德國Hilscher Gesellschaft für Systemautomation mbH通訊卡

德國Hillesheim GmbH加熱管

德國Hilge  泵 泵機械密封

德國Herkules軋輥

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

德國Herion閥門

常用型號：

Herion    "TYP 2c67

VAC230 Hz50-60 VA:12

ART18186230 Q 55 SN:S6SD0019G020001500"

Herion    "TYP 2a67

VDC 24

ART 18185024Q SN：S6DH0019G020001500"

Herion    "MR6HVG 3 001 1 00

Herion    "DBC 6 HG 90 001 1 00

Herion    "MR6HVG 3 001 1 00

Herion    "DBC 6 HG 90 001 1 00

Herion    "MR6HVG 3 001 1 00

Herion    "DBC 6 HG 90 001 1 00

Herion    MR6HVG 3 001 1 00

Herion    DBC 6 HG 90 001 1 00

Herion    520/TDDZ 0.2MPa

Herion    0155 220V 40-60HZ

Herion    0245 220V 50HZ 5VA IP65

Herion    0.02-0.1MPa， NO:0819100

Herion    BEST-NR.2533150   K-NR.39D1341VA3  SERIEN-NR.15/95  ISO-NO.351

Herion    9810/ 0821172   5-25MPA/380V/6A

Herion    2637050  0245  230vac

Herion    OELZ G1 3K SC      80-012.389

Herion    8026570  0801.024.00

Herion    VALVE25 311 50-25 311 50 39D1341/A1

Herion    2631014

Herion    0880300 0.5-8bar

Herion    8026570  0801.024.00

Herion    2623001.305

Herion    "Nr:9033530

Herion    "Nr:8020850    0.2-1.0Mpa

Herion    KEMA02 ATEX 1347X

Herion    TYPE:2622100 Ser.Nr 2622100    DC24V 0.043A   1/8"     4/2

Herion    "2625600  0-10bar

Herion    order no. 0664907: orotection class IP 65

Herion    orderno. 0962120.0200: Operation voltage: 24 v DC: 2/2-way; DN 20   " "  connection G 3/4"; material: orass: sealing: NBR; protection class IP 00 power consumption: 11 Watt: normally closed

Herion    SPEC：AC 220V50HZ  CATNO：2623000.3043   TOP  ATR

Herion    4055201 R1/4

Herion    4045214 R1/4

Herion    0.1-2Kpa  290V  1A  350VA ID：0823200

Herion    2A67 VDC:24 Best.-Nr.1065220 Node cde:S6DH0019G020001500 Pmax 160Bar

Herion    2C67 VDC:220 Best.-Nr.1065248 Node cde:S6SD0019G020001500 Pmax 160Bar

Herion    240.2550-1301 R1/4" 220VAC 50Hz

Herion    9711745.4600.02400, DC 24V 1/2

Herion    9711745.4600.02400, DC 24V 1/2

Herion    KWR  10 T  100  G1/2

Herion    KWR  10 T  100  G1/2

Herion    BPM16S2110A71006100PMAX150BAR

Herion    DBS25S-NR.529PMAX60BAR

Herion    PLATENG25PMAX150BAR

Herion    HDS-1-200-K-7-1-GE009

Herion    25 315 00

Herion    "SPM 12339 S113 S/N 0205002 230V  30MA   50-60HZ

Herion    821097

Herion    821097

Herkules  PROFIBUS-DP connector ，FC3101-4

Herkules  interface module，FC2001-4A

Herkules  LAB V4999   90340   (2007966)

Herkules  700-167  （1）

Herkules  820-308  （7）

Herkules  710-128  （10）

Herkules  400-103  （20）

Herkules  HK43T/1M-H0.9-H1.5-A1/120-SWR 1F-H-1-L24-AS 1F1/40-BWH 1F-J65-1-1-L24;P1:0.9L/MIN;P2:1.5L/MIN,137854-02-02;PN:1.5KW;100L;UN:400/230V;IN:3.1/5.4A ;n：1395mir-1；COSΦ=0.91,F:50HZ,(Nr:85560-311/01)We need :HK43T/ kom.no:85590-311/01

Herkules  001-30-00-8002-030(82450-311/01)

Herkules  LABV656N27

Herkules  3VL9300-3HF05 (COMPLETE;BLACK KNOB)

Herkules  CP7832-1175-0010

Herkules  CP7832-1175-0010

Herkules  000-90-05-8001-002

Herkules  365C-6N52LAB

產品介紹：

Wire, Rod and Small Section Mills

Heavy duty machinery is manufactured by Herkules, especially

known for its rigidity and superior productivity.

P 300/400

P 200/300 at British Steel

The lathes are of true roll lathe design contrary to lighter engine lathe equipment.

higher torque at faceplate

higher cutting forces, allowed

4-way bed design

special overdimensioned bearing arrangements

For top productivity these Herkules roll lathes can

be equipped with:

Multiple tool turret heads

HerkulesGroup HCC KPM KP-10 CNC control,

Having special programming capabilities

Herkules turning/milling Technics

Integrated milling heads

HS 3 at Caribean Ispat

Groove Grinding Machines of short type for rolling ring machining or of long type for ring and roll machining are used for tungsten carbide materials. They are CNC-controlled by use of the specialized HerkulesGroup HCC KPM 10 control with its Herkules Grinding/Milling Technics program.

Herkules NNF

High output Notch Milling Machines of the type NNF, of long or short version for rings or rolls of conventional or tungsten carbide material are also equipped with the HCC KPM control.

Herkules HSF 3

The extreme rigidity of these machines allows also for true combination Groove Grinding/Notch Milling Machine.

The Herkules scope is rounded up by attachments for Groove/Notch checking, full machine automation incl. measuring and approach systems as well as tool grinders and diamond wheel dressers.

Hilge      W022.0340.0004;V5.14404

Hilge      08.03.160019 EURO HYGIA II BLOC 65、/6/7.5/2 11M3、H 39M MOT TYPE 1LA7131 7.5KW 2930MIN IP55

Hilge      HYGIANA—II/3,BLOC---SUPEP;ID-NR:02/08/32591,SAP：96787366;0—11.5  M3/H    H：70—68 M;MOTRO:7.5KW ,2900MIN

Hilge      D-55294  Bodenheim, Pump-Type  ,EURO-HYGIA-BLOC-I/5 ,Nr.22/00/125614  Q=12m3/h ,H=8m ,P=1.5kw ,Mot-Type  1LA7096-4AA , Nr. 00347298-005 , U230/400 ,Vn 1750 min-1 ,f 60HZ , IP55 ,ISO F ,cos 0.82

Hilge      HYGIA II  Bloc-SUPER  Q=29   H=35  P=18.5   Nr:23/06/174359

Hilge      HYGIA-LI/25A-HP 1.5KW 2

Hilge      HYGIA-L-I/10-HP 1.1KW

Hilge      HYGIA-I-BLOGO SUPER

Hilge      HYGIA-II-BLOG-SUPER

Hilge      HILGE-BLOC.A.80/200;NO.45.E.20279/2

Hilge      TYP:VC200LK-02,3000/3600MIN-1;3-MOT.NR:9506625;30/30.5KW

Hilge      PUMP TYP :EURO-HYGIA-II-BLOC-SUPER;NR:23/23/135798;MOT.TYPE.DNK 132 M/2;NO.2465218

Hilge      PUMP-TYPE:HYGIANA-BLOC-II/4 B;NR:02/02/26899;25M3/H;H 90;MOT-TYPE:1LA7164-2AA;P 15.0;NR:00648918-001;I 26.5/15.3;U 400/690;VN 2900;50MIN-1;IP55;

Hilge      PUMP-TYPE:DURTETTA00/03;NO.BF 270573 SAP96777964;1.5KW;3000MIN-1;H=41M

Hilge      Mechanical seal3A1-001-19-AEE03

Hilge      Mechanical seal 3A1-001-19-KIE03

Hilge      Mechanical seal 3A1-001-28-AEE01

Hilge      Mechanical seal 3A1-001-28-AEE03

Hilge      Mechanical seal 3A1-001-28-AEE05

Hilge      Mechanical seal 3A1-L1K-30-AEEF3

Hilge      Mechanical seal 3A1-002-38-kiE03

Hilge      Mechanical seal 3A1-L1K-40-AEEF3

Hilge      Mechanical seal 3A1-L1K-40-kiEF3

Hilge      D-55294 type  EURO-HYGZA-L-I/10-HP  Nr  22/97/116967 Q9 m3/h  H10M Mot. Type1LA  5090-4AA  p1.1KW N 860030501-001 I 4.65/2.7A U 220/380 UN1400 MIN-1 50HZ ZP  55 ISOF COS4  0.82

Hilge      SAP：96702989

產品介紹：

Euro-HYGIA^®

Applications

Single stage, end-suction centrifugal pumps designed to meet the hygienic criteria of sterile technology. CIP and SIP capable in compliance with the performance criteria contained in DIN EN 12462.

EHEDG Test Certificate of CIP cleanability (TNO).

The pumps are suitable for applications in breweries, beverage , dairy, and food processing plants. Also in sterile and pure water systems (WFI), the pharmaceutical industry, computer chip manufacturing, biotechnology, medical technology, as well as in processing systems in the cosmetics industry. Other applications are in special systems in the chemicals and manufacturing industries, in surface treatment, environmental technologies and in the textile industry.

Designs

Euro-HYGIA^® Bloc:

• Stationary on pump foot, Motor with extended stainless steel shaft, Unshrouded

Fields of Application:

Euro-HYGIA^® Bloc-SUPER:

• Stationary on adjustable stainless steel ball feet, Motor with extended stainless steel shaft, Stainless steel shroud

Fields of Application:

Euro-HYGIA^® Adapta^®:

• Stationary on pump foot for fixed installation
• EC standard motors or NEMA motors can be connected easily by means of standard coupling, either directly or via an intermediate adapter flange. Single pump shaft size supported in double bearing.
• Unshrouded

Options:

• With complete coupling without motor
• Stationary on ball feet with stainless steel shroud

Fields of Application:

Euro-HYGIA^® CN:

• Stationary, long coupled on base plate complete with flexible coupling and guard, IEC standard motor, enclosure type IP 55
• Bareshaft
• with base plate, without motor

Fields of Application:

Surface finish

In order to meet the demands of the pharmaceutical food and beverage industries, HILGE has developed the below surface finish requirements:

Design

Casing and back-plate manufactured from heavy duty,deep drawn rolled stainless steel 1.4404 corresponding to AISI 316 L. 4 impeller designs (optimum gentle pumping action): semi-open in rolled stainless steel quality 1.4404, closed in 1.4571 or 1.4581.

Option:

• Two channel impeller or unblockable impeller
• Equipped with sturdy, quick-release clamp
• Equipped with flange ring (HP = High Pressure design)

Shaft seals:

Depending on application and media, single or double mechanical seals, tandem or back-to-back, with flushing or sealing water connection. The inboard mechanical seal is cooled and cleanable due to its optimum position in the product flow. Materials selected to suit media pumped.

Connection types:

• Threaded connections to DIN 11851
• Flange fittings to DIN 2642

Other connections available conforming to the following standards: SMS, RJT, IDF, clamp connection to DIN and ISO or other standards, special sterile threaded fittings and sterile small flanges.

Technical data (depending on pump size and number of speeds)

• Flow: up to 250 m³/h
• Differential pressure: up to 7 bar
• Working pressure: up to 16 bar, higher working pressures on request
• Operating temperature: up to 140°C, higher temperatures on request

Additional options:

• Pumps on stainless steel trolley with motor starter switch and cable
• Pump foot made of stainless steel
• Casing drain DN 15 (other sizes possible)
• Heating jackets.
• Special paint for motor.Cast-iron and steel motor parts.
• Euro-HYGIA^® Adapta^® and CN with ex-protected three-phase motor EEx e II T3 / EEx de IIC T4
• Motors with special voltages and frequencies
• Euro-HYGIA^® Bloc and Bloc-SUPER with integral frequency inverter in the terminal box as Euro-HYGIA^® tronic to 7.5 kW
• Packed gland as shaft seal, single or flushed
• With double mechanical seals, depending on model, with attached flush or thermosyphon systems.

產品介紹：

Description and construction of a Hillesheim heating hose

Whenever media needs to be transported from a device or a system to some other part of the device or system, and the piping cannot be rigidly installed, fl exible heated hose lines can be used for transportation purposes.

In the majority of applications, it is a requirement to maintain the product temperature at a constant level, irrespective of the temperature fl uctuations in the system or the ambient temperature.

Why are heating hoses used:

• so as to keep media fl owable for processing
• to achieve their optimum characteristics for processing
• to avoid the formation of condensate in gaseous media
• to process economically
• to ensure uniform quality
• to enable production or measurement at any location
• to connect moving parts and equipment

Products

Industry Heating Hoses

Analytical Heating Hoses

Industry Heating Hoses

Standard heating hose

Series H 100 / H 700 / H 200 / H 800

Applications:
Heating or heat-loss free transport of: oil, grease, wax, resin, glue, hotmelts, tar, paint, water, carbon dioxide, plastics, sealants, etc.

Technical details

250 °C

Heating hose system for adhesive and plastic

H200 Special

Applications:
Heating or heat-loss free transport of: adhesive, rubber,  etc.

Technical details

250 °C

Heating hose system for co-extrusion for the plastics industry

H 800 Special

Applications:
plastic industry, Co-Extrusion

Technical details

250 °C

Heating hose with stainless-steel presure hose T-5

Series H 900

Applications:
Heating or heat-loss free transport of: oil, grease, wax, resin, tar, paint, water, carbon dioxide, plastics, sealants, etc.

Technical details

600 °C

Heated twin-hose

Series H 400

Applications:
Polyurethane foam processing, epoxy resin systems, paint spraying systems, dual-component casting systems.

Technical details

80 °C

Heating hose with internal heating

Series H 500

Applications:
Low-viscosity and gaseous media such as water, oil, lye, acid or air.

Technical details

100 °C

Heating hose with explosion approved heating conductors

H 600 (Ex)

Applications:
Chemical industry, pharmaceuticals, gas analysis

Technical details

60 °C
120 °C
200 °C

Double-jacket heating hose

HDM 95 / 200

Applications:
metering technology, food stuff industry, filling installation

Technical details

95 °C
200 °C

Heat transfer hose

HDM 60 / 62

Applications:
Plastics-installations, PU-installations, 2K-casting systems, glue-installations

Technical details

60 °C
200 °C

Heated pipe systems

Series HR

Applications:
Filters, valves, measuring gass distributor, cold-zones and tanks.

Technical details

900 °C

Transfer / unload hose

Series HE

Applications:
Tranfer chemicals, solvents, oils, greases and abrasive materials.

Technical details

90 °C

Compact foodstuffs hose with integrated heating and optional electronic control

Series HL 40 / 80

Applications:
foodstuffs industry, transport fatty (especially animal and vegetable fats and oils) and non-fatty foodstuffs.

Technical details

80 °C

Heated water-hose

Series HW 19 / 25

Applications:
Living and working containers, site installations, mining operations, refugee camps, military operations, stalls and caravans, christmas fairs, catering.

Technical details

60 °C

產品介紹：

Products

PC-Cards

PC/104 | PC/104+ | PCI | PCI 104 |PCI Express | Compact PCI |PCMCIA | Mini PCI | Mini PCI Express | PMC

Modules

COM | netIC | netDIMM | netJACK

ASICs

EC1 | netX

Gateways

netLINK | netTAP | Protocol Converter | IO-Link | netBRICK |netSWITCH

Switches

QVis | netHMI

Controller

netPLC

Boards

IO | netX

Analyzer

netANALYZER | SERCOS Monitor

Accessories

Assembly Interface | Cable

Kits

Real-Time-Ethernet-Kit

Software

Driver | Server | DTM | Configurator

Partner products

Rockwell | Siemens AG