1747-L531 1747-L531  1747-L531
**********************************************************

全國zui大的備件庫！---------：張可可
選擇zui有權利的公司！-----：
選擇*的質量！--------
選擇的產品！---------
選擇的服務！------------
選擇zui快的貨期！---------------:
選擇*的價格！------------------:

**************************************************************

9. Establish communication to the processor. Reference
Refer to the following to establish communication between the processor and your 
personal computer.
Chapter 8
(Starting Up Your 
Control System)
Set the communication parameters of software to match the default parameters of the processor.
Processor Procedure
SLC 5/01 Connect 1747-PIC interface from the processor to your personal computer serial port or 
connect 1747-UIC interface from the processor to your personal computer USB port, or use a 
1784-PKTX(D) or 1784-PMCK interface.
SLC 5/02 Connect 1747-PIC interface from the processor to your personal computer serial port or 
connect 1747-UIC interface from the processor to your personal computer USB port, or use a 
1784-PKTX(D) or 1784-PMCK interface.
SLC 5/03 Connect the 1747-PIC interface from the processor to your personal computer serial port or 
connect the 1747-UIC interface from the processor to your personal computer USB port to 
the processor by using the 1747-C13 or 1747-CP3 cable. You can also use a 1784-PKTX(D) or 
1784-PCMK interface, or a 1747-CP3 cable from channel 0 of the processor to the personal 
computer serial port.
SLC 5/04 Connect a 1747-CP3 cable from channel 0 of the processor to the personal computer serial 
port or connect the 1747-UIC interface from channel 0 of the processor to your personal 
computer USB port, or use a 1784-PKTX(D) or 1784-PCMK interface.
SLC 5/05 Connect a 1747-CP3 cable from channel 0 of the processor to the personal computer serial 
port, or connect the 1747-UIC interface converter from channel 0 of the processor to your 
personal computer USB port. For Ethernet connection, connect channel 1 of the processor 
and the PC Ethernet card to an Ethernet hub by using 10/100Base-T compatible cable.
(1)
(1)
EtherNet/IP address must first be set via BOOTP or an RS-232 connection. See appendix C for more information.
Comms Channel Channel 0 
Configuration
Channel 1 Configuration
SLC 5/01 and 5/02 SLC 5/03, 5/04, and 5/05 SLC 5/03 SLC 5/04 SLC 5/05
DH-485:
•19.2 Kbaud
•node address = 1
DF1 Full-duplex:
•no handshaking
•19.2 Kbaud
•CRC Error Check
•duplicate packet, 
detect on
•no parity
DH-485:
•19.2 Kbaud
•node address = 1
DH+:
•57.6 Kbaud
•node address = 1
Ethernet:
BOOTP enabled