本機主要適用于制藥企業，特別針對水針生產包裝過程中，安瓶印字前道工序，塑托分離，自動落托，通過傳送帶進入包裝印字機，實現全自動包裝流程。
SY-B1型自動分托機
Automatic Base Separation Machine SY-B1
1、 自動分托機主要用途及使用范圍
1.Main application and using ranges of automatic base separation machine
本機主要適用于制藥企業，特別針對水針生產包裝過程中，安瓶印字前道工序，塑托分離，自動落托，通過傳送帶進入包裝印字機，實現全自動包裝流程。
Our machine is mostly used in pharmaceutical enterprises, especially in the packing process of squirt cut production. Before the printing of the ampoules, the plastic base is separated automatically and then falls onto the conveyor belt and then into the packing printer. Thus it achieves automated packing process..
2、 自動分托機的性能特點
2. The performance features of automatic base separation machine
主要性能
Main features
1：自動上料，步進推托
Automatically loading materials and steeper pushing bases
2：吸附送托
Adsorption sending bases
3： 重疊盒托自動剔除
Automatically rejecting overlapped box bases
4： 透明盒托檢測
Detection of transparent box bases
5： 無托自動報警
Automatic alarm when without base
6: 分托機無托印字機自動停止下瓶 (與SY-AA型印字機聯動時)
Base separation machine and no-base printing machine automatically stop to load bottles (interlocking with SY-AA printing machine)
7: 印字機下瓶分托機自動給托 (與SY-AA型印字機聯動時)
Printing machine automatically loading bottles and base separation machine automatically loading bases (interlocking with SY-AA printing machine)
8: 印字機停機后分托機自動延時停機，印字機開機后分托機自動啟動 (與SY-AA型印字機聯動時)
Base separation machine automatically delay to stop after the printing machine stops, base separation machine automatically starts after turning on the printing machine (interlocking with SY-AA printing machine)
9: 分托機與印字機速度自動匹配(與SY-AA型印字機聯動時)
Speed of base separation machine and printing machine automatically matching (interlocking with SY-AA printing machine)
3、SY-B1型自動分托機技術參數
3. Technical parameters of automatic base separation machine SY-B1
1)適用規格：1-20ml藥托 (含兩個規格鍵，特殊規格定做)
Applicable specification: 1-20ml drug base (including two specification keys, customizing for special specifications)
2) 生產能力：1-20ml每分鐘能達到130托
Production capacity: 1-20ml, 130 bases per minute
3)耗電量：1.3KW
Power consumption: 1.3KW
4)外形尺長(長×寬×臺面高)米：1.75×1.35×(0.75-0.85)
Overall dimension (length × width ×table-board height) (m): 1.75×1.35× (0.75-0.85)
5)總重量：260公斤
Total weight: 260kg
6)壓縮空氣：不低于4kg/cm2
Compressed air: not lower than 4kg/cm2
7)塑料藥托要求：
Requirements of plastic drug base:
1、邊緣整齊規則、均勻 Neat and regular edge
2、無破損變形 No damage or deformation
3、邊緣吸合面不少于3.5mm Edge of absorbing surface no less than 3.5mm
4、厚度不小于0.15mm no less than 0.15mm in thickness
5、重量不小于1.9g no less than 1.9g in weight
采購中心
舒城县|
三明市|
迁安市|
肇庆市|
潜江市|
阿合奇县|
上饶县|
卓尼县|
尚志市|
渝中区|
容城县|
万全县|
平陆县|
文水县|
杭州市|
公主岭市|
松江区|
辽源市|
武安市|
吉木萨尔县|
广饶县|
惠安县|
宁武县|
金昌市|
伊吾县|
连州市|
新巴尔虎左旗|
靖江市|
台东县|
江津市|
台州市|
遵义县|
长丰县|
南华县|
益阳市|
北辰区|
嵩明县|
彰武县|
宜城市|
蒲城县|
金山区|
用戶評論
發布評論