德國JW FROEHLICH Maschinenfabrik GmbH泄漏檢測儀

德國ROLAND ELECTRONIC GmbH 金屬檢測儀

德國Erhardt+Leimer GmbH打印圖像檢測系統

產品系列：

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

Print image inspection systems NYSCAN

The broad range of E+L inspection systems covers all the different tasks from pre-print to  post-print. The three NYSCAN products  Image:Inspector:2, Web:Inspector:2 and Roll:Scheduler:1are perfectly  harmonized components  for comprehensive quality management during the production process. Uninterrupted quality control from pre-print to post-print increases the efficiency of production .The user of NYSCAN products will profit from long-term customer relationships thanks to top quality work and low production costs .

• Introduction
• Workflow
• Print image comparison with the approved artwork
• Print image inspection systems
• Fault handling at the post-press stage
• News

Print image monitoring system ELSCAN

Digital  print image monitoring is standard with  Erhardt+Leimer.

• Introduction
• Technology
• Print image monitoring ELSCAN, manual positioning
• Print image monitoring ELSCAN, motorized positioning
• Print image monitoring ELSCAN, additional memory for image positions
• Print image monitoring ELSCAN, 2 cameras
• Questionnaire

Surface inspection systems ELSIS

Inspection systems for sheet-type running webs. For process optimization in production lines or quality control at the machine entry or exit end.

Various systems are available to meet the characteristics of the given type of material, of the application conditions and of the task to be performed: for a higher return on investment thanks to better quality and higher productivity!

• System architecture
• System hardware
• System software and operation
• e availability
• Applications in the following industrial branches
• Sample testing

Web Guiding Systems ELGUIDER

The elimination of possible error inducing variables, the permanent and exact alignment of the web and the guarantee of precise reel formation is the task of the E+L web guiding systems.

Keeping in mind the type of material handled, the given application and the specific task Erhardt+Leimer will offer the right solution from a large diversity of different systems: for better quality and higher productivity for the benefit of our customers.

• Introduction
• Control loop
• Position sensors
• Guiding methods - Position
• Sensor positioning
• Positions controllers
• Networking
• Diagnostics/eservice

Please select a product group

Web Tension Measuring and Control systems ELTENS

Reliable web tension monitoring helps reduce the number of web breaks which in turn reduces production costs.
Load sensors from E+L acquire continuously the tension of a running web and emit the tension value as an analog signal. Such a signal is required for dependable web tension measurement and control.

• Introduction
• Control loop
• Flange type load sensor
• Sensor rollers
• Block type load sensors
• Measuring amplifiers
• Digital displays
• Web tension controllers
• Networking
• Diagnostics/eservice
• User interfaces
• Interfaces
• Converters
• Brakes

Please select a product group

Web Guiding and Spreading systems for textiles ELSMART

Erhardt+Leimer web guiding and web spreading systems are designed for the continuously accurate and crease-free alignment of textile webs. Various versions are available to meet the specific requirements of different types of material, different application conditions and tasks.

The cutting-edge increase in quality and productivity!

• Introduction
• Control loop
• Position sensors
• Modes of position control
• Sensor positioning
• Positions controllers
• Network
• Diagnostics/eservice
• User interfaces
• Interfaces
• Segmented roller guider systems ELSMART
• Steering roller systems ELSWING
• Web guiding systems ELTWIN
• Web width spreading systems ELSPREADER

Equipment and system photos for reference only... Please select a product group

Tenter Infeed systems for textiles ELFEED

The efficiency of a tenter system depends on the efficiency of the tenter infeed as this is the point where web must be reliably picked up at its edges by the pins or clips of the transport chain. As the web position changes constantly the position of the tenter infeed elements must also change constantly.

The edges of knit material must be compley uncurled in order to minimize the waste caused by edge trimming.

Only a perfect tenter infeed situation will guarantee a high machine efficiency and thus a high machine output.

• Introduction
• Control loop
• Position sensors
• Modes of position control
• Position controller
• Network
• Diagnostics / eservice
• Command stations
• Interfaces
• Actuators
• Spreading systems

Web Cutting Systems ELCUT

Web cutting systems trim the edges or cut the web into several strips. 

• Shear cut systems
• Circular blade cut systems
• Web severer and clamping device

Web Cutting Systems ELCUT

Web cutting systems trim the edges or cut the web into several strips. 

• Shear cut systems
• Circular blade cut systems
• Web severer and clamping device

Web Cutting Systems ELCUT

Web cutting systems trim the edges or cut the web into several strips. 

• Shear cut systems
• Circular blade cut systems
• Web severer and clamping device

Please select a product group

Full Width Expander for textile tire cord CORDALINER

The E+L width control systems monitor the tire cord width permanently. Different systems are available to match the given applications: for more quality, increased productivity and lower costs.

• Introduction
• Control loop
• Position sensors
• CORDALINER Types of position control
• CORDALINER Sensor positioning
• Position controller
• Networking
• Diagnostics/eservice
• Operator surfaces
• Interfaces
• Edge spreading system EPILINER
• Spreading systems CORDALINER
• Spreading systems X-PANDER

Positioning and Chasing Systems ELPOSER

E+L positioning and chasing systems eliminate possible causes for defects and align tools continuously and with the greatest of accuracies. There are different systems available to handle the very special characteristics of the large variety of materials, applications and tasks. For more quality and higher productivity you can count on!

• Introduction
• Control loop
• Position sensors
• Modes of position control
• Sensor positioning
• Position controller
• Networking
• Diagnostics / eservice
• User interfaces
• Interfaces
• Follow-up systems ELPOSER

Please select a product group

Felt and Wire Tensioners ELSTRETCHER

Paper machine clothings, that is felts and wires, are exposed to many error effects. Excessively high or excessively low clothing tension has a significant influence on the paper production quality and quantity. E+L tension control systems eliminate these error variables and ensure constant fabric tension during the production process.

• Introduction
• Control loop
• Fabric tension sensor for lever-arm type stretcher
• Fabric tension sensor for spindle-type stretcher
• Fabric tension sensor for chain-type stretcher
• Measuring amplifiers
• Tension controller
• Network
• Diagnostics/eservice
• Opertor panels
• Interfaces
• Lever-arm type stretcher systems
• Spindle-type stretcher systems
• Chain-type stretcher systems
• Wrap angle compensation
• Questionnaire

Single SidedFor single-sided double sheet control three different systems are available: the low cost system with sensors based on permanent magnets, the system with electromagnets for steel only and a system with a combination sensor for ferrous and non-ferrous materials.

A100Single-sided double sheet control for ferrous material from 0.04 to 4.00 mm -- mainly, however, for tinplate and similar materials in the metal packaging industry because of the force exerted by the permanent magnets.

E20Double sheet detection in destackers, robot loaders, press feeder. Single-sided air gap tolerant sensors for double sheet control ranging from 0.1 to 12 mm single sheet thickness .

UDK20Single-sided double sheet control for sheet sheet thickness up to 4.00 mm of steel and nonferrous materials. Used heavily in the automotive industry and their parts suppliers for processing steel and e.g. aluminum.

Dual head systems The noncontact double sheet detector system I20 is based on the transmission principle with transmitter and receiver and is especially well suited for pass-through double sheet detection.

I100Noncontact dual head double sheet detection systems for ferrous and nonferrous materials. Steel .01 to 4.00 mm sheet thickness and nonferrous materials .01 to 12.00 mm. However, most applications are in the metal packaging industry with thicknesses at the lower end.

I20Noncontact dual head double sheet detection for ferrous and nonferrous materials; three exchangeable pairs of sensors for steel from .01 to 8.00 mm and nonferrous materials from .01 to 15.00 mm depending on type of material.

TubeWeld seam detection at the tube

SND40The SND40 system combines the strengths of analog sensor technology with high-powered digital signal analysis. A wide range of sensors can be connected to the SND40 system based on leaking flux or eddy current technologies or a combination of both.

SND30The SND 30 is a tried and proven weld seam detection system for tubes with an application history of over 10 years. The system is suitable for steel and magnetic stainless steel for diameters 10 to 250 mm and wall thicknesses up to approximay 4,00 mm.

CoilWeld seam detection at the Coil

SND40The SND40 in conjunction with the weld seam sensors NS9SC is a special system for the butt weld detection in magnetic and nonmagnetic steel coils.

NS9SCThis sensor was specifically developed for the detection of butt welds in magnetic and non-magnetic steel coils.

Single Sided

MDM60Single sided thickness measurement of coils and blanks of ferrous materials. Continuous or interval measurement 5 interchangeable linearized sensors for thicknesses of 0.05 to 3.50 mm

Dual head systems

IDM60Non-contact dual head sensor system for thickness measurement of all non-ferrous materials; especially well suited for non-magnetic stainless steel (Austenit). Measuring range from .005 to 15.00 mm (.0002 - .600in.) sheet thickness depending on the type of material.

Wires and Cable IndustryThe eddy current testing systems are used for defect detection in metallic semi-finished products such as wires, rods, tubes, small strips and cables.

UFD40The UFD40 is best suited for the detection of defects, butt welds and mechanical connections in wires, tubes and cables. It was developed for nondestructive testing in continuous production processes.

Tire IndustryMagnetic inductive systems have been especially developed for steel cord inspection in the steel belted radial tire industry to detect so-called spacing faults during the cutting and splicing operation of the web material.

SIS XPMagnetic inductive systems have been especially developed for steel cord inspection in the steel belted radial tire industry to detect so-called spacing faults during the cutting and splicing operation of the web material.

During the automatic filling of tablet packages with blister strips in the cartoner -- aluminum blisters, alu-alu blisters -- packages can be overfilled or underfilled. Content verification is therefore absoluy necessary. In comparison to the traditional use of checkweighers, the Roland blister comparator I10 KV is based on the inertia free high speed eddy current measurement principle and requires only approximay 100 mm space in the transportation belt.

I10 KVNoncontact verification whether the correct number of aluminium foil blister strips are in the closed package

Hot test	[ Cold test ]	[ Performance test ]	[ Leak test ]
Each engine is tested for proper performance and leaks before being installed into a vehicle. The conventional test method is the hot test, in which the engines run with their own power until a specified engine oil temperature has been reached. This warm up procedure is performed either without applying load to the engine or with load, while all critical engine data are measured, monitored and documented, such as Rpm and torque Oil pressure and oil temperature Coolant temperature and coolant flow Constant Rpm, ignition, injection, timing, blow by, exhaust gas emission, etc. Upon completion of the warm up phase, a short performance test may be performed. Then the operator checks the engine for abnormal noises and leaks.

Engines are randomly subjected to an extended performance (audit) test. The installation conditions for the engine in the audit test stand are reproduced like those in the vehicle (engine mounting, original exhaust system). The fuel and the intake air are conditioned to simulate various operating conditions.

JWF audit test stands are equipped with an extensive array of measuring technology, which includes exhaust gas analysis,
fuel and oil consumption, blow by, ect.

The engines being tested are generally rigged and derigged outside the test stand on a trolley or are loaded onto the test
stand by using a lifting gear.

(Fig.) Performance test stand with trolley for 3- and 4-cylinder petrol engines

We have developed a special Windows NT based test software for the final testing of engines and transmissions. This software is highly flexible and user friendly in adapting to specific customer requirements. The JWF test software essentially consists of:

• the configuration software for parameter setting of the test sequence and the measuring channels and for generating reference curves, which are the basis for determining accept and reject criteria
   
• the measuring software for carrying out the various measurements, for monitoring test stand performance and for calibration of the measuring channels
   
• The analysis software for analysing the various curves and graphs produced during a test from a database