除氨氮強酸型陽離子交換樹脂

           ISO-9001/ISO-14001/OHSAS-18000

Tulsion® T-42H 是均粒強酸型陽離子交換樹脂，氫H+/鈉Na+均粒陽離子交換樹脂，適用于高濃度氨氮去除，也可適用于其他濃度氨氮去除系統。

Tulsion® T-42H 強酸型陽離子交換樹脂，是一款具有較高的交換容量，同時擁有的物理及化學穩定品質?？梢詰?yīng)用于高濃度氨氮廢水處理中，出水氨氮可達到0.1ppm以下。

             Tulsion® T-42H 其均勻的顆粒直徑，具有傳統的離子交換樹脂無法取代的優勢，可以減少壓力損，延長樹脂壽命，保證出水品質。

典型特性（TYPICAL CHARACTERISTICS）：Tulsion T-42 H 

主體結構/Matrix structure                           Cross linked polystyrene

             型式(Type)                                                   Strong acid Cation exchange resin

物理型式/Physical form                                濕潤球狀/Moist spherical beads 

官能團/Functional group                              磺酸基/Sulphonic

粒徑Particle size (Mesh)                               Particle less than 0.3mm max. 1%

均勻系數(Uniformity coefficient)                 Max. 1.25

平均粒徑(Harmonic Mean size)                   580 + 50 um

全交換容量(Total Exchange Capacity)        1.80 meq/ ml

離子型式(Ionic form)                                   Hydrogen (H+)

膨脹係數(Swelling (approximay))          7% from Na+ to H+ form. 

濕度/Moisture content                                  53%

密度(Backwash settled density)                        800-840 g/l in H+ form
允許溫度(Maximum temp. stability)            120°C in H+ form

PH范圍/PH range                                               0 - 14

            溶解率(Solubility)                                             Insoluble in all common solvents

操作條件（OPERATION CONDITIONS）：    Tulsion T-42 H

zui大操作溫度(Operating temperature , max 0 C)                120
操作pH 范圍(Operating pH range )                                       0 – 14
zui小樹脂床高度(Bed depth , mini mm)                               800
zui大(Service flow rate ,Maxi )                                              120 m3/hr/ m3
逆洗水量(Backwash flow rate)                                             9 to 25 m3/hr/ m3
逆洗浮動空間(Back wash expansion)                                  40 to 75%
再生藥劑(Regenerant )                                                         HCl, H2SO4 for H+ form,
再生藥劑用量(Regeneration levels. )                                   30 to 120 gms HCl/ lit.
                                                                                            40 to 250 gms H2SO4/ lit.
再生藥劑濃度(Regeneration concentration)                          3 - 5% HCl, 1.5 to 3% H2SO4
zui少通再生藥劑時間(Regeneration Contact time, mini)      20 min.
再生流量(Regeneration flow rate )                                        5 to 16 m3/hr/ m3
Regeneration slow rinse                                                          2 BV mini.
快洗用水(Fast Rinse )                                                            Service flow rate.
快洗水量(Fast Rinse Volume)                                                 2 to 3 BV