HE 5120 CAN Display

Features

• 5-digit 7-segment display,
  display range -9999 to 99999,
  decimal point free selectable
• 3x LEDs for status / measuring range display
• CAN connection: CAN-specification according
  to 2.0A / 2.0B / ISO11898 (max. 1 MBaud),
  CANopen protocol according to DS301 and
  parts of DS 401
• DIP-switch (8-pin) for CAN node address
  and switchable CAN bus termination
• Coded rotary switch 0-9 for CAN baud rate:
  10 kBaud to 1 MBaud,
  Option: automatic baud rate recognition
• Switching output: 1 relay, potential free
  change-over contact (250 V AC / 5 A)

Brief Description

The CAN display HE 5120 is applied for the visualization of process data like temperature, pressure, weight, level, etc. The different physical units are identified by three LEDs.
The instrument has a switch contact which can either be used as a digital output or limit comparator.
The CAN bus connection is according to ISO11898. The Siemens microprocessor C505C with integrated FULL CAN controller supports the transmission according to the CAN specification 2.0A / 2.0B with max. 1 MBaud.
The instrument can be programmed per parameter setting via CAN bus which information is to be displayed and in which format . The display is thus able to filter the relevant data from the complete CAN messages by itself without being addressed directly. The parameter settings are stored in an EEPROM. This means that, after a shut down, the instrument can start the operation again without repeating the process of parametrization.

Downloads:

• HE 5120 Data Sheet
• HE 5120 Manual

Images for this product:

HE 5120 P Profibus Display with Digital IOs

Features

• 5 digits, 7 segment display,

• Display range -9999 ... 99999,

• Decimal point free selectable

• 3x LEDs free addressable

• Connection and specification acc. to PROFIBUS-DP, EN 50 170

• Node address adjustable with DIP switches

• Baud rate up to 12 MBaud

• 6 digital inputs 24 V DC

• 3 digital outputs 24 V DC

Brief Description
The display unit HE 5120P is a nummeric display with Profibus interface and serves the visualization of process data such as temperature, pressure, weight, level etc. . The different physical units are identified with the LEDs, which are freely selectable over the Profibus.
The device is additionally provided with 6 digital inputs 24V DC and 3 digital outputs 24V DC. The Profibus connection conforms with EN 50 170. The controller supports the transfer according to specification PROFIBUS DP with max. 12 MBaud. The baud rate is detected automatically.
Optionally available is an rotary pulse switch as a setpoint device for simple reference value input.
The HE 5120P faciliates the installation of on-site operation terminals.

Downloads:

• HE 5120P Data sheet
• HE 5120P Manual
• HE 5120P-GSD File

Images for this product:

HE 5900 Basic Trays for Mod I/O

Mounting on DIN-Rail

The basic trays are intended for DIN-rail mounting according to EN 50022. The mounting is carried out by locking the metal ledge (A) on the back side below. For dismantling a basic tray the metal ledge (A) must be released.

Installation / Removal of the Modules

Module installation into a basic tray: Slide in the module at the respective place. Listen to the 'click' for proper engaging.
The installation of the modules HE 5910 or HE 5911 (fieldbus coupler) always must be placed at the absoluy left position. All other modules can be installed at any position.
For removing: Release the two ledges (B) and pull out the module.
To keep the specified protection degree (IP20) emty slots must be protected by slot covers.

Screw-/ Plug-in-Terminals

The screw-/plug-in-terminals can be plugged in from above or below into the module housing (audible locking). Removing the screw-/plug-in-terminals takes place by levering out at position (C), e.g. with a screwdriver.

Due to protection against contact, not connected terminal blocks should remain in their places.

Images for this product:

HE 5894 HMI and Programable Logic Control Unit

Features

• Compact and rugged hardware
• Operation with touch screen
• Brilliant colour display,  7" or 10" with 262144 colours
• Operating system  'embedded' LINUX
• Real time soft PLC with  CoDeSys V.3.3
• Convenient debug and commissioning tools
• Integrated grafical visualisation system
• Function keys for general system functions
• Data exchange  between visualisation and PLC
• Control of an extenal IMOD System
• Four independent serial interfaces
  RS-232, 2x RS-485 and CAN
• LEDs for system status
• Fanless design due to 'low power' components

• Solid state memory

Brief Description

The touch panel programmable logic controller (PLC) HESCH HE 5894 is a device of the human-machine interface class with integrated PLC functions.
The HE 5894  is intended for creation of automated process control systems in various industries, power generation, the building automation sector and transportation.
The integration of the control program and the user interface in one common device and one programming environment  results in significant time and cost advantages. By standardising the description of the data in the control program and in the visualization, errors are avoided.  Adjustable task priorities enable fast cycle times of the soft-PLC as well as short response times of the user interface.
An integration of the control terminals into existing networks is possible via the Ethernet interface.  The computer is fanless, thanks to the use of 'low power' components and solid state memory for program and data.
The operation is done directly on the screen surface, general system functions and special functions of the program can be started with the additional control buttons with LED indication.

Downloads:

• HE 5894 Data Sheet

Images for this product:

HE 200 HL Differential Pressure Transducer

Features

• Measuring ranges: Differential pressure
  0 - 2.5 mbar to 0 - 1000 mbar
• Linearity error ≤2%
• Output signals:
  0 - 10 V or 0(4) - 20 mA
• Supply voltage:
  - 24 V DC HE 200
  - 230 V AC HE 200 N
• Rugged plastic housing IP 65

Options

• Bipolar differential pressure measurement
• Linearity error ≤1%
• Limit value - switch contacts
• Power supply 24V / 115V / 230V 50-60 Hz
• Version with square-rooted output signal
  (Measurement of volume flow)

Brief Description

The pressure transducers HE200 of HESCH are used to measure smallest amounts of overpressure, underpressure or differential pressure. The active measuring element is a solid stat sensor, which is adapted to the required measuring range. An integrated amplifier represents the pressure value as a linear output signal of e.g. 0 - 10 V or 0(4) - 20 mA. Hesch pressure transducer keep their reliability for years in the rough industrial environment.

Application

• Monitoring of dedusting filters
• Ventilation - and air condition equipment
• Medical devices
• Chemical engineering
• Automation
• Food - industry
• Mechanical engineering
• Environmental applications

 過濾控制器

HE 5711 Valve Control Unit
HE 5721 Valve Control Unit
HE 8991 Valve Control Unit
HE 9059 Valve Control Unit (deprecated)

HE 5711 Valve Control Unit Features Excitation of max. 8 valves Valve type 24 V DC (1 A) 2 modes: permanent- or full cycle cleaning Operational display for all valves (LEDs) Mains supply 230 / 115 V AC, 24 V DC Transformer adaptable for different types of valves 3 device versions Description The valve control unit HE 5711 with micro- processor is used for pulse activation of solenoid valves in industrial air pollution control systems. Build in functions:  - Valve number, adjustment of number of valves 1 - 8 with rotary code switch  - Permanent cleaning, adjustment of pulse-  and pause time per potentiometer  - Cycle cleaning, adjustment of full cycles 1 - 10 with rotary code switch  - Start push-button, the adjusted cleaning cycles are excecuted  - Test push-button, the next valve will be activated.  Flexible assembly as:      - Circuit board for cabinet installation with screws  - DIN-rail carrier version  - Plastic housing with EX ATEX approbation The transformer can be adapted to the actually needed valve power consumption. Downloads: HE 5711 Data Sheet HE 5711 Manual

Images for this product: HE 5711 DIN rail montage HE 5711 with pilot valves HE 5711 with Housing

Compact filtration controllers

HE 5720 Valve Control Unit with DeltaP Controller
HE 5721 Valve Control Unit with Front Panel
HE 5731 Solenoid Valve Controller

Dedusting controllers

HE 1149 Pressure Transmitter

Downloads:

• HE 1149 Data Sheet

Images for this product:

HE 3410 Shear Beam Load Cell

Downloads:

• HE 3410 Data Sheet

Images for this product:

HE 094 Multi Channel Digital Display

Features

• Inputs:
  - 0 - (5)10 V
  - 0(4) - 20 mA,
  - Strain age full bridge
  - RTD (Pt100 type, 3-wire)
• Menu guided programming
  with 4 touch buttons
• Transducer supplies
  - 16 V /   40 mA for 2-/3-wire transmitter
  - 10 V / 100 mA for 2-/3-wire transmitter
  - ± 5 V /  40 mA for strain gage transducer
• 2 x 4-digit digital display
• 2 limit values min./max. with on/
  off-delay, fail-safe and hold function
• Peak value memory (digital)
• Code protection against unauthorized access

Brief Description
The measuring instrument HE 094 is a versatile digital display in a standardized DIN housing for front panel installation. Two separate inputs e.g. pressure and temperature can be measured and represented  at the same time. With the four digits membrane keyboard all parameters can be programmed by front-lateral operation by the user. 
Two adjustable limit values for each channel with programmable switch-in and switch-off delay, hysteresis and hold function are available.

Downloads:

• HE 094 Data Sheet

Images for this product:

HE 001 Temperature Controller

Features

• Input:
  - RTD (Pt 100-type) (2-wire)
  - TC Thermocouples (built-in
     cold junction compensation)
• 2-position-controller with PD-function
• 1 action output
  - 1 relay change-over contact or
  - 1 bistable voltage output 0 / 10 V
      (indication with LED)
• Compact panel installation housing,
   96 x 96 x 46 mm (h x w x d)

Brief Description

The electronic temperature-controller HE 001 is a 2-position-controller with switching output.
The controller is suited for resistance thermometer and thermocouples. The version 'Thermocouples' is equipped with a cold junction compensation.
The amplifiers gain is adjustable with a potentiometer at the rear side. This enables an easy adaption of the controller to the controlled system.
Sensor breakage or interruption of sensor lines and over temperature are responded of the controller with disconnection of the heating.
The set-point is adjustable with a potentiometer with calibrated scale, equipped with locking clamp.

Downloads:

• HE 001 Data Sheet

Related products:

• HE 002 Temperature Controller

Images for this product: