德國Ihne&Tesch加熱器

HydroWer-Hydraulik GmbH

德國Hilge  泵 衛生泵

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

Euro-HYGIA^®

Applications

Single stage, end-suction centrifugal pumps designed to meet the hygienic criteria of sterile technology. CIP and SIP capable in compliance with the performance criteria contained in DIN EN 12462.

EHEDG Test Certificate of CIP cleanability (TNO).

The pumps are suitable for applications in breweries, beverage , dairy, and food processing plants. Also in sterile and pure water systems (WFI), the pharmaceutical industry, computer chip manufacturing, biotechnology, medical technology, as well as in processing systems in the cosmetics industry. Other applications are in special systems in the chemicals and manufacturing industries, in surface treatment, environmental technologies and in the textile industry.

Designs

Euro-HYGIA^® Bloc:

• Stationary on pump foot, Motor with extended stainless steel shaft, Unshrouded

Fields of Application:

Euro-HYGIA^® Bloc-SUPER:

• Stationary on adjustable stainless steel ball feet, Motor with extended stainless steel shaft, Stainless steel shroud

Fields of Application:

Euro-HYGIA^® Adapta^®:

• Stationary on pump foot for fixed installation
• EC standard motors or NEMA motors can be connected easily by means of standard coupling, either directly or via an intermediate adapter flange. Single pump shaft size supported in double bearing.
• Unshrouded

Options:

• With complete coupling without motor
• Stationary on ball feet with stainless steel shroud

Fields of Application:

    HUGO TILLQUIST AB成立于1895年，在過去的100多年中，HUGO TILLQUIST AB已經為測量和檢測市場提供了*的產品。這些年來，我們已取得的經驗和訣竅的方式是*的為我們的業務范圍內的公司，我們已轉化為競爭力的。我們的銷售工程師在技術上是非常有能力，為我們的客戶，從而節省了時間和金錢。在早期階段，對于某一個問題，能夠提出正確的產品，使決策過程更快。

產品簡介：

電流傳感器，電壓傳感器，測量傳感器，壓力變送器，繼電器，控制電路板

cos-phi / phase angle

Transducer with analog output proportional to cos-phi or phase angle in degrees.

部分型號：

LQT50-IVT

LQT50-IVT

I480L-154

VU400L-154

Q400-054

U400L-153

TZ41 4-20MA/4-20MA

VR402L-153 AC-supply 220V

Shut off Valve Shut off valves for the suction pipe NG 32-125 ? SAE 11/4-5? ? ND 16 With free passage according to the nominal width. permissible operating pressure: 16 bar over pressure 0,7 bar under pressure 4 bar difference pressure when shut valve closed General: The shut off valves are mainly conceived for installation into pump suction pipes. The basis line has a SAE-connection shape with connection dimensions according to SAE-standard J518 - 3000 psi. After loosening the pipeline or the elastic pipe connection the shut off valve remains fixed to the part to be closed by fixing screws in the SAE-connection shape. The inner diameter of the shut off valve is enlarged by the plateand threshold level diameter so that the free cross section complies to the nominal width. The plate and the threshold are formed to avoid a spin of the oil stream. A bolt which automatically snaps in any switch position guarantees arrestoring in any switch position. The bolt snaps into the switch plate which is fixed in a way that it cannot be lost, so that the shut off valve is always arrestored even without shifter. Various additional flanges and parts make direct boltening to the oil tank (T-flange) or the installation into a pipeline (tapped bushings) possible. Due to the lateral openings (? 0) it is possible to fix the shut off valve between flanges or heavy (long) suction pipes can be held by additional screws. The shut off valves can be equipped with a limit switch, which is operated through the unloosable switch plate which is fixed so that it cannot be lost. Explosion-proof limit switches are possible. Technical data: Perm. operat. pressure: 16,0 bar - over pressure 0,7 bar - under pressure 4,0 bar - difference pressure when shut valve is closed Permis. temperature range: -20癈 up to +80癈 Material: Cage and shifter - aluminium Sealings - NBR Other parts - steel galvanized

DG/DGS Nozzle BandHeaters      DG: up to 280°C  DGS: up to 350°C  Plastic sealed  Original equipment for all     standard injection moulding   machines

DGM High Performance Nozzle Band Heaters   DGM: up to 600°C  For ambitious polymer    processing of technical    plastics  With integral Thermocouple  Longer life times

Z/ZAW/ZWM Band Heaters with Mica insulation    Up to 280°C  For all standard machine    types   For injection moulding and    extrusion

KHK cermic Band Heaters   Up to 400°C  Robust, electrical Heating  Established technique  High electrical load

M/MC mineral insulated Band Heaters   M: up to 450°C  MC: up to 550°C  Sufficient power reserve   With limited space ratio

ZAK Aluminium compact Band Heaters   Up to 450°C  Perfect energy efficiency   Suitable with complex    constructions  High operating safety   long life time