AJ-DZA100預充式灌裝旋蓋機

產品特點Features

l 適用于各品牌RTU巢盒式預灌封注射器包材。Applicable to various brands of RTU nested prefilled syringe packaging materials.

l 表面采用SUS304不銹鋼材質，接觸物料部位采用SUS316L不銹鋼和醫用級硅橡膠，符合GMP規范要求。The surface is made of SUS304 stainless steel, and the parts in contact with materials are made of SUS316L stainless steel and medical grade silicone rubber, which meets the requirements of GMP regulations.

l 陶瓷柱塞泵實現定量灌裝，耐酸堿侵蝕，耐磨耐高溫，灌裝精度高。Ceramic plunger pump realizes quantitative filling, acid and alkali corrosion resistance, wear resistance and high temperature resistance, and high filling accuracy.

l 膠塞的排序和輸送通過振動盤實現，采用SUS316L不銹鋼潔凈盤，無清潔死角，頂盤可拆卸并支持滅菌。The sorting and conveying of the rubber stoppers is realized by the vibrating plate, which adopts SUS316L stainless steel clean plate, without cleaning dead angle, and the top plate is detachable and supports sterilization.

l 采用國際品牌電氣元件，實行無干擾模塊化控制，同步動作全部由伺服電機控制完成，準確可靠，操作方便。It adopts electrical components of international famous brands, implements non-interference modular control, and all synchronous actions are controlled by servo motors, which are accurate, reliable and easy to operate.

l 由PLC編程控制器控制電機運轉，人機交互界面實時監控顯示各工位的工作狀態，實時自動報警顯示故障位置、故障提示。The operation of the motor is controlled by the PLC programming controller, the human-computer interaction interface monitors and displays the working status of each station in real time, and the real-time automatic alarm displays the fault location and fault prompt.

l 多種灌裝劑量和灌裝方式可供選擇，支持多種配方參數儲存。A variety of filling doses and filling methods are available, supporting the storage of various formula parameters.

l 采用注料針頭隨液面上升式灌裝，防止藥液飛濺。The injection needle is used to fill with the liquid level rising to prevent the liquid medicine from splashing.

l 自動化程度高，人員配置少，少至2人。High degree of automation, less staffing, as few as 2 people.

AJ-DZA100預充式灌裝旋蓋機主要技術參數 Main Technical Parameters