Reco Induction Bearing Heaters

order on line

Dimensions

Model SC110D   |   Model SC  |   Model BC  |    Model BCS |   Raising Blocks

link to accessories( bearing sentry, pyrometer/thermometer) page

link to Operating Instructions (110K) | Feuillet D'Utilisation ( 110k)

The Reco Induction Bearing Heater is the superior method of expanding bearings, gears, sprockets, couplings and sleeves. For placement on shafts, it is the safest, quickest, most economical method of applying heat.

Induction heating is safe - no fire hazard from open flames or contamination from hot oil baths or forcing cold bearings on with a hammer

Evenly heats the bearing's inner race for longer life from proper installation

Quick, positive bearing installation - correct alignment is assured to reduce costly shutdown

Portable - just plug it in, requires less man hours

Steel case for durability and long life

Can be used to demagnetize bearings

Available in 3 models to handle most applications

Reco bearing heaters come complete with two standard cross bars for a wider range of bearings

All bearing heaters are single phase 60 hz units.

50 hz versions available as special request.

Back to Top of Page

SC110D Model

• Bearing Capacity 11" O.D x 4" wide.
• Computer chip automatically monitors and stabilizes temperature.
• Optional raising block available to increase bearing O.D. capacity to 14"
• All bearing heaters are single phase.
• Weight: 56 lbs

SC Model

• Choice of Either 110 V or 220V models
• Bearing capacity:11" O.D x 4" wide.
• Optional raising block available to increase bearing O.D. capacity to 14"
• All bearing heaters are single phase.
• Weight: 52 lbs.
• order on-line
  
  

order on-line 

Back to Top of Page

BC Model

• Choice of either 220V, 440V or 550V Models
• Bearing capacity: 22" OD x 7-1/2" wide
• Optional raising block available to increase bearing O.D. capacity to 32"
• Weight: 200 lbs.
• All bearing heaters are single phase.

warning: Do NOT use 3/4" bar with model BC220V

Back to Top of Page

BC Special Model

• Choice of either 220V, 440V or 550V Models
• Bearing capacity: 22" OD x 11-1/2" wide
• Weight: 235 lbs.
• All bearing heaters are single phase.

Optional raising block available to increase bearing O.D. capacity to 32"

CAUTION:
Bearing Heater should not be set within 24" of metal structures

To Demagnetize: 
Simply remove bar, turn heater on and pass bearing several times between the two upright columns without contacting columns.

Warning 
DO NOT operate an induction bearing heat if you have a heart pace-maker. The strong magnetic field emitted my the heater may affect operation of such devices.

Back to Top of Page

Raising Blocks

• provides additional height utilizing existing unit to handle larger bearing outside diameters
• SC raising blocks increase SC bearing heater capacity up to 14" OD.
• BC raising blocks increase BC and BC Special bearing heater capacity up to 32" OD

Back to Top of Page