進口立式單級單吸蝸殼泵

進口立式單級單吸蝸殼泵性能范圍：

揚程：10~60m（m）  吸入口徑：1200（mm） 流量：0.53~8.08（m3/h）轉速：3000（rpm）

工作原理以及結構：

旋蝸殼泵是由泵體、支架體、蓋、軸、上軸承部件、下軸承部件、葉輪、吸入彎管和底座，其中支架體位于泵體頂部，吸入彎管和底座位于泵體底部，泵軸、上軸承部件和下軸承部件位于支架體內，葉輪位于泵體內，吸入彎管和底座為一體式結構，上軸承部件和下軸承部件分別通過螺栓固定在支架體內，支架體通過螺栓連接在泵體頂部。

立式蝸殼泵將吸入彎管與底座合為一個零件，增大了吸入彎管的強度與剛度，能夠承受更大的流動介質的作用力，降低泵體的振動;泵蓋與支架體合為一個零件，結構簡化，便于維護檢修;上、下軸承部件可一起從支架體中取出，便于維護檢修。

進口立式單級單吸蝸殼泵技術參數：

流量：0-2600m3/h(m3/min、L/min、L/s、L/h)
揚程：0-1200m
轉速：0-2900r/m
口徑：0-500mm
電壓：220/380V
密封：NBR、EPDM、硅橡膠、PTFE、機械密封
電機功率：0.18-300KW
工作壓力：0-200MPa
產品材質：塑料，鋁合金，鑄鐵，鑄鋼，不銹鋼304、316、316L，合金鋼

美國泰樂TYLER售后服務：

一流的服務鑄就*的企業讓客戶無后顧之憂。
1、按合同要求提供產品的合格證、銘牌、檢驗報告、產地證名、安裝說明書等。
2、顧客在驗收產品過程中，如出現與合同要求不符時，我司接到顧客通知后兩小時內給予處理。
3、我司提供十二個月以上產品質保期，時間從驗收合格之日起計算。
4、在正確安裝和使用下，出現產品質量問題，本公司將負責到底。

Vertical single stage single suction volute pump

Performance range of imported vertical single stage single suction volute pump:

Head: 10~60m (m) suction diameter: 1200 (mm) flow: 0.53~8.08 (m3/h) speed: 3000 (RPM)

The working principle and structure of vertical single stage single suction volute pump:

Rotary volute pump is composed of a pump body, a support body, cover, shaft, bearing parts, bearings, impeller, suction elbow and the base, the bracket body is positioned at the top of the pump body, suction elbow and the base is located at the bottom of the pump body, pump shaft, bearing parts and bearing parts in the bracket body, the impeller is located the pump body, suction elbow and the base is an integral structure, the upper bearing member and the lower bearing parts are respectively fixed on the bracket body through bolts. The bracket body is connected to the top of the pump body by bolts.

Vertical volute pump suction elbow and the base are combined as a part, increasing the suction bend strength and stiffness, force can withstand greater flow of media, to reduce the vibration of the pump body; the pump cover and the bracket of a body parts, simple structure, convenient maintenance and repair; upper and lower bearing parts can be go out of the bracket body, convenient in maintenance and repair.

Technical parameters of imported vertical single stage single suction volute pump:

Flow rate: 0-2600m3/h (m3/min, L/min, L/s, L/h)

Lift: 0-1200m

Speed: 0-2900r/m

Caliber: 0-500mm

Voltage: 220/380V

Seal: NBR, EPDM, silicone rubber, PTFE, mechanical seal

Motor power: 0.18-300KW

Working pressure: 0-200MPa

Product material: plastic, aluminum alloy, cast iron, cast steel, stainless steel 304, 316, 316L, alloy steel

Imported vertical single-stage single suction volute pump the TYLER customer service service taylor:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.