德國BIKON-Technik GmbH收縮磁盤 鎖緊螺栓 聯軸器 法蘭連接 

德國蘇克SUCO Robert Scheuffele GmbH & Co. KG壓力開關和壓力傳感器

德國BIKON-Technik GmbH 鎖緊元件 鎖緊裝置

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

型號列表：

BIKON 1011-020-030

BIKON 1016-020-028
BIKON 5000-020-025
BIKON 1003-020-047
BIKON 1006-020-047
BIKON 2006-030-060
BIKON 4000-020-047
BIKON 7000.A-020-047
BIKON 7000.B-020-047
BIKON 8000-020-028
DOBIKON 1012-025-055
DOBIKON 1013-200-305
DOBIKON 1015.0-070-110
DOBIKON 1015.1-070-110
BIKON-Hydropress HPS-100

BIKON 1011

		Catalogue order Technical Support
Standard:
Shaft diameter:  d = 14 - 65 mm	transmissible torque is dependend from selection of class of screws
further sizes and special designs on request • solid system • self centering garanted • self-locking angle of cones • in the hub additional threads necessary Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking Element for shaft diameter d = 20 mm BIKON 1011-020-030

BIKON 1016

		Catalogue order Technical Support
Standard:
Shaft diameter: d = 13 - 40 mm	transmissible torque is dependend from slection of class of screws
further sizes and special designs on request • solid system • self centering garanted • self-locking angle of cones • for installation thread in shaft necessary Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking Element for shaft diameter d = 20 mm BIKON 1016-020-028

BIKON 5000

BIKON 5000-020-025

		Catalogue order Technical Support
Standard:
Shaft diameter: d = 6 - 500 mm
further sizes and special designs on request • elastic system • unit not ready for installation • additional parts and machining of the parts are required • not self-centering • in reference to large angles of cone in the not self-locking field high notch effect at the - shaft and high deviation from the theoretical surface pressure • in the area of precentering possible rust formation between shaft and hub ® problems in removing • with using of several BIKON 5000 rust formation starts already below the second element • small material use degree The BIKON 5000 is not contained in the catalogue. Delivery only on request. The BIKON 5000 is generally not recommended by BIKON-Technik GmbH. Alternative: BIKON 1011 All dates are valid only for BIKON- and DOBIKON-products Order information: Locking element for shaft diameter d = 20 mm BIKON 5000-020-025

BIKON-LOCK

		Catalogue order Technical Support
existing patents Standard:
Shaft diameter: d = 6 - 55 mm	transmissible torque: T = 34 - 4 000 Nm
further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • low notch effect and/or deviation from the theoretical surface pressure • small hub diameter • with a nut centrally tightening and removing • quick installation and removal Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products

			Catalogue order Technical Support
Standard:
Shaft diameter: d = 20 - 400 mm	transm. torque: T = 377 - 518 700 Nm	transm. bending moment: Mb = 0,35 • T	lim. flexion angle: aSp = 3 Minutes
further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • the screws are not addionally loaded after prestressing • low notch effect and/or deviation from the theoretical surface pressure • BIKON 1003 must not be used in component which are installed right-handed - and left-handed: for instance drums or rolls. Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 20 mm BIKON 1003-020-047

			Catalogue order Technical Support
Standard:
Shaft diameter: d = 20 - 400 mm	transm. torque: T = 290 - 399 000 Nm	transm. bending moment: Mb = 0,35 • T	lim. flexion angle: aSp = 3 Minutes
further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • the screws are not addionally loaded after prestressing • low notch effect and/or deviation from the theoretical surface pressure • axial defined installation of components Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 20 mm BIKON 1006-020-047   Catalogue order Technical Support existing patents Standard: Shaft diameter: d = 30 - 600 mm transm. torque: T = 1050 - 1038000 Nm transm. bending moment: Mb = 0,65 • T lim. flexion angle: aSp = 3 Minutes further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • the screws are not addionally loaded after prestressing • low notch effect and/or deviation from the theoretical surface pressure • axial defined installation of components • Standard locking device for conveyor drums and applications with large bending load Developer: BIKON-Technik GmbH This locking device was developed primarily for the application in conveyor drums. The high bending strength allows, with same drum dimensions and belt forces, smaller shaft diameters and bearings than the system DOBIKON 1015. On request we offer a support/help at the construction/design of drums. All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 30 mm BIKON 2006-030-060     Catalogue order Technical Support Standard: Shaft diameter: d = 20 - 1000 mm transm. torque: T = 317 - 2 970 000 Nm transm. bending moment: Mb = 0,25 • T lim. flexion angle: aSp = 1 - 2 Minuten further sizes and special designs on request • elastic system • one unit ready for installation • not self-centering • no self-locking angle of cones • the screws remain permanently loaded after installation • Connection is setting after a certain time, though not having been loaded • large notch effect and/or deviation from the theoretical surface pressure • with bending larger notch effect and the screws are additionally loaded • when permissible limiting flexion angle is exceed, spiral outward movement - from the hub is possible • circumferential crack formation, 2.5 to 3.0 mm deep, in shafts (Ø 420 mm) of belt - conveyor systems initiated in 1973 the new development of 3-part DOBIKON locking - systems with thick-walled rings towards the shaft (basic: the cone press fit connection) • in the area of precentering possible rust formation between shaft and hub ® problems in removing For new types of design it is possible and already practice to select alternatively guaranteed self-centering, rigid clamping sets BIKON 1003 or BIKON 1006. Instead of using several clamping sets arranged in series also BIKON 2006, DOBIKON 1012, DOBIKON 1013, or DOBIKON 1015 are possible. All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 20 mm BIKON 4000-020-047     Catalogue order Technical Support Standard: Shaft diameter: d = 20 - 240 mm transmissible torque: T = 380 - 139 900 Nm further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • the screws are not addionally loaded after prestressing • low notch effect and/or deviation from the theoretical surface pressure • alternative: BIKON 1003 All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 20 mm BIKON 7000.A-020-047     Catalogue order Technical Support Standard: Shaft diameter: d = 20 - 240 mm transmissible torque: T = 230 - 85 730 Nm further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • the screws are not addionally loaded after prestressing • low notch effect and/or deviation from the theoretical surface pressure • axial defined installation of components • alternative: BIKON 1006 or BIKON 2006 All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 20 mm BIKON 7000.B-020-047     Catalogue order Technical Support Standard: Shaft diameter: d = 6 - 90 mm transmissible torque BIKON 8000.A: T = 20 - 12 750 Nm transmissible torque BIKON 8000.B: T = 13 - 8 320 Nm further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • the screws are not addionally loaded after prestressing • low notch effect and/or deviation from the theoretical surface pressure • axial defined installation of components with BIKON 8000.B • relatively large lenghts of hub with small outer diameters All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 20 mm BIKON 8000-020-028   Catalogue order Technical Support existing patents Standard: Shaft diameter: d = 25 - 600 mm transm. torque: T = 840 - 1 760 000 Nm transm. bending moment: Mb = 0,5 • T lim. flexion angle: aSp = 2 - 2,5 Minutes further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • the screws are not addionally loaded after prestressing • low notch effect and/or deviation from the theoretical surface pressure • large transmissible bending moment • asymetric position of screws prevent wrong assembly Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 25 mm DOBIKON 1012-025-055 Catalogue order Technical Support existings patents Standard: Shaft diameter: d = 180 - 560 mm transm. torque: T = 223 000 - 2 260 000 Nm transm. bending moment: Mb = 0,50 • T lim. flexion angle: aSp = 2 - 2,5 Minutes further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • the screws are not addionally loaded after prestressing • low notch effect and/or deviation from the theoretical surface pressure • large transmissible torque and bending moment • large material use degree Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 200 mm DOBIKON 1013-200-305   Catalogue order Technical Support existing patents Standard: Shaft diameter: d = 70 - 600 mm transm. torque: T = 7 150 - 1 240 000 Nm transm. bending moment: Mb = 0,40 • T lim. flexion angle: aSp = 2 - 2,5 Minutes further sizes and special designs on request • same principle as DOBIKON 1012 • solid system • one unit ready for installation • self-centering garanted • not self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • asymetric position of screws prevent wrong assembly Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 70 mm DOBIKON 1015.0-070-110   Catalogue order Technical Support existing patents Standard: Shaft diameter: d = 70 - 600 mm transm. torque: T = 4 250 - 731 600 Nm transm. bending moment: Mb = 0,40 • T lim. flexion angle: aSp = 1 - 2 Minutes further sizes and special designs on request • same principle as DOBIKON 1012 • solid system • one unit ready for installation • self-centering garanted • not self-locking angle of cones • the screws must no more become tightened (controlled) after the installation • asymetric position of screws prevent wrong assembly • DOBIKON 1015.1 is leaned at the Rheinbraun locking devices developed from BIKON-Technik - GmbH. The small surface pressure favour rust formation and decrease the transmissible - bending moments / require larger shaft diameters • alternative for application in conveyor BIKON 2006 - (with same load lower material utilization) Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 70 mm DOBIKON 1015.1-070-110 Catalogue order Technical Support existing patents Standard: Shaft diameter: d = 100 - 500 mm transm. torque: adjustable with sliding way transm. bending moment: Mb = 0,65 • T lim. flexion angle: aSp = 3 Minutes further sizes and special designs on request • solid system • one unit ready for installation • self-centering garanted • self-locking angle of cones • installation and removal with hydraulik • quick installation an removal • the screws are not addionally loaded after prestressing • low notch effect and/or deviation from the theoretical surface pressure • large transmissible torque and bending moment • large material use degree Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking device for shaft diameter d = 20 mm BIKON-Hydropress HPS-100

SUCO Robert Scheuffele GmbH & Co. KG公司成立于1938年。其商業名SUCO在已經很好的建立起來。其發展，建立和兩大支柱產品-壓力監測（機械壓力開關，真空開關，電子壓力開關和壓力傳感器）和傳動技術（離心式離合器和剎車，電磁離合器和剎車）-的生產在Bietigheim-Bissingen，大約在Stuttgart北部20公里。

蘇克獲得了DIN EN ISO 9001:2008認證，并一直貫徹高質量標準。這已經被許多屬于不同工業部門的優良公司審計證明。產品的高品質通過高效率的銑削機，CNC車床，復雜的檢測工具和的測量設備獲得。優良的產品，高水平的客戶服務，合理的性價比確保蘇克系列產品獲得高的*。

SUCO Robert Scheuffele GmbH & Co. KG以廣泛的產品系列覆蓋了液壓控制和氣動系統產業。蘇克公司的機械壓力和真空開關，與其相配的插頭或管，電子壓力開關和壓力傳感器在整個行業中贏得了良好的聲譽。產品還涵蓋了防爆壓力開關，并依據新的ATEX標準制定。

蘇克公司液壓開關除了應用在液壓（液壓油）和氣動（氣體）系統外，還可以用在壓力測量或壓力監測在水，溶液，滅火劑，養料，易燃的氣體或柴油，燃料氣體如自然氣體或氣態或液態的介質。壓力開關的應用領域有產業設備，交通工具，機械工程的各種領域和生產車間以致特殊的自動化工業。

產品系列：

?壓力開關 hex 24
(0120, 0121, 0163, 0166, 0167, 0168, 0169)

壓力開關 hex 27
(0140, 0141, 0170, 0171, 0180, 0181, 0184, 0185, 0186, 0187, 0190, 0191, 0194, 0195, 0196, 0196)

預布線壓力開關
(0240 , 0241)

Pressure switch with integrated plug
(0110, 0112, 0114, 0116, 0118, 0120, 0122, 0111, 0113, 0115, 0117, 0119, 0121, 0123)

?壓力開關 30 A/F
(0159, 0161, 0162, 0175)

?防爆壓力開關
(0165, 0340, 0341)

真空開關
(0150, 0151)

電子壓力監視器
(0520, 0570)

壓力傳感器
(0605, 0610, 0620)

 
?壓力開關 hex 24
(0120, 0121, 0163, 0166, 0167, 0168, 0169)

 
?壓力開關 hex 27
(0140, 0141, 0170, 0171, 0180, 0181, 0184, 0185, 0186, 0187, 0190, 0191, 0194, 0195, 0196, 0196)

 
?預布線壓力開關
(0240 , 0241)

 
Pressure switch with integrated plug
(0110, 0112, 0114, 0116, 0118, 0120, 0122, 0111, 0113, 0115, 0117, 0119, 0121, 0123)

 
?壓力開關 30 A/F
(0159, 0161, 0162, 0175)

 
?防爆壓力開關
(0165, 0340, 0341)

 
?真空開關
(0150, 0151)

 
?電子壓力監視器
(0520, 0570)

 
?壓力傳感器
(0605, 0610, 0620)

GmbH收縮磁盤 鎖緊螺栓 聯軸器 法蘭連接

型號列表：

BIKON 1007-020-047

BIKON 1029-125-51

BIKON 1029-024-71

BIKON 1029-140-91

DOBIKON 2019-125-095

DOBIKON 2000-080
BIKON 1025-035-060

BIKON 1025-035-060

		Catalogue order Technical Support
Standard:
Diameter: d = 18 - 260 mm	transmissible torque: T = 96 - 214 000 Nm
further sizes and special designs on request • one unit ready for installation • self-locking angle of cones • the screws are not addionally loaded after prestressing • removal with release screws All dates are valid only for BIKON- and DOBIKON-products Order information: Shrink disk for shaft diameter d = 20 mm BIKON 1007-020-047 Catalogue order Technical Support Standard: Diameter: d = 125 - 500 mm transmissible torque: T = 11 500 - 1 167 000 Nm further sizes and special designs on request • one unit ready for installation • not self-locking angle of cones • the screws remain permanently loaded after installation All dates are valid only for BIKON- and DOBIKON-products Order information: Shrink disk for shaft diameter d = 125 mm BIKON 1029-125-51 Catalogue order Technical Support Standard: Diameter: d = 24 - 500 mm transmissible torque: T = 170 - 1 600 000 Nm further sizes and special designs on request • one unit ready for installation • not self-locking angle of cones • the screws remain permanently loaded after installation All dates are valid only for BIKON- and DOBIKON-products Order information: Shrink disk for shaft diameter d = 24 mm BIKON 1029-024-71   Catalogue order Technical Support Standard: Diameter: d = 140 - 500 mm transmissible torque: T = 20 900 - 2 080 000 Nm further sizes and special designs on request • one unit ready for installation • not self-locking angle of cones • the screws remain permanently loaded after installation All dates are valid only for BIKON- and DOBIKON-products Order information: Shrink disk for shaft diameter d = 140 mm BIKON 1029-140-91   Catalogue order Technical Support existing patents Standard: Diameter: d = 55 - 420 mm transmissible torque: T = 2 900 - 1 644 000 Nm further sizes and special designs on request • one unit ready for installation • not self-locking angle of cones • the screws are addionally loaded after prestressing • Shrink disk removes by itself after reduction of the stress of the screws • large transmissible torque • large material use degree Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Shrink disk with diameter d = 125 mm and shaft diameter dW = 95 mm DOBIKON 2019-125-095 Catalogue order Technical Support existing patents Standard: Diameter: ØB = 30 - 60 mm Lenght: L = 60 - 120 mm further sizes and special designs on request • one unit ready for installation • installation in bore free from backlash • transmission of torque due to form-fit connection • transmission of longitudinal forces due to frictional connection • few Press-Fit-Bolts instead of many screws • short machine downtime • with nickel-plated parts can frictional and form-fit connections be easily loosened even after years Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Press-Fit Bolt, bore ØK = 30 mm, Lenght L = 60 BIKON 2025-030-060 Catalogue order Technical Support existing patents Standard: Diameter: d = 80 - 280 mm transmissible torque: T = 13 800 - 563 500 Nm further sizes and special designs on request • one unit ready for installation • with self-locking angle of cones are possible large radial forces and thus - large transmissible forces • with not self-locking angles of cones the locking bolt removes automatically - after reductions of pressure of the screws, result: short downtimes • due to the design very good material use degree • no additional weight, since DOBIKON 2000 is employed in turned shaft/component Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Locking bolt for diameter d = 80 mm DOBIKON 2000-080 Catalogue order Technical Support existing patents Standard: Shaft diameter: d = 6 - 36 mm transmissible torque: T = 20 - 850 Nm (µH = 0,12) further sizes and special designs on request • one unit ready for installation • basis: rotary cone • Installation by turning of the outer ring with the angle ße • rigid system in torque and bending • displace of angle of two shafts can not be balanced • large material use degree • design makes high rotation speeds possible Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products     Catalogue order Technical Support   BIKON 10 BIKON 20 BIKON 30   Standard: 8 Sizes   Shaft diameter: d = 95 - 290 mm transmissible torque: T = 29 000 - 517 000 Nm further sizes and special designs on request • one unit ready for installation • Locking device DOBIKON 1014 included • Locking device DOBIKON 1014 with self-locking angle of cones • the screws are not addionally loaded after prestressing • rigid system in torque and bending • displace of angle of two shafts can not be balanced • large transmissible torque Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products     Catalogue order Technical Support existing patents   one-sided two-sided     Standard: Shaft diameter: d = 100 - 500 mm transmissible torque: adjustable with sliding way of the locking device further sizes and special designs on request • one unit ready for installation • locking device BIKON-Hydropress (mechanical-hydraulic) and Press-Fit-Bolt BIKON 1025 included • quick installation and removal • the screws are not addionally loaded after prestressing • rigid system in torque and bending • large transmissible torque and bending moment • very large material use degree • displace of angle of two shafts can not be balanced Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Further information on request. Für weitere Fragen und Informationen bitten wir um Rücksprache   Catalogue order Technical Support existing patents Standard: Diameter:  ØK = 35 - 75 mm Lenght: L = 60 - 160 m • one unit ready for installation • installation in bore free from backlash • transmission of torque due to form-fit connection • transmission of longitudinal forces due to frictional connection • few Press-Fit-Bolts instead of many screws • short machine downtime • with nickel-plated parts can frictional and form-fit connections be easily loosened even after years Developer: BIKON-Technik GmbH All dates are valid only for BIKON- and DOBIKON-products Order information: Press-Fit Bolt, bore ØK = 35 mm, Lenght L = 60 BIKON 1025-035-060