High temperature high shear viscosity meter (SH/T0703, ASTM D5481 standard design and production, is used to measure the oil under the condition of high temperature and high shear viscosity values.At 150 ℃ under the condition of constant temperature, the injection tube sample injection by connecting tube of the pump to achieve sampling and scalar, and 0.5 3.5 MPa in inert gas under pressure through the 0.15 mm diameter of capillary, to simulate the practical application of high temperature and high shear.Experiments for the automatic recording time and stable air pressure, and automatically calculate the high temperature high shear viscosity of the sample under test values.

Test standard: SH/T0703, ASTM D5481

Power supply: 220 v, 50 hz

Temperature control: aluminum bath temperature

Temperature control range: experiment: 150 + 0.1 ℃

Viscosity pool number: 1 tube

Capillary inner diameter: 0.15 mm

The effective length of capillary: 16 to 18 mm

Pressure range: 0.5 to 3.5 MPa

Automatic detection, automatic printing results

1, the instrument for domestic initiative, no moving parts, low failure rate, low maintenance cost 

2, using special software, automatic test results;

3, glass capillary conform to the requirements of the standard, diameter of 0.15 mm, 16 mm long;

4, in the research for the purpose of users can set different shear rate and test temperature;

5, instrument using single tube detection, convenient and quick