德國Bopp & Reuther Messtechnik GmbH安全閥與調節閥門

瑞典Datek AB發射器 接收器

德國Systeme Helmholz GmbH通訊組件 元件

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

產品系列：

Memory

德國MOBIL ELEKTRONIK GmbH傳感器 發生器 安全電子產品 控制器 液壓裝置

產品系列：

Product lines of standardized devices are the basic framework for customized, application-specific components. Thus, maximum flexibility along with highest standardization and cost efficiency can be met.

 

Safety electronics		Software and diagnostics		Operation terminals
Safety angle transducers		Setpoint generators/ Steering force simulators		Control device
Hydraulic devices		Installation concepts

Micro Memory Cards

The Micro Memory Cards from the Systeme Helmholz GmbH are suitable for use in S7 controllers...

• details

Memory Cards

Memory cards from the Systeme Helmholz GmbH, suitable for the S7, are designed for use in CPU modules CPU 412 to CPU 417...

• details

Memory

Micro Memory Cards

The Micro Memory Cards from the Systeme Helmholz GmbH are suitable for use in S7 controllers...

• details

Memory Cards

Memory cards from the Systeme Helmholz GmbH, suitable for the S7, are designed for use in CPU modules CPU 412 to CPU 417...

• details

Input/Output Modules

DEA 300, Digital Input Modules

The digital inputs convert the external binary signals from the process into the internal signal level of the programmable controller...

• details

DEA 300, Digital Input Module, m-reading

The digital inputs convert the external binary signals from the process into the internal signal level of the programmable controller...

• details

DEA 300, Digital Input Module, with Alerts

The digital inputs convert the external binary signals from the process into the internal signal level of the programmable controller...

• details

DEA 300, Digital Output Modules

The digital outputs convert the internal signal level to the external signal level required for the process...

• details

DEA 300, Digital Input/Output Modules

The digital inputs convert the external binary signals from the process into the internal signal level of the programmable controller...

• details

DEA 300, Digital Output Module, 2 Amps

The digital outputs convert the internal signal level to the external signal level required for the process...

• details

DEA 300, Digital Output Convert; Relais, 5 Amps

The digital outputs convert the internal signal level into the external signal levels required for the process...

• details

DEA 300, Digital Output Convert; Relais, 2 Amps

The digital outputs convert the internal signal level into the external signal levels required for the process...

• details

DEA 300, Digital Input Modules; 120/230 V

The digital inputs convert the external binary signals from the process into the internal signal level of the programmable controller...

• details

AEA 300, Analog Input Module for connecting sensors with current signals

The analog input modules from the Systeme Helmholz GmbH convert the analog signals from the process to the internal signal level of the programmable controllers...

• details

AEA 300, Analog Input Module for connecting sensors with voltage signals

The analog input modules from the Systeme Helmholz GmbH convert the analog signals from the process to the internal signal level of the programmable controllers...

• details

AEA 300, Analog Input Module for connecting Resistance Thermometers

The analog input modules from the Systeme Helmholz GmbH convert the analog signals from the process to the internal signal level of the programmable controllers...

• details

AEA 300, Analog Input Module - current signals, voltage signals, resistance, resistance thermometer

The analog input modules from the Systeme Helmholz GmbH convert the analog signals from the process to the internal signal level of the programmable controllers...

• details

AEA 300, Analog Output Module; 4-Channel

The analog output modules from the Systeme Helmholz GmbH convert the internal signal level of the programmable controllers to the analog signal level required for the process...

• details

AEA 300, Analog Output Module; 2-Channel

The analog output modules from the Systeme Helmholz GmbH convert the internal signal level of the programmable controllers to the analog signal level required for the process...

• details

Dummymodules

The dummymodule from the Systeme Helmholz GmbH is for reserving slots for unparameterized signal modules...

• details

PAS 153, distributed PROFIBUS Interface

The PAS 153 distributed PROFIBUS Interface from Systeme Helmholz GmbH is for linking digital and analog input and output modules to the PROFIBUS DP...

• details

Communication Modules

SAS 340, Communication Module

The serial communication module SAS 340 permits the linking to the PLC of serial devices, such as barcode scanners, operator terminals, serial printers, PCs...

• details

SAS 341, Communication Module

The serial communication module SAS 341 permits the linking to the PLC of serial devices, such as barcode scanners, operator terminals, serial printers, PCs...

• details

EIB 300, Communication Module for Twisted Pair EIB/KNX

The EIB 300 enables the connection of an EIB/KNX bus to the PLC whereby the bus is directly attached to the module...

• details

Accessory/Front Connector

FastPlug, Frontadapter for S7 modules

The new professional FastPlug Frontadapter from the Systeme Helmholz GmbH are intended for insertion or clipping on a 16 or 32 Bit S7 Input/Output module...

• details

Front Connectors

The Systeme Helmholz GmbH offers a wide range of 20- and 40-way front connectors with different connection types...

• details

Ready wired Front Connectors

The Ready-wired front connectors* are available for easy connection of sensors and actuators to input/output modules of Systeme Helmholz GmbH...

• details

Mounting rail

For all DEA and AEA etc...

• details

Mounting rail adapter for DIN rail

We offer for all communication modules (e...

• details

PROFIBUS Connectors

PROFIBUS Connector, 90°

With their compact design, the PROFIBUS connectors of Systeme Helmholz GmbH are ideal for connecting PROFIBUS stations...

• details

PROFIBUS Connector, 35°

The 35° PROFIBUS connector for PROFIBUS is a further component in our range of connectors providing you with low-cost, compatible alternatives for your automation...

• details

PROFIBUS Connector, axial cable outlet

The axial PROFIBUS connector for PROFIBUS is a further component in our range of connectors providing you with low-cost alternatives for your automation...

• details

PROFIBUS Connector, 90° EasyConnect®

The EasyConnect® connectors feature quick-connect technology, making the stripping of bus conductors superfluous...

• details

PROFIBUS Connector, axial EasyConnect®

The EasyConnect® connector axial features quick-connect technology, which makes stripping the bus wires superfluous...

• details

PROFIBUS Connector, 90° with diagnostic LEDs, EasyConnect®

The EasyConnect® diagnostic PROFIBUS connector allows you to build a PROFIBUS network in which the user can always check the state of the bus system at a glance...

• details

PROFIBUS Connector, 90° with diagnostic LEDs

The PROFIBUS diagnostic connector can be used to connect a PROFIBUS network in which the user can check the status of the bus system at any time at a glance...

• details

PROFIBUS Connector with ATEX accreditation

The PROFIBUS connectors are used to connect a PROFIBUS station to the PROFIBUS cable...

• details

PROFIBUS Connector with spring type terminals

The PROFIBUS connectors are used to connect a PROFIBUS station to the PROFIBUS cable...

• details

Stripping Tool for PROFIBUS cable

For quick and easy connection of PROFIBUS connectors to PROFIBUS bus lines...

• details

PROFIBUS Repeater

FLEXtra® twinRepeater, PROFIBUS Repeater

Despite its compact size, the new FLEXtra® twinRepeater from Systeme Helmholz GmbH is a fully functioning PROFIBUS repeater...

• details

FLEXtra® multiRepeater 4-way, 6-way PROFIBUS Repeater

The new FLEXtra® multiRepeater from Systeme Helmholz GmbH is a multiple PROFIBUS Repeater...

• details

PROFIBUS Compact Repeater

The new PROFIBUS Compact Repeater from Systeme Helmholz GmbH is a fully functional PROFIBUS Repeater...

• details

PROFIBUS Radio System

viBlu, PROFIBUS Radio system

The PROFIBUS radio system viBlu is a virtual cable that permits the linking of distributed I/Os or inligent devices...

• details

Antennas for NETLink® WLAN and viBlu

To optimize the reception power of the NETLink® WLAN and the PROFIBUS radio system viBlu, Systeme Helm­holz GmbH can provide a selection of different antennas...

• details

PROFIBUS Communication

PAS 153, distributed PROFIBUS Interface

The PAS 153 distributed PROFIBUS Interface from Systeme Helmholz GmbH is for linking digital and analog input and output modules to the PROFIBUS DP...

• details

DP/DP coupler

The DP/DP coupler interlinks two PROFIBUS-DP networks and permits data transmission between the masters and the two DP networks...

• details

PROFIBUS Accessory

FLEXtra® profiPoint, active termination and measuring point

The new FLEXtra® profiPoint from Systeme Helmholz GmbH is primarily used for supplying power to the terminating resistor and is designed for mounting on a DIN rail...

• details

Active PROFIBUS dropcable

The active PROFIBUS dropcable from the Systeme Helmholz GmbH is used for a failure-free connection of a programming device to an existing PROFIBUS net...

• details

Ethernet

NETLink® PRO Compact, PROFIBUS Ethernet Gateway

NETLink® PRO Compact offers flexibility, compact design and even more features than its predecessor...

• details

NETLink® PRO, Ethernet Gateway for MPI/PROFIBUS

The NETLink® PRO for programming, configuring and visualization with direct acces to the interface of a CPU. The connecting cable is an active cable...

• details

NETLink® Switch, Ethernet Gateway with integrated 4-port Switch

The NETLink® Switch is an Ethernet Gateway with an integrated 4-port switch for programming, configuring, visualizing, and remote servicing of...

• details

WLAN

NETLink® WLAN, PROFIBUS Ethernet WLAN Gateway

The NETLink® WLAN is an Ethernet/WLAN Gateway for programming, configuring, and visualizing...

• details

Antennas for NETLink® WLAN and viBlu

To optimize the reception power of the NETLink® WLAN and the PROFIBUS radio system viBlu, Systeme Helm­holz GmbH can provide a selection of different antennas...

• details

USB

NETLink® USB Compact, mini PROFIBUS USB Gateway

NETLink® USB Compact offers flexibility and compact design with the advantages of plug and play via USB...

• details

NETLink® USB, Highspeed USB Gateway for MPI/PROFIBUS

The NETLink® USB for programming, projecting and visualization may be connected to any MPI/PROFIBUS interface of the bus system...

• details

NETLink® SLOT USB, Highspeed USB Gateway as a plug-in board

The NETLink® SLOT USB is an alternative to a PROFIBUS-CP plug-in board and is directly installed in the computer...

• details

USB

NETLink® USB Compact, mini PROFIBUS USB Gateway

NETLink® USB Compact offers flexibility and compact design with the advantages of plug and play via USB...

• details

NETLink® USB, Highspeed USB Gateway for MPI/PROFIBUS

The NETLink® USB for programming, projecting and visualization may be connected to any MPI/PROFIBUS interface of the bus system...

• details

NETLink® SLOT USB, Highspeed USB Gateway as a plug-in board

The NETLink® SLOT USB is an alternative to a PROFIBUS-CP plug-in board and is directly installed in the computer...

• details

OPC

OPC Server

The S7/S5 OPC server allows you fast and easy access to process data in...

• details

Router

REX 300, Ethernet Router

The REX 300 provides you with maximum flexibility and greatest possible security. With the router, you can remoy establish simple and secure communication with...

• details

SSW7/TS300

SSW7-TS, MPI-Adapter

The SSW7-TS can be used to eservice your system via a modem connection...

• details

SSW7-TS with Modem analog/ISDN/GSM

The SSW7-TS with an integrated modem is a low-cost alternative to eservice a programmable controller via the
MPI bus...

• details

SSW7-TS PRO analog/ISDN/GSM

The SSW7-TS PRO can be used for eservicing a S7 system via a modem connection and supports to the connection of the system to an MPI or PROFIBUS network with up to 12 Mbps...

• details

TS 300, eservice module for the PLC Rack

With the TS 300, eservice of a system can be performed via the MPI bus...

• details

Modem

MDM 300, Modem for the S7 Rack

The MDM 300 of Systeme Helmholz GmbH is a universal modem. A 56 k modem is integrated into the housing of the MDM 300 that is prepared for use worldwide...

• details

SSW7-TS with Modem analog/ISDN/GSM

The SSW7-TS with an integrated modem is a low-cost alternative to eservice a programmable controller via the
MPI bus...

• details

SSW7-TS PRO analog/ISDN/GSM

The SSW7-TS PRO can be used for eservicing a S7 system via a modem connection and supports to the connection of the system to an MPI or PROFIBUS network with up to 12 Mbps...

• details

Accessory

Antennas for GSM Modems

To ensure the function of the GSM radio system in a - in most cases special - industrial environment, it is important to select a Systeme Helmholz GSM antenna an advance for the greatest possible reliability...

產品系列：

The Datek D2001K (L/M/PLC) receiver series is designed to safely control industrial and applications. The receiver is suitable for industrial overhead cranes, hoists and winches and also to control plants such as concrete mixers and tippers.

Download product sheet (PDF) 

The Datek D6003 receiver is designed to control hydraulic applications safely. This receiver is suitable for various proportional applications such as truck cranes, drilling rigs, piling machines, concrete chutes/pumps etc. Receiver outgoing signals are adjustable to accommodate current and/or voltage controlled hydraulic valves of various manufactures models.

Download product sheet (PDF) 

The Datek D2001/D2801 receiver is designed to control construction cranes, overhead cranes, deck winches on ships and similar application areas requiring two or more speed levels. The receiver is customised for respective applications in regard to relays, time relays, pre-settings and non-linear functions. The 11-pin base mounted industrial relays can accommodate heavy loads, 10A/250VAC. This allows the receiver to be directly connected to all kinds of units without intermediate adjustments and as well to older cranes with large contactors and high power consumption.

Download product sheet (PDF) 

D6003B is a fieldbus receiver for industrial applications in communications between industrial computers, transmitters, sensors and instruments. The receiver comes in two basic models – CAN-bus and Profibus.

Download product sheet (PDF) 

The D2012 is a compact and user friendly hand held transmitter. The design, incorporating large square keys, provides good manoeuvrability and allows compactness with clear key markings. Each key has its own LED (Light Emitting Diode), indicating active functions and operating status. Flexible software means that the transmitter is suitable for both simple applications and for controlling cranes with up to four motors at four different speed levels.

Download product sheet (PDF) 

This flexible transmitter handles everything from standard applications to advanced specialised equipment. The transmitter control panel is customised to fit applications and requirements and fitted with appropriate levers and switches. Two-way communications with feed-back to the user is facilitated via the graphic display and LEDs. The D2801-MIDI transmitter allows simultaneous operation of up to three cranes or relay operation between up to three crane drivers.

Download product sheet (PDF) 
See presentation (Flash) 

The Extended version is suitable when the smaller D2801-MIDI transmitter range is insufficient. Up to eight proportional and 52 digital functions can be controlled simultaneously. Large panel for controls, display, symbols and text. A powerful battery provides long periods of operation between charging.

Download product sheet (PDF) 

The fixed cabin controllers are to be mounted in the arm rests of the chair in the machine ´s control cabin. It can be used stand-alone or together with a portable radio transmitter, in order to give the operator freedom of choice from where to control the application. The front panel of the controller can be adapted according to the application and user preferences. A single cable or wireless radio makes the installation easy.

Download product sheet (PDF) 

The wall-mounted transmitter D2012P is designed for sending information from sensors and PLCs. The comprehensive safety features of the system allows for it to be used as a wireless machine stop. The rugged signal inputs are suitable for different voltages, making it ideal for industrial applications.

Download product sheet (PDF) 

Product Types