德國HAINBUCH GMBH夾具

德國Sensortechnics GmbH傳感器

德國HAEHNE Elektronische Messgeräte GmbH 稱重傳感器

德國ILMVAC GMBH真空泵

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

產品系列：

 Scroll pumps

 Rotary Vane Pumps

 Diaphragm Pumps

 Turbomolecular Pumps

 Oil Diffusion Pumps

For the production of a vacuum from the rough- into the high vacuum range different pumping principles are used. So e.g. for the - rough vacuum range = diaphragm pumps, - rough- and fine vacuum range = scroll and rotary vane pumps, - high and ultra high vacuum range = turbomolecular- and oil diffuion pumps (in combination with diaphragm-, scroll- and rotary vane pumps as fore-pumps)

 Laboratory Vacuum Systems LVS standard

 Laboratory Vacuum Systems LVS economic (en)

 Laboratory Vacuum Systems LVS ecoflex (ef)

 Cascade Diaphragm Pump Systems univac

ILMVAC GmbH strives not only to develop professional vacuum engineering solutions for standard applications. In addition we are greatly expirenced in the execution of purpose built turnkey projects. We are pleased to offer our konwledge and experience and to work with our customers to deliver innovative and economical solutions for industry and research. Whether you require leading edge replacements for existing equipment or practical solutions for new processes, we are part of your team. To illustrate our breadth of system build experience: - leak testing systems - vacuum plasma systems - special pump systems

 Combination Pump Systems chemvac Roots Pump Systems Turbomolecular Pump Systems Oil Diffusion Pump Systems Special Pump Systems / Plants

 biovac

 fluivac

 biocont

ILMVAC aspiration systems provide for the safe transfer of liquid in all sectors of industry and in the laboratory. The use of different pipet tips allows for safe and efficient removal of numerous fluids. The optional "filter head" expansion sets enable these units to be used for filtration tasks.

 biovac

 fluivac

 biocont

ILMVAC aspiration systems provide for the safe transfer of liquid in all sectors of industry and in the laboratory. The use of different pipet tips allows for safe and efficient removal of numerous fluids. The optional "filter head" expansion sets enable these units to be used for filtration tasks.

 biovac fluivac biocont

ILMVAC aspiration systems provide for the safe transfer of liquid in all sectors of industry and in the laboratory. The use of different pipet tips allows for safe and efficient removal of numerous fluids. The optional "filter head" expansion sets enable these units to be used for filtration tasks.

The anaerobic gassing system "anavac 104" consists of a control device as a unit together with a diaphragm pump, a reaction gas container, and flushing gas system. The required vacuum, gassing pressure and the number of gassing cycles have a fixed set-ting. Over the interface RS 232 these can be changed easily by means of a PC or laptop as required. A detailed description is to be found in the manual. Via the start button the fully automatic process is released. The ventilation with the reaction gas follows the evacuation of the attached anaerobic container up to the adjusted pressure. The preset number of cycles is repeated automatically. With rapid-action couplings the system can be attached to and separated from the reaction gas container. The anavac 104 is supplied compley installed. The aeration gas and the pressure-reducing valve are not included in the scope of delivery.

The following components are chemically resistant. The valve housings are made of polypropylene. We produce "netvac" adapters and connectors for built-in components in furniture, media channels and columns on request. Legend: M = vacuum connections point manual E = vacuum connections point automatic R = rear panel connections + = with Kalrez - check valve

 Rough Vacuum Gauges 1000 - < 1 mbar Fine Vacuum Gauges 1 - 10^-3 mbar Multi-Range and High Vacuum Gauges Vacuum Controllers 1100 to 1 mbar

The total range of scientifically useful vacuum extends from approx. 1000 mbar (atmospheric pressure) down to 10^-12 mbar, the ultra high vacuum range. The instruments for measuring the pressure are vacuum gauges. No one physical measuring technique covers the whole vacuum/pressure range. Particular sensors and gauges must be used for parts of the whole range, rough, fine, high and ultra high vacuum. These systems are also offered in combination as multi-range vacuum gauges for covering multiple measuring ranges. Rough vacuum gauges Measuring range: atmospheric to 1 mbar Besides the traditional vacuum gauges with mechanical sensors (e.g. Bourdon, capsule gauge) diaphragm manometers with electronical diaphragm sensors are well established (Piezo and capacitance gauges). The pressure to be measured is separated by a diaphragm from a reference vacuum and compared to the latter. The movement of the diaphragm is registered either by a piezo resistive system or the diaphragm is part of a capacitor (capacitance vacuum system). For improved chemical resistance the diaphragm is often made of aluminium oxide ceramic. The pressure measurement is independent of the type of gas.

 for Scoll Pumps for Rotary Vane Pumps and chemvac for Diapragm Pumps and -Pump Systems for Distillation, Aspiration, Filtration, Anaerobic for Turbomolecular Pumps and -Pump Systems for Measuring Gauges, Controller and Leak Detector Mains Connection Cables Oils for Vacuum Pumps

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

Radial Force Sensors as Flange Design

Web Tension Sensors as Flange Design - for tension rolls supported by two bearings - made of aluminium, stainless steel, or steel - analog or fieldbus amplifiers / interface BZA made of aluminum   Nominal force Fnom (Measuring range): 100 to 1600 N   Shaft diameter: 15 to 60 mm   BZN Made of stainless steel   Nominal force Fnom (Measuring range): 160 N to 4 kN   Shaft diameter: 15 to 40 mm   XYR Dual Axis Web Tension Sensor   Nominal force Fnom (Measuring range): 500; 1000 and 2000 N   Shaft diameter: 15 mm   LBZR Bearing support block for BZA / BZE   EBZ made of aluminium   Nominal force Fnom (Measuring range): 100 to 1000 N   Shaft diameter: 17 mm   MDL Measuring Pillow Block Bearing   Nominal force Fnom (Measuring range): 5000 N

Pillow Block Load Cells

Pillow Block Load Cells  - for tension rolls supported by two bearings - analog or fieldbus amplifiers / interface BZH Measuring direction horizontal, up to 6300 N   Nominal force Fnom (Measuring range): 160 to 6300 N   BZHB Measuring direction horizontal, up to 6300 N   Nominal force Fnom (Measuring range): 160 to 6300 N   Size: 1 and 2   BZH-A Maesuring direction horizontal, aluminium, up to 0.5 kN   Nominal force Fnom (Measuring range): 0.1; 0.2; 0.5   BZH-K00 Measuring direction horizontal, up to 5 kN   Nominal force Fnom (Measuring range): 1; 2; 5 kN   Size: 00   BZH-K01; 02 Measuring direction horizontal, up to 100 kN   Nominal force Fnom (Measuring range): 10 to 100 kN   Size: 01 and 02   BZH-K03 Measuring direction horizontal, 200 kN   Nominal force Fnom (Measuring range): 200 kN   Size: 03   BZV-A Measuring direction vertical, aluminium, up to 0.5 kN   Nominal force Fnom (Measuring range): 0.1; 0.2; 0.5   BZV-K01; 02 Measuring direction vertical, to 100 kN   Nominal force Fnom (Measuring range): 5 to 100 kN   Size: 01 and 02   BZV-K03 Measuring direction, 200 kN   Nominal force Fnom (Measuring range): 200 kN   Size: 03

Narrow Web Radial Force Sensors

Narrow web radial force sensors for mounting to single-sided machine frames ZAK Tension force sensor for narrow webs or integrated into complete measurement rolls   Nominal force Fnom (Measuring range): 10 to 2000 N   KAT Small tension force sensor for narrow webs   Nominal force Fnom (Measuring range): 25 up to 630 N

Web Tension Idler Rolls

Complete web tension idler rolls for - single-sided machine frames or rolls supported by two bearings - external or integrated strain gauge amplifiers - analog or bus amplifiers / interface MEZ Measuring roll, mounted sensors on both sides   Nominal force Fnom (Measuring range): 20 to 4000 N   Roll diameter: upward from 40 mm   MWF Measuring roll   Nominal force Fnom (Measuring range): 50 to 2000 N   Roll diameter: 80 mm   MES Measuring roll, integrated sensors on both sides   Nominal force Fnom (Measuring range): 100 to 800 N   Roll diameter: 100; 120; 160 mm

Bolt Design - Actuator - Linear Actuator - Clevis

The bolt design (KMB) has been widely accepted by design engineers because it can measure tension and compression forces in standardized fork heads. This is especially the case in connection with hydraulic and pneumatic cylinders. KMB for Fork Heads

Load Cell, Compression Force Sensor

The cylindrical compact design principle is the basis for this compact compression sensor. They were designed for applications in confined spaces – diameter and height. The FEA optimized "one-piece" design results in high measuring precision. DK2 Compression Force Load Cell   Nominal force Fnom (Measuring range): 0.5 to 10 kN   DK3 Compression Force Load Cell   Nominal force Fnom (Measuring range): 1 to 50 kN   DK4 Compression Force Load Cell   Nominal force Fnom (Measuring range): 200; 500; 650; 1000 kN

Ring Force Sensors

These low profile ring force sensors can be used in confined spaces to measures tension and compression forces. These sensors where developed as a general FEA optimized design and is customized for specific application for forces ranging from 500 N up to 10 MN. CTS01 Compression - Tension - Sensor   Nominal force Fnom (Measuring range): 20 kN   CTS02 Compression - Tension - Sensor   Nominal force Fnom (Measuring range): 300 kN   RKS01 Force Sensor   Nominal force Fnom (Measuring range): 5 to 100 kN   RKS02 Force Sensor   Nominal force Fnom (Measuring range): 1; 2; 5 and 10 MN

Portable Force Measurement, Nip Force Measurement

The PAD can be connected to all force sensors of the HAEHNE product program and other full bridge strain gauge sensors to form a force measurement system. The system is being used in roll pressure applications, service and process improvements, calibration of web tension control systems. FCS Portable Force Measurement Instrument   PAD Portable Strain Gauge Amplifier

Fieldbus Strain Gauge Amplifiers

These products are available in two enclosure types, respectively mounting versions: - in cabinet mounting versions for DIN rails or - as field enclosure for mounting close to the sensor location.  A whole series of analog amplifiers – also with multiple channels – is available as well as fieldbus technology amplifiers according to the Interbus-S, Profibus DP, CANopen and DeviceNet standards. Busbox-P2 Profibus Amplifier   Design: Aluminium Field Enclosure, IP 67   Busbox-PS2 Profibus Amplifier   Design: DIN Rail Mount Enclosure, IP 20   Busbox-PEZ Profibus Amplifier   Design: Stainless steel enclosure   Busbox-I InterBus-S Strain Gauge Amplifier   Design: Aluminium Field Enclosure, IP 67   Busbox-C CANopen Strain Gauge Amplifier   Design: Aluminium Field Enclosure, IP 67   Busbox-D DeviceNet Strain Gauge Amplifier   Design: Aluminium Field Enclosure, IP 67

Strain Gauge Analog Amplifier with infiniy adjustable Voltage Output

This product group comprises an extremely narrow body Strain gauge amplifier with infiniy adjustable filtered voltage output as well as an easy to operate strain gauge amplifier with digital adjustments - both for DIN-rail mounting. A supplemental module with limit switches, adder and filter functions enables the design of simple two point controls. A sophisticated Amplifier PID Controller Combination is available for demanding applications. The use of additional input values (e.g. such as web velocity) results in highly dynamic closed loop controls. Digital adjustment elements reduce the external wiring requirements to a minimum. AME2 Strain Gauge Amplifier   Design: DIN Rail Mount Enclosure   DMA2 Measuring Amplifier with digital adjustment and display   Design: DIN Rail Mount Enclosure   MV125 Measuring Amplifier   Design: Aluminium Field Enclosure   MV127 Measuring Amplifier with Limit Switch   Design: Aluminium Field Enclosure   MV128 Measuring Amplifier with Analog Display   Design: Aluminium Field Enclosure   CA Cable Amplifier

壓力傳感器和壓力變送器

Basic Pressure Sensors   25 mbar to 16 bar, 10 inch H2O to 250 psi Absolute, (vacuum) gage, differential Output: mV For air and non-corrosive gases or lightly corrosive liquids and gases   MORE ....
Compensated and Calibrated Pressure Sensors   5 mbar to 16 bar, 4 inch H2O to 250 psi Absolute, (vacuum) gage, differential Output: mV For air and non-corrosive gases or lightly corrosive liquids and gases   MORE ....
Amplified Pressure Sensors   2.5 mbar to 5 bar, 1 inch H2O to 500 psi Absolute, gage, differential Output: 0.25...4.25 V, 0.5...4.5 V, 0...5 V, 1...6 V, I²C, SPI For air and non-corrosive gases or lightly corrosive liquids and gases   MORE ....
Barometric Pressure Sensors   600...1100, 800...1100 mbar, 12...16 psi Absolute Output: 0.25...4.25 V, 0.5...4.5 V, 0...5 V, I²C, SPI For air and non-corrosive gases   MORE ....
Pressure Sensors for Lightly Corrosive Liquids and Gases   35 mbar to 16 bar, 0.5 to 500 psi Absolute, (vacuum) gage, differential Output: mV, 0.5...4.5 V Enhanced media compatibility   MORE ....
Stainless Steel Pressure Sensors   200 mbar to 35 bar, 3 to 500 psi Absolute, (vacuum) gage Output: mV, 0.5...4.5 V, I²C bus For media compatible with stainless steel   MORE ....
Low Pressure Transmitters   1 mbar to 10 bar, 1 inch H2O to 150 psi Absolute, (vacuum) gage, differential Output: 0.5...4.5 V, 0...5 V, 0...10 V, 1...6 V, 4...20 mA For air and non-corrosive gases   MORE ....
Pressure Transmitters for Corrosive Liquids and Gases   200 mbar to 400 bar, 3 to 6.000 psi Absolute, (vacuum) gage Output: 4...20 mA, 0...20 mA, 0...5 V, 0...10 V, 0.5...4.5 V, 1...6 V For corrosive and aggressive media   MORE .... 液位傳感器 液位開關   Hydrostatic Liquid Level Sensors   0...100 mbar to 0...10 bar, 0...1.5 to 0...150 psi 0...1 to 0...100 mH2O, 0...3.5 to 0...350 ft H2O Absolute, gage Output: 4...20 mA, 0...20 mA, 0...10 V, 1...6 V For level measurement For corrosive and aggressive media   MORE ....   Capacitive Level Sensors   Continuous or point level measurement Contact-free and sterile use Measurement of liquids and bulk materials Electrode to compensate for environmental conditions Miniature size   MORE ....   Optical Liquid Level Switches   Single point liquid level detection No moving parts High media compatibility Miniature size Fast response Digital or transistor output   MORE ....   流量傳感器   Mass Flow Sensors for Gases   From 0...±25 sscm to 0...200 slpm or from 0...0.5 to 0...±4 inch H2O Output: mA, mV, V For air and dry gases   MORE ....   Sensors for Volumetric Flow Measurement   Ultra low differential pressures from ±1 mbar Wet-wet differential pressure measurement Square rooted output signals   MORE ....

產品系列：

回轉零件外徑夾持

司班托夾頭系統

夾固頭

換模裝置-卸爪器

諾瓦 通孔型夾頭

諾瓦 止動型夾頭

諾瓦 軸向零移位

托普勒司 通孔型

托普勒司 止動型

三爪快換夾頭

自動偏心式夾頭

心軸夾頭

托洛克手動夾頭

四瓣夾頭

多角銑切復合夾頭

熱切削夾頭

比托普三爪夾頭

比托普三合一夾頭

夾爪

巨型夾頭

泰勒蒙變形夾固頭

特殊夾頭應用

回轉零件內徑夾持

反張夾頭本體

曼多T211反張模塊化夾頭

曼多T212反張模塊化夾頭

反張夾固環

曼德斯脹套

曼德斯反張夾頭

反張夾頭 212/213

反張夾頭 611/811

反張模塊化夾頭

多主軸

夾具王

多主軸用夾具王

靜置型外徑夾持

曼諾克手動靜置型夾頭

曼諾克普勒司夾頭

靜置型夾頭

桑多克卡鉗

海洛克夾頭

二爪求心手動夾頭

油壓缸套件

靜置型內徑夾持

靜置型反張夾頭

桑德瑞斯定位套件

桑德瑞斯基板系統