国产人妻自拍在线,日本1级片中文字幕。

參考價	面議

產地	進口	產品新舊	全新

詳細介紹

德國Hp Technik GmbH工業泵D

德國Hp Technik GmbH工業泵C

產品系列：

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

Series VBR; With Intergrated Overflow Valve and Bypass

Series VBR Technical Selection Chart: Scaled Drawings

Direction of rotation viewed from Shaft
I = indirect – counterclockwise
D= direct – clockwise

The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per the size chart/sheet when ordering!

hp internal gear pumps up to 40 bar (Direction I = indirect - counterclockwise)

Pump Series VBR Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano- meter Con- nection	max. allowed Pump RPM (min^-1) at I/D	Net weight (kg) at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. I	at 9 bar	at 30 bar	at 40 bar	Article No. I
VBR P	45	30	20	011/0011	90	60	50	013/0011	25	12	3/8"	–	2800	2,5
VBR M	80	60	50	011/0012	160	130	120	013/0012	25	12	3/8"	–	2800	2,5
VBR G	120	100	80	011/0013	240	200	190	013/0013	25	12	3/8"	–	2800	2,5
VBR F	160	140	120	011/0014	320	270	260	013/0014	25	12	3/8"	–	2800	2,5

VBGR PP	150	100	80	011/0065	300	240	210	013/0040	38	12	½"	–	2800	3,3
VBGR PZ	200	160	140	011/0062	400	310	280	013/0041	38	12	½"	–	2800	3,3
VBGR P	300	240	200	011/0025	600	520	480	013/0023	38	12	½"	–	2800	3,3
VBGR MZ	–	–	–	–	850	750	700	013/0072	38	12	½"	–	2800	3,3
VBGR M	450	390	360	011/0026	900	850	730	013/0024	38	12	½"	–	2800	3,3
VBGR GZ	–	–	–	–	1100	1000	870	013/0042	38	12	½"	–	2800	3,3
VBGR G	600	540	480	011/0027	–	–	–	–	38	12	½"	–	1680	3,3

VBHR P	1000	700	600	011/0037	–	–	–	–	56	18	¾"	–	1680	7,3
VBHR M	1500	1200	1000	011/0038	–	–	–	–	56	18	¾"	–	1680	7,3
VBHR G	2000	1700	1400	011/0039	–	–	–	–	56	18	¾"	–	1680	7,3

VBHGR P	3000	2200	2000	011/0049	–	–	–	–	75	22	1 "	¼"	1400	18,6
VBHGR PZ	3700	3000	2700	011/0090	–	–	–	–	75	22	1"	¼"	1400	18,6
VBHGR M	4500	3600	3200	011/0050	–	–	–	–	75	22	1"	¼"	1400	18,6
VBHGR G	6000	4800	–	011/0051	–	–	–	–	75	22	1"	¼"	1400	18,6

hp internal gear pumps up to 40 bar (Direction D = direct - clockwise)

Pump Series VBR Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano-meter Con-nection	Heating Capacity H1 in Watt at 220V, 50Hz at I/D	Initial Pump Break- away Torque at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. D	at 9 bar	at 30 bar	at 40 bar	Article No. D
VBR P	45	30	20	012/0011	90	60	50	014/0011	25	12	3/8"	–	100	1,2
VBR M	80	60	50	012/0012	160	130	120	014/0012	25	12	3/8"	–	100	1,2
VBR G	120	100	80	012/0013	240	200	190	014/0013	25	12	3/8"	–	100	1,2
VBR F	160	140	120	012/0014	320	270	260	014/0014	25	12	3/8"	–	100	1,2

VBGR PP	150	100	80	012/0065	300	240	210	014/0040	38	12	½"	–	100	1,6
VBGR PZ	200	160	140	012/0062	400	310	280	014/0041	38	12	½"	–	100	1,6
VBGR P	300	240	200	012/0025	600	520	480	014/0023	38	12	½"	–	100	1,6
VBGR MZ	–	–	–	–	850	750	700	014/0072	38	12	½"	–	100	1,6
VBGR M	450	390	360	012/0026	900	800	730	014/0024	38	12	½"	–	100	1,6
VBGR GZ	–	–	–	–	1100	930	870	014/0042	38	12	½"	–	100	1,6
VBGR G	600	540	480	012/0027	–	–	–	–	38	12	½"	–	100	1,6

VBHR P	1000	700	600	012/0037	–	–	–	–	56	18	¾"	–	160	3,2
VBHR M	1500	1200	1000	012/0038	–	–	–	–	56	18	¾"	–	160	3,2
VBHR G	2000	1700	1400	012/0039	–	–	–	–	56	18	¾"	–	160	3,2

VBHGR P	3000	2200	2000	012/0049	–	–	–	–	75	22	1"	¼"	280	4,6
VBHGR PZ	3700	3000	2700	012/0090	–	–	–	–	75	22	1"	¼"	280	4,6
VBHGR M	4500	3600	3200	012/0050	–	–	–	–	75	22	1"	¼"	280	4,6
VBHGR G	6000	4800	–	012/0051	–	–	–	–	75	22	1"	¼"	280	4,6

To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

Model	Discharge l/h		a1	a2	a3	b1	c1	c2	c3	c4	c5	c6	c7	c8
Model	1400 min^-1	2800 min^-1	a1	a2	a3	b1	c1	c2	c3	c4	c5	c6	c7	c8
25	45 - 160	90 - 320	35,5	20	33	51	41,5	14	16	40	20	55,5	76	131,5
38	150 - 600	300 - 1100	39,5	30	38	70	55,5	14	16	40	20	69,5	76	145,5
56	1000 - 2000	–	48,5	38	45	96	71,5	15	18	79	27	86,5	124	210,5
75	3000 - 6000	–	62,5	85	70	115	129,5	18	25	65	37	147,5	127	274,5

Model	Discharge l/h		d1	sw	e	d2	d3	e1	*e2	f1	f2	f3	f4	f5
Model	1400 min^-1	2800 min^-1	d1	sw	e	d2	d3	e1	*e2	f1	f2	f3	f4	f5
25	45 - 160	90 - 320	12	27	31,2	54	80	G 3/8"	G 3/8"	139	32	90	17	26
38	150 - 600	300 - 1100	12	27	31,2	54	80	G ½"	G 3/8"	139	32	90	17	23
56	1000 - 2000	–	18	46	53	60	100	G ¾"	G 3/8"	162	26,5	118	17,5	25,5
75	3000 - 6000	–	22	55	63,5	80	120	G 1" ¹⁾	G 3/8"	211	36	150	25	35

Model	Discharge l/h		f6	f7	f8	f9	g1	g2	g3	g4	g5	h1	h2	h3
Model	1400 min^-1	2800 min^-1	f6	f7	f8	f9	g1	g2	g3	g4	g5	h1	h2	h3
25	45 - 160	90 - 320	38	92	140	18	30	33	63	27	90	11	13	13
38	150 - 600	300 - 1100	44	92	140	18	32	35	67	27	94	11	13	13
56	1000 - 2000	–	67	120	171	26,5	38	42	80	35	115	13	13	25
75	3000 - 6000	–	80	150	218	32	18	62	80	40	120	14,5	15	–

VBHGR model with G ¼" manometer connection at the face.
1) Given a motive force of 75 = 3000 to 6000 l/h, the suction connection at the side is G1 ½".

Series NV; With Intergrated Overflow Valve and Bypass

Series NV Technical Selection Chart: Scaled Drawings

Direction of rotation viewed from Shaft
I = indirect – counterclockwise
D= direct – clockwise

The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per the size chart/sheet when ordering!

hp internal gear pumps up to 40 bar (Direction I = indirect - counterclockwise)

Pump Series NV Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano-meter Con-nection	max. allowed Pump RPM (min^-1) at I/D	Net weight (kg) at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. I	at 9 bar	at 30 bar	at 40 bar	Article No. I
NVBR P	45	30	20	011/0015	90	60	50	013/0015	25	12	3/8"	¼"	2800	2,8
NVBR M	80	60	50	011/0016	160	130	120	013/0016	25	12	3/8"	¼"	2800	2,8
NVBR G	120	100	80	011/0017	240	200	190	013/0017	25	12	3/8"	¼"	2800	2,8
NVBR F	160	140	120	011/0018	320	270	260	013/0018	25	12	3/8"	¼"	2800	2,8

NVBGR PP	150	100	80	011/0075	300	240	210	013/0025	38	12	½"	¼"	2800	3,8
NVBGR PZ	200	160	140	011/0076	400	310	280	013/0028	38	12	½"	¼"	2800	3,8
NVBGR P	300	240	200	011/0028	600	520	480	013/0026	38	12	½"	¼"	2800	3,8
NVBGR MZ	–	–	–	–	850	750	700	013/0074	38	12	½"	¼"	2800	3,8
NVBGR M	450	390	360	011/0029	900	850	730	013/0027	38	12	½"	¼"	2800	3,8
NVBGR GZ	–	–	–	–	1100	1000	870	013/0029	38	12	½"	¼"	2800	3,8
NVBGR G	600	540	480	011/0030	–	–	–	–	38	12	½"	¼"	1680	3,8

NVBHR P	1000	700	600	011/0040	–	–	–	–	56	18	¾"	¼"	1400	8,6
NVBHR M	1500	1200	1000	011/0041	–	–	–	–	56	18	¾"	¼"	1400	8,6
NVBHR G	2000	1700	1400	011/0042	–	–	–	–	56	18	¾"	¼"	1400	8,6

hp internal gear pumps up to 40 bar (Direction D = direct - clockwise)

Pump Series NV Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano-meter Con-nection	Heating Capacity H1 in Watt at 220V, 50Hz at I/D	Initial Pump Break- away Torque at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. D	at 9 bar	at 30 bar	at 40 bar	Article No. D
NVBR P	45	30	20	012/0015	90	60	50	014/0015	25	12	3/8"	¼"	100	1,2
NVBR M	80	60	50	012/0016	160	130	120	014/0016	25	12	3/8"	¼"	100	1,2
NVBR G	120	100	80	012/0017	240	200	190	014/0017	25	12	3/8"	¼"	100	1,2
NVBR F	160	140	120	012/0018	320	270	260	014/0018	25	12	3/8"	¼"	100	1,2

NVBGR PP	150	100	80	012/0075	300	240	210	014/0025	38	12	½"	¼"	100	1,6
NVBGR PZ	200	160	140	012/0076	400	310	280	014/0028	38	12	½"	¼"	100	1,6
NVBGR P	300	240	200	012/0028	600	520	480	014/0026	38	12	½"	¼"	100	1,6
NVBGR MZ	–	–	–	–	850	750	700	014/0074	38	12	½"	¼"	100	1,6
NVBGR M	450	390	360	012/0029	900	800	730	014/0027	38	12	½"	¼"	100	1,6
NVBGR GZ	–	–	–	–	1100	930	870	014/0029	38	12	½"	¼"	100	1,6
NVBGR G	600	540	480	012/0030	–	–	–	–	38	12	½"	¼"	100	1,6

NVBHR P	1000	700	600	012/0040	–	–	–	–	56	18	¾"	¼"	160	3,2
NVBHR M	1500	1200	1000	012/0041	–	–	–	–	56	18	¾"	¼"	160	3,2
NVBHR G	2000	1700	1400	012/0042	–	–	–	–	56	18	¾"	¼"	160	3,2

Gear Rotor Size	Discharge l/h		a1	a2	a3	b1	c1	c2	c3	c4	c5	c6	c7
Gear Rotor Size	1400 min^-1	2800 min^-1	a1	a2	a3	b1	c1	c2	c3	c4	c5	c6	c7
25	45 - 160	90 - 320	35,5	20	33	51	41,5	14	16	40	20	55,5	76
38	150 - 600	300 - 1100	39,5	30	38	70	55,5	14	16	40	20	69,5	76
56	1000 - 2000	–	48,5	38	45	96	71,5	15	18	79	27	86,5	124

Gear Rotor Size	Discharge I/h		c8	d1	sw/e	d2	d3	e1	*e2	f1	f2	f3	f4
Gear Rotor Size	1400 min^-1	2800 min^-1	c8	d1	sw/e	d2	d3	e1	*e2	f1	f2	f3	f4
25	45 - 160	90 - 320	131,5	12	27/31,2	54	80	G 3/8"	G 3/8"	165	32	116	17
38	150 - 600	300 - 1100	145,5	12	27/31,2	54	80	G ½"	G 3/8"	165	32	116	17
56	1000 - 2000	–	210,5	18	46/53,1	60	100	G ¾"	G 3/8"	194	26,5	150	17,5

Gear Rotor Size	Discharge l/h		f5	f6	f7	f8	f9	g1	g2	g3	h1	h2	h3
Gear Rotor Size	1400 min^-1	2800 min^-1	f5	f6	f7	f8	f9	g1	g2	g3	h1	h2	h3
25	45 - 160	90 - 320	25,5	32,5	92	166	18	40	27	67	11	13	13
38	150 - 600	300 - 1100	23	35	92	166	18	45	27	72	11	13	13
56	1000 - 2000	–	25	50	120	203	26,5	65	40	105	13	13	25

With G ¼" manometer connection at the face.

Series NV; With Intergrated Overflow Valve and Bypass

hp internal gear pumps up to 40 bar (Direction I = indirect - counterclockwise)

Pump Series NV Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano-meter Con-nection	max. allowed Pump RPM (min^-1) at I/D	Net weight (kg) at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. I	at 9 bar	at 30 bar	at 40 bar	Article No. I
NVBR P	45	30	20	011/0015	90	60	50	013/0015	25	12	3/8"	¼"	2800	2,8
NVBR M	80	60	50	011/0016	160	130	120	013/0016	25	12	3/8"	¼"	2800	2,8
NVBR G	120	100	80	011/0017	240	200	190	013/0017	25	12	3/8"	¼"	2800	2,8
NVBR F	160	140	120	011/0018	320	270	260	013/0018	25	12	3/8"	¼"	2800	2,8

NVBGR PP	150	100	80	011/0075	300	240	210	013/0025	38	12	½"	¼"	2800	3,8
NVBGR PZ	200	160	140	011/0076	400	310	280	013/0028	38	12	½"	¼"	2800	3,8
NVBGR P	300	240	200	011/0028	600	520	480	013/0026	38	12	½"	¼"	2800	3,8
NVBGR MZ	–	–	–	–	850	750	700	013/0074	38	12	½"	¼"	2800	3,8
NVBGR M	450	390	360	011/0029	900	850	730	013/0027	38	12	½"	¼"	2800	3,8
NVBGR GZ	–	–	–	–	1100	1000	870	013/0029	38	12	½"	¼"	2800	3,8
NVBGR G	600	540	480	011/0030	–	–	–	–	38	12	½"	¼"	1680	3,8

NVBHR P	1000	700	600	011/0040	–	–	–	–	56	18	¾"	¼"	1400	8,6
NVBHR M	1500	1200	1000	011/0041	–	–	–	–	56	18	¾"	¼"	1400	8,6
NVBHR G	2000	1700	1400	011/0042	–	–	–	–	56	18	¾"	¼"	1400	8,6

hp internal gear pumps up to 40 bar (Direction D = direct - clockwise)

Pump Series NV Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano-meter Con-nection	Heating Capacity H1 in Watt at 220V, 50Hz at I/D	Initial Pump Break- away Torque at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. D	at 9 bar	at 30 bar	at 40 bar	Article No. D
NVBR P	45	30	20	012/0015	90	60	50	014/0015	25	12	3/8"	¼"	100	1,2
NVBR M	80	60	50	012/0016	160	130	120	014/0016	25	12	3/8"	¼"	100	1,2
NVBR G	120	100	80	012/0017	240	200	190	014/0017	25	12	3/8"	¼"	100	1,2
NVBR F	160	140	120	012/0018	320	270	260	014/0018	25	12	3/8"	¼"	100	1,2

NVBGR PP	150	100	80	012/0075	300	240	210	014/0025	38	12	½"	¼"	100	1,6
NVBGR PZ	200	160	140	012/0076	400	310	280	014/0028	38	12	½"	¼"	100	1,6
NVBGR P	300	240	200	012/0028	600	520	480	014/0026	38	12	½"	¼"	100	1,6
NVBGR MZ	–	–	–	–	850	750	700	014/0074	38	12	½"	¼"	100	1,6
NVBGR M	450	390	360	012/0029	900	800	730	014/0027	38	12	½"	¼"	100	1,6
NVBGR GZ	–	–	–	–	1100	930	870	014/0029	38	12	½"	¼"	100	1,6
NVBGR G	600	540	480	012/0030	–	–	–	–	38	12	½"	¼"	100	1,6

NVBHR P	1000	700	600	012/0040	–	–	–	–	56	18	¾"	¼"	160	3,2
NVBHR M	1500	1200	1000	012/0041	–	–	–	–	56	18	¾"	¼"	160	3,2
NVBHR G	2000	1700	1400	012/0042	–	–	–	–	56	18	¾"	¼"	160	3,2

Gear Rotor Size	Discharge l/h		a1	a2	a3	b1	c1	c2	c3	c4	c5	c6	c7
Gear Rotor Size	1400 min^-1	2800 min^-1	a1	a2	a3	b1	c1	c2	c3	c4	c5	c6	c7
25	45 - 160	90 - 320	35,5	20	33	51	41,5	14	16	40	20	55,5	76
38	150 - 600	300 - 1100	39,5	30	38	70	55,5	14	16	40	20	69,5	76
56	1000 - 2000	–	48,5	38	45	96	71,5	15	18	79	27	86,5	124

Gear Rotor Size	Discharge I/h		c8	d1	sw/e	d2	d3	e1	*e2	f1	f2	f3	f4
Gear Rotor Size	1400 min^-1	2800 min^-1	c8	d1	sw/e	d2	d3	e1	*e2	f1	f2	f3	f4
25	45 - 160	90 - 320	131,5	12	27/31,2	54	80	G 3/8"	G 3/8"	165	32	116	17
38	150 - 600	300 - 1100	145,5	12	27/31,2	54	80	G ½"	G 3/8"	165	32	116	17
56	1000 - 2000	–	210,5	18	46/53,1	60	100	G ¾"	G 3/8"	194	26,5	150	17,5

Gear Rotor Size	Discharge l/h		f5	f6	f7	f8	f9	g1	g2	g3	h1	h2	h3
Gear Rotor Size	1400 min^-1	2800 min^-1	f5	f6	f7	f8	f9	g1	g2	g3	h1	h2	h3
25	45 - 160	90 - 320	25,5	32,5	92	166	18	40	27	67	11	13	13
38	150 - 600	300 - 1100	23	35	92	166	18	45	27	72	11	13	13
56	1000 - 2000	–	25	50	120	203	26,5	65	40	105	13	13	25

With G ¼" manometer connection at the face.

Series UHE Technical Selection Chart: Scaled Drawings

Direction of rotation viewed from Shaft
I = indirect – counterclockwise
D = direct – clockwise

The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per dimension sheet when ordering. Standard design of the pump for two pipe installation, design for one pipe installation on enquiry!

hp internal gear pumps up to 40 bar (Direction I = indirect - counterclockwise)

Pump Series UHE Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano-meter Con-nection	max. allowed Pump RPM (min^-1) at I/D	Net weight (kg) at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. I	at 9 bar	at 30 bar	at 40 bar	Article No. I
UHE-A2-PZ	200	155	140	110542	400	310	280	130542	38	12	G 1/2"	G 1/4"	2800	4,4
UHE-A3-P	300	260	240	110543	600	520	480	130543	38	12	G 1/2"	G 1/4"	2800	4,6
UHE-A4-M	450	425	390	110544	900	850	780	130544	38	12	G 1/2"	G 1/4"	2800	4,8
UHE-A5-GZ	550	500	450	110545	1100	1000	900	130545	38	12	G 1/2"	G 1/4"	2800	5,0

hp internal gear pumps up to 40 bar (Direction D = direct - clockwise)

Pump Series UHE Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano-meter Con-nection	Heating Capacity H1 in Watt at 220V, 50Hz at I/D	Initial Pump Break- away Torque at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. D	at 9 bar	at 30 bar	at 40 bar	Article No. D
UHE-A2-PZ	200	155	140	120542	400	310	280	140542	38	12	G ½"	G ¼"	110	1,6
UHE-A3-P	300	260	240	120543	600	520	480	140543	38	12	G ½"	G ¼"	110	1,6
UHE-A4-M	450	425	390	120544	900	850	780	140544	38	12	G ½"	G ¼"	110	1,6
UHE-A5-GZ	550	500	450	120545	1100	1000	900	140545	38	12	G ½"	G ¼"	110	1,6

Characteristics hp-Industrial pumps
Series UHE - AX; for fuel oil L / EL

Pipe Connections DIN ISO 228

Series	a1	a2	a3	b1	b2	c1	c2	d1	d2	d3
UHE-A2-PZ	5	36	66	85	130	36	50	12	13,5	54
UHE-A3-P	5	36	66	85	130	36	54	12	13,5	54
UHE-A4-M	5	36	66	85	130	36	58	12	13,5	54
UHE-A5-GZ	5	36	66	85	130	36	64	12	13,5	54

Series	e1	f1	f2	f3	f4	f5	f6	S;A;R	M1; M2	M3
UHE-A2-PZ	11	35	101	125	58	98	72,5	½"	G ¼"	1/8"
UHE-A3-P	11	35	101	125	58	98	72,5	½"	G ¼"	1/8"
UHE-A4-M	11	35	101	125	58	98	72,5	½"	G ¼"	1/8"
UHE-A5-GZ	11	35	101	125	58	98	72,5	½"	G ¼"	1/8"

Acessories for UHE - Series

Axial Face Seal: see accessories (Gear Rotor Size Ø 38)

hp-electric standby and companion Heaters
Series H2, for hp Industrial Pumps

All hp Industrial Pumps Series UHE-AX can be
equipped with electric heating, Series H2, at
the factory.

Recommended for use with heavyoil.

hp internal gear pumps up to 40 bar (Direction I = indirect - counterclockwise)

Pump Series UHE Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano-meter Con-nection	max. allowed Pump RPM (min^-1) at I/D	Net weight (kg) at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. I	at 9 bar	at 30 bar	at 40 bar	Article No. I
UHE-A2-PZ	200	155	140	110542	400	310	280	130542	38	12	G 1/2"	G 1/4"	2800	4,4
UHE-A3-P	300	260	240	110543	600	520	480	130543	38	12	G 1/2"	G 1/4"	2800	4,6
UHE-A4-M	450	425	390	110544	900	850	780	130544	38	12	G 1/2"	G 1/4"	2800	4,8
UHE-A5-GZ	550	500	450	110545	1100	1000	900	130545	38	12	G 1/2"	G 1/4"	2800	5,0

hp internal gear pumps up to 40 bar (Direction D = direct - clockwise)

Pump Series UHE Size:	Viscosity: 6 mm² sec^-1 at 20° C								Gear Rotor Size Ø	Shaft Ø	Threaded Connection for (S/A/R)	Mano-meter Con-nection	Heating Capacity H1 in Watt at 220V, 50Hz at I/D	Initial Pump Break- away Torque at I/D
	n = 1400 min^-1 Discharge l/h				n = 2800 min^-1 Discharge l/h
	at 9 bar	at 30 bar	at 40 bar	Article No. D	at 9 bar	at 30 bar	at 40 bar	Article No. D
UHE-A2-PZ	200	155	140	120542	400	310	280	140542	38	12	G ½"	G ¼"	110	1,6
UHE-A3-P	300	260	240	120543	600	520	480	140543	38	12	G ½"	G ¼"	110	1,6
UHE-A4-M	450	425	390	120544	900	850	780	140544	38	12	G ½"	G ¼"	110	1,6
UHE-A5-GZ	550	500	450	120545	1100	1000	900	140545	38	12	G ½"	G ¼"	110	1,6

Characteristics hp-Industrial pumps
Series UHE - AX; for fuel oil L / EL

Pipe Connections DIN ISO 228

Series	a1	a2	a3	b1	b2	c1	c2	d1	d2	d3
UHE-A2-PZ	5	36	66	85	130	36	50	12	13,5	54
UHE-A3-P	5	36	66	85	130	36	54	12	13,5	54
UHE-A4-M	5	36	66	85	130	36	58	12	13,5	54
UHE-A5-GZ	5	36	66	85	130	36	64	12	13,5	54

Series	e1	f1	f2	f3	f4	f5	f6	S;A;R	M1; M2	M3
UHE-A2-PZ	11	35	101	125	58	98	72,5	½"	G ¼"	1/8"
UHE-A3-P	11	35	101	125	58	98	72,5	½"	G ¼"	1/8"
UHE-A4-M	11	35	101	125	58	98	72,5	½"	G ¼"	1/8"
UHE-A5-GZ	11	35	101	125	58	98	72,5	½"	G ¼"	1/8"

All hp pumps are equipped with axial face seals made of Viton which can resist pressures of up to 5 bar and withstand temperatures of up to 150 °C.
The axial face seals are relieved of pressure on the suction side of the pump. See graph for maximum pressure load of the axial face seal, i.e. of the suction side in dependence with the temperature.

Product Number for Axial Face Seal

Gear Rotor Size Ø	Shaft Ø	Viton (max. 150°C) Sparepart Product No.
25	12	190015
38	12	190015
56	18	190016
75	22	190017

hp Electric Standby and Companion Heaters for Type H1 –
hp Industrial Pumps

All hp pump models can be equipped with electric heating, type H1, at the factory.

Equipped at factory: Article-No. H1	Spare Part Article-No. H1	Suitable for pumps with a motive force diameter of:	Shaft Ø	Heating Capacity [W]	Number of Heating Cartridges 230V, 50Hz, other voltages available upon request
190050	190055	25	12	100	1
190051	190056	38	12	100	1
190052	190057	56	18	160	1
190053	190058	75	22	280	1