進口單級單吸離心泵｜美國進口直聯式離心泵

進口單級單吸離心泵參數：

流量：2-1080m3/h
揚程：5-150m
口徑：進口直徑：50-300mm
       出口直徑：32-250mm
轉速：2900r/min和1450r/min或1480r/min兩級
功率：1.5-160kw
效率：24-88%
材質：鑄鐵、不銹鋼
電壓：380V、480V、415V、660V
頻率：50Hz、60Hz
zui高轉速：3500r/min(用于60HZ電源時，葉輪直徑有所減小)
zui高使用溫度：105℃
軸封：填料密封或機械密封
zui低使用溫度：-10℃
zui大工作壓力：一般為1MPa，如承壓件規定用球墨鑄鐵或鑄鋼制造，可達1.6MPa，請在訂貨時說明

進口單級單吸離心泵結構特點介紹：

進口單級單吸離心泵的基本結構差不多主要是由泵與電機和底座三大部分構成，其中泵

主要是由泵體、葉輪、軸、密封件、懸架、泵蓋、軸承體等幾部分組成。其中葉輪、軸、軸套

等組成了泵的轉子部件。在安裝使用時候注意一些細小的環節，如不能讓其他物質從泵的進出

水口進入泵體內，注意泵與電機的同心、填料密封的安裝、緊固螺栓的擰緊程度等，注意各個

細節，保證臥式離心泵的運行效率。

該系列的單級單吸離心泵除IS型的泵是采用的填料密封之外，其余的軸封方式都是采用的機械

密封。

進口單級單吸離心泵，美國進口單級單吸離心泵品牌（美國泰樂）適用范圍：

泵的零件用不銹鋼板壓制，經激光焊接而成，并有多種牌號的不銹鋼可供選用，因而泵的用途十分廣泛，主要適用于輸送各種潔凈水及輕腐蝕液體，可用于 住宅供水及增壓 工業鍋爐給水空調系統循環體會水　水處理和反滲透系統 食品工業、醫藥工業用水。

美國泰樂TYLER進口單級單吸離心泵售后服務：

用戶*，信譽*，優質、*的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷*科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

Imported single stage single suction centrifugal pump United States imported straight centrifugal pump

Single stage single suction centrifugal pump:

Flow: 2-1080m3/h

Lift: 5-150m

Caliber: inlet diameter: 50-300mm

Outlet diameter: 32-250mm

Speed: 2900r/min and 1450r/min or 1480r/min level two

Power: 1.5-160kw

Efficiency: 24-88%

Material: cast iron, stainless steel

Voltage: 380V, 480V, 415V, 660V

Frequency: 50Hz, 60Hz

Maximum speed: 3500r/min (for 60HZ power supply, the impeller diameter decreased)

Maximum operating temperature: 105

Packing: packing seal or mechanical seal

Minimum operating temperature: -10

Maximum working pressure: generally 1MPa, such as the provisions of the pressure bearing ductile cast iron or cast steel manufacturing, up to 1.6MPa, please specify when ordering

Introduction to the structure characteristics of imported single stage single suction centrifugal pump:

The basic structure of the centrifugal pump is mainly composed of three parts, the pump and the motor and the base

Mainly by the pump body, impeller, shaft, seals, suspension, pump cover, bearing body, etc.. The impeller, shaft, shaft sleeve

The rotor component of the pump is formed. In the installation and use of attention to some small links, such as can not let other substances from the pump in and out

Nozzle into the pump body, pay attention to the pump and the heart of the motor, the installation of packing seal, tighten the degree of tightening bolts, etc.

Details to ensure the operation efficiency of horizontal centrifugal pump.

Pump single stage single suction centrifugal pump in the IS type of the series is the use of the packing seal, seal the way the rest are used in machinery

Seal up。

The import of single-stage single suction centrifugal pump, the United States imported single-stage single suction centrifugal pump brands (American scope Taylor):

Stainless steel plate pressing pump parts, laser welding, and a variety of grades of stainless steel can be used, so the pump is widely used, mainly for conveying a variety of corrosive liquid light and clean water, can be used for residential water supply and booster industrial boiler air conditioning system of circulating water treatment and reverse osmosis the system food industry, pharmaceutical industrial water.

The United States imports of tylosin TYLER single stage single suction centrifugal pump with customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.