat. 4 for adjustment of running machines and plants or for the removal of interferences.
RADIOSAFE series
wireless enabling handle
Radio-controlled emergency stop system cat. 4 for adjustment of running machines and plants or for the removal of interferences.
產品系列：
Single mode fiber lasers operating at 1.07 microns
IPG’s single mode fiber lasers are available from 5 watts to > 1 kilowatt. These lasers operate in either continuous wave (CW) or modulated modes at frequencies up to 50 kHz.. The output is emitted from a single mode fiber with a typical M2 of < 1.07 and is provided with either an integrated collimator or a plug-in connector.
Single mode applications include: precision cutting, continuous and spot welding, high speed percussion drilling, bending, engraving, sintering and soldering.
| ||
| ||
| ||
| ||
|
High Power Fiber Lasers for Industrial Applications
High power fiber lasers are created from active optical fibers and semiconductor diodes, a merger between two of the most innovative and advanced laser technologies. Fiber lasers use single emitter semiconductor diodes as the light source to pump the active fibers. The laser beam emitted is contained within optical fibers and delivered through an armored flexible cable. Active fibers, special optical fibers doped with rare earth ions, allow for an extremely bright light from a very small core, thus making possible the production of kilowatt class output with excellent beam quality. IPG uses many proprietary technologies to create the undisputed best beam quality kilowatt class lasers available in the market today. The combination of technologies results in a unique, highly reliable and superior performing laser system with parameters exceeding any traditional laser technology. Our robust fiber lasers share common attributes of compact size, long diode life, low maintenance operation, high wall plug efficiency and compley consistent beam divergence and beam profile at all power levels. Fiber Laser Advantages - What to Expect from an IPG Laser High Power Fiber Lasers YLR Series YLS-CL Series YLS Series Optical Coupling, Switching & Sharing High Power Collimators
|
High Power Fiber Laser Brochure
|
IPG High Power Fiber Laser Brochure
Main Features:
|
Q-Switched Fiber Lasers Operating at 1.07 Microns
IPG’s Q-switched fiber lasers are available in several different power ranges with average powers up to 200 watts and peak powers up to 150 kilowatts. These compact fiber lasers feature low divergence and can provide the fluency required for high speed marking of both plastics and metals. The 7 mm beam diameter is ideal for integration into a scanner or conventional focusing system.
Q-Switched fiber laser applications include marking, trimming, micro-machining, bending, diamond cutting, silicon cutting and scribing.
| ||
|
Q-Switched Fiber Lasers Operating at 1.07 Microns
IPG’s Q-switched fiber lasers are available in several different power ranges with average powers up to 200 watts and peak powers up to 150 kilowatts. These compact fiber lasers feature low divergence and can provide the fluency required for high speed marking of both plastics and metals. The 7 mm beam diameter is ideal for integration into a scanner or conventional focusing system.
Q-Switched fiber laser applications include marking, trimming, micro-machining, bending, diamond cutting, silicon cutting and scribing.
| ||
|
Quasi CW Fiber Laser
The last replacement part you'll ever need for your YAG laser. IPG’s four new quasi continuous wave (QCW) fiber laser models feature peak pulse powers of 750 watts, 1,500 watts, 4,000 watts and 6,000 watts and energies from 7.5, 15, 40, 60 joules per pulse, respectively. These air-cooled, compact units are substantially more cost-effective than conventional YAG lasers because of wall plug efficiencies greater than 30% and maintenance-free operation, in that there are no components that require replacement during ordinary operation over its useful life. The YLR-X/Y-QCW-AC lasers offer outstanding pulse power and energy stability over the complete laser power dynamic range. IPG’s new QCW fiber lasers also have exceptional beam quality with various options for the output fiber size available and BPP as low as 0.35 mm x mrad (single-mode version) up to 2 mm x mrad. Convenient plug and play design and fiber delivery system continues to be standard as on all IPG fiber lasers. The new laser is ideal for spot welding, seam welding and drilling in the long pulse operation mode. The CW mode of operation with power up to 500 watts allows fast cutting and makes these lasers a universal tool for many other applications. The QCW fiber lasers are available for requalifying in existing lamp pumped processes at IPG’s application facilities and applications labs. Retrofit services, including engineers familiar with system integration, are available to help customers replace older production lasers with energy-efficient fiber lasers from IPG. | Datasheet:
|
Parameters | Maximum Peak | Maximum Pulse | Maximum Duty |
YLR-150/750-QCW-AC | 750 Watts | 20 ms | 20% |
YLR-150/1500-QCW-AC | 1500 Watts | 10 ms | 10% |
YLR-400/4000-QCW-AC | 4000 Watts | 10 ms | 10% |
YLR-600/6000-QCW-AC | 6000 Watts | 10 ms | 10% |
Main Features:
| Applications:
|
Direct diode fiber delivered at 980 nanometers
IPG’s DLR Series direct diode systems are fiber delivered and are available from 5 watts to multiple kilowatts of power. These solid state lasers provide the unprecedented benefit of wall plug efficiencies approaching 50%. While these systems do contain all of the flexibility of fiber lasers, they are ideally suited for applications that do not require the smaller spot size capabilities of fiber lasers products.
Special multi-outputs units and higher powers up to 10kW are available upon request.
|
High Power Multimode Laser Diodes
IPG Photonics leverages its proven ecom and fiber laser reliability with single emitter technology from 10w, 20w, 30w, 60w, 90w up to 100W modules out of single core fiber from 105µ core up to 400µ core. IPG takes advantage of technologies and vast experiences from the mature ecommunications industry. The high reliability of IPG’s single emitter pumps is proven by their excellent in-field reliability record.
IPG’s experienced team will work with you to customize your configurations to assure you have the optimal solution matched to your requirements. Check out our High Power Laser Diode Portfolio.
| ||
|
采購中心
