分體式半自動CIP系統Split type semi-auto CIP cleaning system

清洗液的加熱為自動加熱方式，通過溫度控制儀設定清洗溫度，控制蒸汽調節閥的開啟量來限制蒸汽的量從而使清洗液維持在所需的溫度；CIP站各罐內液位的高低采用自動報警并指示；當清洗液的濃度降低時，通過人工補加濃酸濃堿；清洗過程轉換通過人工操作相應的管路閥門進行；罐內缺水時進行人工補水；

The heating way for the cleaning liquid is auto-heating.The operating principle:set the cleaning temperaturethrough the temperature controller to control the steam control valve's opening frequency to limit the steam amount making the cleaning liquid keep at needed temperature.All the tanks liquid level in the CIP system adopt the auto-alarm.It wil be by manual when the cleaning liquid concentration reduced.The cleaning process transforming should be operated by the manually to change some relevant pipelines and valves.

Workers should increase the water when the tank is lack of water.