德國Deutsche van Rietschoten & Houwens GmbH剎車片

德國BKW-Kuema GmbH 制冷機

德國BKW-Kuema GmbH過濾器 濾芯

意大利Ultra Pompe S.r.l.齒輪泵

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

產品系列：

G Series Gear Pumps

Materials
Housing: Cast Iron G25
Rotors: Steel 39NiCrMo3
Bearings: PTFE on Stainless Steel
Sealing Elements: Various

Application
Viscosity: from 1CST to 1'000'000CST
Pressure: from 0BAR to 30BAR
Size: from 1.5cc/rev to 300cc/rev
Temperature: from -10°C to +240°C

- OPEN BROCHURE -

N Series Gear Pumps

Materials
Housing: Cast Iron G25
Rotors: Steel 39NiCrMo3
Bearings: Bronze
Sealing Elements: Various

Application
Viscosity: from 1CST to 1'000'000CTS
Pressure: from 0BAR to 15BAR
Size: from 460cc/rev to 1330cc/rev
Temperature: from -10°C to +240°C

OPEN BROCHURE -

S Series Gear Pumps

Materials
Housing: Stainless Steel AISI316L
Rotors: Stainless Steel S31803 Duplex
Bearings: PTFE on Stainless Steel
Wear Plate: Fitted Glass
Sealing Elements: Various

Application
Viscosity: from 1CST to 1'000'000CTS
Pressure: from 0BAR to 30BAR
Size: from 1.5cc/rev to 1330cc/rev
Temperature: from -40°C to +240°C

OPEN BROCHURE -

D Series Gear Pumps

Materials
Housing: -
Shaft: -
Gear: -
Bearings: -
Sealing Elements: Various

Application
Viscosity: -
Pressure: -
Size: -
Temperature: -

F Series Gear Pumps (OUT OF PRODUCTION)

產品系列：

Magnetic Candle Filters are used to filter out ferritic particles from cooling lubricants.

Function:

The specific arrangement of magnetic candle filters in the main stream of soiled cooling lubricant causes ferritic floating particles to be exposed to the maximum possible attraction force generated by the magnetic filter candles. This results in them being extracted from the liquid effectively.

Structure:

Magnetic filter candles are available in two different basic designs:

MFK Design:
The magnetic candle filters are positioned in a circular arrangement

MFK...R Design:
The magnetic candle filters are positioned in a linear arrangement

Magnetic Filter Rolls are designed for automatic cleansing of cooling lubricants. They are used in honing, grinding, deep drilling and turning machines as well as in tempering and washing plants, where ferritic floating particles are to be extracted from the coolant through filtration.
 

Suitable for a continuous purification of soiled cooling lubricants which are produced during the operation of machine tools. It makes sense to use such a Drum Filter with high throughput rates, simply because the throughput in a Drum Filter is 3 or 4 times higher than in a Gravitation Band Filter while the filtration area is identical and no filtration means are consumed by the Drum Filter

Hydrocyclone Cooling Lubricant – cleaning systems operate in all applications where heavy dirt particles are to be separated from low viscous liquids – e.g. on machine tools (especially grinding machines), but also on machining stations, transfer lines and parts washing plants.
 

Automatic Filter Devices are designed for an automated purification of cooling lubricants. They are used in:

• Honing, grinding and glass grinding machines
• Tempering plants
• Washing plants

This type of filter can be used in all treatments where small chips and fine particles are to be filtered out of liquids even if these are of a rather high viscosity. This type of filter has proved its worth and efficiency not only in machining stations, but also in grinding machines, honing machines and wash water conditioning. This filter can be used as an individual system, but also for supplying several machines simultaneously

產品系列：

Continuous Re-Cooling Power Units DL 11V- 1440
for the cooling of oils and emulsions

Immersion Re-Coolers ET12V-580V
for the cooling of liquids 

No additional space required thanks to the possibility of positioning the Immersion Re-Cooler onto the oil or liquid container

Water Re-Cooler WRK 03-100
for laser, motor spindles and plastics processing

Including a fully hermetical cooling agent compressor for the cooling of clean water, glycol mix or emulsion

Control Cabinet Cooler for cover and lateral attachment
Cooling capacity 320 - 5000 Watt

Electronic control systems are prone to malfunctions if exposed to high temperatures. The cooling is often performed by the blowing-in of external air or via indirect air/air heat exchangers without filters

Industrial Disc Brakes

[mechanical operated callipers]

Calliper type MUH

This disc brake needs only a little space and is designed for use in smaller machines. The braking force is created by a spring which is compressed by turning the hand wheel. Suitable for soft braking with small braking forces. Braking force: per calliper 450 N.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type R&H 100.098.01

This spring applied, manually adjusted calliper type is designed for holding or light web tension duties. The braking force is up to 880 N per calliper.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type R&H 200.096.01

The calliper is designed for higher forces. By the flange at the side it can be easily bolted directly to a gear box without using any brackets. The maximum braking force is 5.000 N.

Data sheet (pdf Download) Drawing (CAD Download)

More products "mechanical operated callipers"

Industrial Disc Brakes

[pneumatically operated brakes]

Calliper type MU-101

This calliper of a simple design is ideal for light duties with limited space. It is ideal for small web tension duties. Braking force per calliper: 430 N at p = 5 bar.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type R&H 100

For medium loads. There are 4 different standard thrusters available for this calliper. The shown type R&H 100.103.01 achieves a braking force of 800 N at 5 bar air pressure.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type R&H 200.107.01

For medium to high loads. There are a lot of various thrusters in single or tandem design available. The maximum braking force is 10.000 N per calliper.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type MRA

For medium to high loads. There are a lot of various thrusters in single or tandem design available. The maximum braking force is 10.000 N per calliper.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type MXB

Showing the advantage of continuous developments – compact design and less necessary space – this calliper type can be used on all applications where simple and reliable brakes are required. Using a B-size thruster the braking force is 7.000 N.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type R&H 300.108.04

This calliper type is designed for heavy duty applications with high braking power. The minimum disc diameter is 560 mm, the disc thickness is 30 mm or 38 mm. The braking force is 14.000 N at 5 bar operating pressure.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type GMRP

The strongest calliper type in this range of brakes is designed for heavy duty operations and high braking forces. It will fit to a disc of minimum 610 mm diameter, the thickness must be 25.4 or 40 mm.

Data sheet (pdf Download) Drawing (CAD Download)

More products "pneumatically operated brakes"

Industrial Disc Brakes

[hydraulically operated callipers]

Calliper type R&H 100.250.01

A calliper designed for medium duties. The fluid used for operation is mineral oil type HLP. An operation with water-glycol-emulsion (e.g. Houghtosafe 520) is also possible. The braking force at 100 bar is 2.000 N per calliper.

Data sheet (pdf Download) Drawing (CAD Download)

Modular brake type T 20 / T 40

These calliper types are direct hydraulically operated and due to the compact design ideal for operation under limited space. The braking forces at 100 bar operating pressure are: T 20 = 14.000 N, T 40 = 34.000 N.

Data sheet (pdf Download) Drawing (CAD Download)

Modular brake type 500

Designed for use in Wind turbines, ships propulsion and heavy industry. The housing is electroless nickle plated for optimized corrosion protection. The braking force is 68.000 N at 100 bar.

Data sheet (pdf Download) Drawing (CAD Download)

More products "hydraulically operated callipers"

spring operated brakes

[air released brakes]

Calliper type MU-402

The MU-402 is for use in light application as a failsafe brake. It needs only a little space. The braking force is 850 N, the necessary air pressure to release the brake is 5 bar.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type R&H 200.406.01

The spring operated, air released calliper of the R&H 200 series is suitable for holding and stopping duties. For releasing the brake an air pressure of 5 bar is necessary. A manual release device is integrated in the thrusters. The braking force is 5.000 N per calliper.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type MX 15 S

The spring operated, air released calliper of the MX series is suitable for holding and stopping duties. For releasing the brake an air pressure of 5 bar is necessary. An automatic pad wear compensation is integrated.

Data sheet (pdf Download) Drawing (CAD Download)

Calliper type GMRSP/T

This spring operated, air released calliper was developed for the use in heavy industries. For releasing the brake an air pressure of 4,5 bar is necessary. A manual release device is integrated in the thrusters. The braking force is 33.000 N per calliper.

Data sheet (pdf Download) Drawing (CAD Download)

More products "air released brakes"