瑞士GUDEL直線驅動部件 驅動系統 減速器 齒輪齒條

德國美翠METREL GmbH測試儀器

德國vatron gmbh有色金屬行業產品

厚度

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

thickness.mon

The precise thickness gauge is a multifunctional usable system for measurement of thickness of various materials. High precision is achieved by using our patented optical measurement method. Compared with conventional touching measurement techniques there is no abrasion occurring.

Process / Properties

The top and the bottom surface of the object to be measured is illuminated with structured light and captured by a single sensor simultaneously. The received signal is proportional to the thickness of the material and independent of the materials surface

thickness.mon consists of a single sensor for acquiring the measurement signal. Therefore the accuracy is independent of possible temperature changes. The system can be delivered as a simple thickness sensor as well as an integrated fully automated solution. With the wide range of available options thickness.mon can be adapted to your process optimally – and this at an attractive price.

Versions

• Type of measurement manual / automatic
• Measurement speed 12 measurements per second
• Measurement position 5 to 300mm
• Accuracy ± 10µm at 2σ
• Typical measurement ranges 0,1 to 4 mm / 3 to 12 mm thickness of material (also other dimensions on request)
• Dimensions 200 mm x 200 mm x 750 mm

Advantages

• Non destructive and non abrasive by contact less measurement
• High precision by our patented measurement method
• No expensive safety requirements necessary
• Modular design from simple thickness gauge up to integrated fully automated solutions
• Usable for various surfaces by automated parameter adaption
• Very appealing cost / performance ratio
   

Open preview picture of file

infosheet thickness.mon [327 KByte/pdf]  

drive.mon

In every production facility are different abrasion-bound mechanical parts (e.g. gearboxes, bearings, gears, shafts,..) in use at most neuralgic places. The maintenance crew trusts well proven and reliable condition monitoring tools to be able to provide an untroubled operation.

drive.mon is a valuable maintenance tool and allows early fault detection of drive trains. Vibrations and other signals will be acquired and interpreted automatically utilising modern frequency analysis algorithms. When faults of bearings, gears, shafts, couplings and many more happen, d.mon sends notifications to the responsible maintenance crew.
The maintenance staff members are able to plan the repair, spare parts can be ordered in time and sudden production stops will be history.
Due to the use of high performance data acquisition modules, which are connected to the analysis server via optical waveguides, even vast production plants can be monitored easily.

Features

• Automatic, adjustable signal analysis
• Long term trending for every single part
• Automatic alarming features
• Easy extendable
• Easy to use frequency analysis tools
• Most flexible data acquisition (vibration, current, temperature,….)
• Unlimited number of clients
   

Advantages

• High-End online-monitoring at a reasonable price
• Avoidance of unplanned production stops
• Precise knowledge of the plant‘s condition
• Easy adaptation by means of modular, well proven industrial grade hardware
• Intuitive software handling for users
• Quick access due to web technology
• Considers varying operation conditions

infosheet drive.mon [680 KByte/pdf]  

shape.sol

The shape.sol light-sectioning sensor is applied to contact-free geometry measurement in industrial environment.

Process

The working principle of shape.sol is based on light-sectioning. A laser projects a light plane onto the object to be measured. The resulting light section is acquired with an industrial camera. The geometry of the object is determind by processing the camera image.

Characteristics

The shape.sol sensor is applied to measure the 3-dimensional geometry of objects. The laser module and/or the camera system are exchangeable. Thus, the sensor can be flexibly customised to various measurement tasks.

Technical Data (Standard Version)

Camera:

• opt. resolution: 1400 x 1040 pixel (monochrome)
• acquisition rate: 30 Hz

Laser module:

• wavelength: 660 nm
• output power: ≤ 40 mW

Sensor:

• working distance: 500 - 1000 mm
• measurement field (w x d): 400 x 300 mm
• resolution: 0.05 mm
• operating temperature: 10°C - 50°C

Advantages

• contact-free and non-destructive measurement of 3-dimensional geometry
• easy integrability in production lines
• suitable for industrial applications due to:
• protection class: IP65
• power supply: 24V DC
• data interface: Gigabit Ethernet

infosheet shape.sol    [355 KByte/pdf]

torque.mon

The dynamic monitoring of torque plays a decisive role in plant monitoring systems because problems arising in the production process or in the drive components manifest themselves predominantly in the form of torque fluctuations.

Torque observation can lead to the prevention of breakdowns, to the effect that maintenance times can be planned and production increased.
The torque (or tension) is measured by means of strain gauges. The energy and data transfer occurs without any contact. Operational security is guaranteed because of the robust construction. A battery-driven base version provides data for testing and optimization purposes for about one month without changing batteries.
The non-contact data transfer can be used universally. Applications for this transfer system are predominantly in systems where measurements are to be taken on moving parts.

Characteristics

• Measurements are possible under nearly any environmental condition
• Remote calibration (not available with battery version)
• The measurement data transfer system can be adapted to other sensors
• Rotational acceleration up to 100 g (optionally higher)
• Maximum shaft temperature of 100 °C (optionally up to 220 °C), maximum surrounding temperature of 100 °C
• Minimum shaft diameter: 25 mm
• Measurement of the dynamic torque up to 1 kHz
• Adjustable amplification and offset

Advantages

• prevention of unplanned production stops
• exact knowledge of system condition
• industrial-suited, very robust system
• high temperature stability (up to 100 °C)

Open preview picture of file

infosheet torque.mon [279 KByte/pdf]  

ironfine.checker

The measurement of the amount of ironfine on the steel strip surface is a very important tool for quality control.
This device offers the possibility to detect iron-fines quickly and precisely.

Process

The new method is based on a standard method for the characterization of steel strip cleanliness, the so called "Scotch-Tape™-Test". For this test a sticky tape (“Scotch Tape TM”) is applied to the steel strip surface and peeled off again. The tape is pushed through the magnetic field of a yoke. The field has to be strong enough to bring the ironfine particles to the state of magnetic saturation. Inside the yoke is a measuring coil, in which a voltage pulse is induced during the pass of the sample. From the intensity of this pulse we are able to calculate the amount of the ironfine on the tape

Properties

• Detection of iron-fines down to ap. 4 mg/m²
• Easy to use Windows™-program
• Results can be easily integrated in a customers database
• Very quick method

Advantages

• Non destructive measurement
• Precise results
• Control of ironfine for product and roll optimisation
• Quick measurements

Open preview picture of file

infosheet ironfine.checker [328 KByte/pdf]  

coating.sim

The Laboratory Roll Coater with three Rolls allows both simulation and reproduction of production-conditions of a coil-coating-plant on flat probes, testing and optimisation of enamels (groundings and lacquers) and parameters for industrial coating.

The enamel is evenly spread over the probe by three application rolls and gets stripped off the last roll by a blade, then it returns to the circulation-pump.
A conveyor belt drives the probe through the roll-block where it gets coated by the last application roll with the pre-adjusted coating-film.

Possibilities

• Arrangement for EX-Zone 1-T3 (optional)
• Reverse- and forward-operation mode
• 3-rolls operation mode
• Simulated and real 2-rolls operation mode (quick adaptation)
• The enamel circulation system allows quick and easy adjustments to coating-thickness and composite
• Online data (roll and conveyor speed, roll-down forces and roll-distances) allow direct intervention into the surface coating
• Reproducibility of the parameters
• Low effort for service and cleaning because of simple assembly

Advantages

• Little amount of enamel necessary
• Testing of enamel at the laboratory
• Research of parameters for industrial use

infosheet coating.sim    [154 KByte/pdf] 

MI6401環境綜合測試儀	MI6301系列音頻分析儀	MI6201系列環境綜合測試儀	MI6000系列環境綜合測試儀概述
MI5100光纖測試套件	MI2016六類線綜合測試儀	MI2014網絡萬用表	MI2170安規測試儀
MI2143安規測試儀	MI2142醫療儀器安規測試儀	MI2140、MI2141安規測試儀	MI2094安規測試儀
柔性電流鉗系列產品	P50、P15多量程電流鉗	MI4100 電力監控儀表	MI2392 手持式三相電力質量分析儀
MI2130電壓事件記錄儀	MI2092、MI2192、MI2292三相電力分析儀	MI3203 5KV高壓數字兆歐表	MI3201 5KV高壓大功率數字

MI6401環境綜合測試儀	MI6301系列音頻分析儀	MI6201系列環境綜合測試儀	MI6000系列環境綜合測試儀概述
MI5100光纖測試套件	MI2016六類線綜合測試儀	MI2014網絡萬用表	MI2170安規測試儀
MI2143安規測試儀	MI2142醫療儀器安規測試儀	MI2140、MI2141安規測試儀	MI2094安規測試儀
柔性電流鉗系列產品	P50、P15多量程電流鉗	MI4100 電力監控儀表	MI2392 手持式三相電力質量分析儀
MI2130電壓事件記錄儀	MI2092、MI2192、MI2292三相電力分析儀	MI3203 5KV高壓數字兆歐表	MI3201 5KV高壓大功率數字

MI2093線路尋蹤器

MI2088接地絕緣測試儀

MI2086電氣綜合測試儀

MA2067建筑電氣安裝測試

產品系列：

自行加工生產的部件,驅動系統,減速器,齒輪齒條

GÜDEL公司為自動化生產，加工行業和許多特殊的機床生產提供了支持高速度，高加速度和精確定位的部件產品,包括了：直線驅動部件，各種模數規格的齒輪齒條，常規蝸輪蝸桿減速器，高精密減速器，圓錐齒輪減速器和超高精密減速器 等不同系列

直線驅動部件

Pict. 1: GÜDEL 直線驅動中型部件

GüDEL 的直線驅動部件系統包括了中型和重型負載等不同規格負載可以從10kg到幾噸甚至更大，配有各種不同尺寸和型號的小滾輪，線性導軌，型材，自動潤滑裝備以及各種常規備品備件. 抗腐蝕 后綴為..R系列的元件是使用不銹鋼制造.
 

• 應用于中等負載的導軌系統
  應用于中等負載的導軌系統是基于標準的導軌滾輪和V型導軌。系統特別適合需要,高速低摩擦精確定位和低噪音的運行。

Pict. 2: GÜDEL 直線驅動重型部件

• 應用于重等負載的導軌系統
  我們的重負載導軌系統是基于標準的硬化和磨削表面的平軌。 系統特別適用于中等頻率，高負載，低摩擦，精確定位和安靜工作的應用。完整的齒條和適用于伺服電機的減速器，使他可以使用與復雜的重負載目標.

Pict. 3: GÜDEL 直線驅動部件 monoRoll

• 線形導軌系統
  新的，還未獲得的monoRoll 導軌系統，是建立在安裝在緊密的支架內的兩個菱形V導向的滾輪沿導軌滾動的原理上。這些V導向的滾輪擁有完整的預緊的雙倍角度接觸的球形軸承從而表現出了高負載和高的硬度。兩個V導向滾輪中的一個是緊固在支架上的（在主要負載方向的），另一個通過偏心螺栓可以調整為松弛或預緊在導軌上。擦拭單元和/或潤滑擦拭單元如需要可以作為額外的選項安裝在滾輪支架上.

Pict. 4: GÜDEL 驅動技術, 齒輪齒條

GÜDEL的驅動技術包括了很多各種模數規格的齒輪齒條，常規蝸輪蝸桿減速器，高精密減速器，圓錐齒輪減速器和超高精密減速器.
 

• 齒輪齒條
  GÜDEL 公司也提供了多種不同規格的蝸輪蝸桿和錐齒輪，同時在材料，承載和質量方面為客戶提供了多種選擇. 詳細情況可見型錄.

Pict. 5: GÜDEL 伺服蝸輪蝸桿減速器#

• 伺服蝸輪蝸桿減速器
  在所有的產品中，我們都采取了伺服控制驅動技術，保證了產品的高質量和高壽命，我們的產品在很多情況下都保持了 24 小時不間斷的工作。豐富的生產經驗，對產品的高質量生產控制和對客戶的認真負責態度，使得GÜDEL的產品在任何時候都可以非常放心地使用。

Pict. 6: GÜDEL 伺服行星齒輪減速器

• 伺服行星齒輪減速器
  伺服行星齒輪減速器擇合高輸入扭矩, 它提供了低背隙, 準確的精密定位控制, 低噪音, 于外觀及結構設計上也力求輕薄短小.

Pict. 7: GÜDEL 超高精密減速器系列

• 超高精密減速器#
  4種不同尺寸，扭轉間隙 (1 arc min)，超高精度，并可以重新校準。

其他產品:
 

• 傘齒輪箱#
• 直傘齒: 不銹鋼, 硬化和磨削處理#
• 蝸輪蝸桿: 中空/軸式輸出
• 傘齒輪: 鋼/塑料#