進口臥式端吸離心單級泵

進口臥式端吸離心單級泵概述：

水泵采用為單級單吸離心泵，軸向進水，經向出水，泵殼地步與底座固定。整體式泵軸，采用油脂潤胡的導向深溝球軸承。泵與電機之間采用半彈性聯軸器相連。標準型密封為長壽面、耐磨機械密封。

特點：

1采用后拉式結構，維修時無須拆除泵殼及管路。
2、所有泵型采用4種泵軸，*地提高了零件的互換性，且軸采用火焰校直，消除軸內部應力，提高了軸封的壽命。
3、所有葉輪均經過二次切削，已滿足客戶的實際需要。
4、葉輪前后均有耐磨口環，方便水泵的維護，提高了泵殼和葉輪的壽命，對長時間維持水泵的高效率提供了保證。
5、可選配易拆卸聯軸器，方便客戶在不移動電機的情況下，對水泵進行維護。

進口臥式端吸離心單級泵適用范圍：
供水、供熱、空調系統、增壓供水、消防噴淋系統、噴灑、灌溉、游泳池、噴泉供水等、過濾凈水系統

進口臥式端離心單級泵技術參數：

流量：2～1450m3/h  揚程：5～135m  口徑：15～500mm   

功率：0.55kw～160kw  系統zui高工作壓力：≤1.6MPa          
介質溫度：-15℃～+105℃   環境溫度：T≤40

電機防護等級：IP54或IP44
電機絕緣等級：B級或F級

進口臥式端離心單級泵美國泰樂TYLER售后服務：

用戶*，信譽*，優質、*的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷*科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

Horizontal centrifugal pump

Introduction of imported horizontal end suction centrifugal single stage pump:

Water pump is a single-stage single suction centrifugal pump, axial water, through the water, the pump shell and the base fixed. The pump shaft, the guide of deep groove ball bearing grease Yun hu. The pump is connected with the motor by semi elastic coupling. Standard seal for long life, wear-resistant mechanical seal.

Imported horizontal end suction centrifugal single-stage pump features:

1 after the pull structure, maintenance without dismantling the pump casing and pipeline.

2, all the pump using 4 kinds of pump shaft, greatly improves the interchangeability of parts, and the flame straightening shaft, shaft to eliminate internal stress and improve the life of shaft seal.

3, all impeller after two cutting, has to meet the actual needs of customers.

4, before and after the impeller wear ring, convenient maintenance of water pump, improve the pump casing and impeller life, for a long time to maintain the high efficiency of the pump provides a guarantee.

5, optional and easy to disassemble coupling, convenient for customers in the case of not moving the motor, the water pump maintenance.

Imported horizontal end suction centrifugal single-stage pump applicable scope:

Water supply, heating, air conditioning system, pressurized water supply, fire sprinkler system, spray, irrigation, swimming pool, fountain water supply, filtration water purification system

Technical parameters of imported centrifugal pump with horizontal end:

Flow rate: 2 ~ 1450m3/h head: 5 ~ 135m diameter: 15 ~ 500mm

Power: 0.55kw ~ 160kW system maximum working pressure: 1.6MPa

Medium temperature: -15 to +105 DEG C temperature: T = 40

Motor protection level: IP54 or IP44

Motor insulation grade: class B or class F

The imported Horizontal single-stage pump centrifugal end America TYLER Taylor customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.