進口高壓鍋爐給水泵｜美國高壓鍋爐給水泵

進口高壓鍋爐給水泵結構說明：

高壓鍋爐給水泵為多級分段式，其吸入口位于進水段上，成水平方向，吐出口在水段上垂直向上，其揚程可根據使用需要而增減水泵級數。多級離心泵裝配良好與否，對性能影響關系很大，尤其是各個葉輪的口出與導翼的進出中心，其中稍有偏差即將使水泵的流量減少，揚程降低效率差，故在檢修裝配時務必注意。高壓鍋爐給水泵主要零件有:進水段、中段、出水段、葉輪、導翼擋板、出水段導翼、軸、密封環、平衡環、軸套、尾蓋及軸承體。進水段、中段、導葉擋板、出水段導翼、出水段及尾蓋均為鑄鐵制成，共同形成泵的工作室。

進口高壓鍋爐給水泵工作原理：

高壓鍋爐給水泵實際上屬于多級泵，鍋爐給水泵工作原理相當于把幾個葉輪組裝在一根泵軸上串聯起來工作，泵軸上葉輪的數量也就是屬于表示幾級離心泵，例如一個葉輪的揚程是10米那么泵軸上面加裝5個葉輪相當于此時揚程可達50米，鍋爐給水運行時，水由泵進口被吸入，然后依次由*個葉輪壓入到一個葉輪，每經過一個葉輪，壓力就會增加一倍，所以通暢被稱為高壓鍋爐給水泵。

進口高壓鍋爐給水泵技術參數：

流量：350-2400m3/h
揚程：1700-3100m
進口口徑：200-300mm
出口口徑：150-250mm
NPSHFr：22-125m
效率：75-84%
轉速：5150-6435r/min
功率：3200-21000kw
材質：鑄鋼、不銹鋼

進口高壓鍋爐給水泵美國泰樂TYLER售后服務：

用戶*，信譽*，優質、*的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷*科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

High pressure boiler feed water pump

Description of inlet high-pressure boiler feed pump:

The high pressure boiler feed water pump is multistage segment type, its suction mouth is located on the water inlet section, it is in the horizontal direction, and the outlet is vertical upward on the water section. Multistage centrifugal pump assembly is good or not, a great impact on the performance, especially the export and import guide wing center, which will make a slight deviation of pump head decreases flow reduction, poor efficiency, so be sure to pay attention in the maintenance assembly. The main parts of high pressure boiler feed water pump: water inlet section, the middle section of the water, the impeller and the guide vane damper, outlet section of guide vane shaft sealing ring and balancing ring and sleeve and a tail cover and the bearing body. The water inlet section, the middle section, the guide vane baffle plate, the water outlet section guide wing, the water outlet section and the tail cover are made of cast iron, which forms a pump working chamber.

Working principle of feed pump for imported high pressure boiler:

High pressure boiler feed pump actually belongs to the multi-stage pump, the working principle of boiler feedwater pump is equivalent to several impeller assembled in a pump shaft in series, the number of pump shaft impeller is belongs to the few stage centrifugal pump, such as an impeller head is 10 meters above the pump shaft so the installation of 5 impeller is equivalent to the head up to 50 meters, boiler operation, water from the pump inlet is inhaled, followed by the first impeller pressure into an impeller, with each impeller, pressure will be doubled, so smooth called high pressure boiler feed pump.

Technical parameters of high pressure boiler feed water pump:

Flow: 350-2400m3/h

Lift: 1700-3100m

Inlet diameter: 200-300mm

Outlet diameter: 150-250mm

NPSHFr:22-125m

Efficiency: 75-84%

Speed: 5150-6435r/min

Power: 3200-21000kw

Material: cast steel, stainless steel

The United States imports of high-pressure boiler feed pump TYLER Taylor customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.