AB  1747-L553   SLC 500 Modular 詳細(xì)說明：
Hardware StyleImportant User Information
Solid state equipment has operational characteristics differingfrom those of 
electromechanical equipment. Safety Guidelines for the Application, 
Installation and Maintenance of Solid State Controls (publication SGI-1.1 
available from your local Rockwell Automation sales office or online at 
http://literature.rockwellautomation.com) describes some important 
differences between solid state equipment and hard-wired electromechanical 
devices. Because of this difference, and also because of the wide variety of 
uses for solid state equipment, all persons responsible for applying this 
equipment must satisfy themselves thateach intended application of this 
equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for 
indirect or consequential damages resulting from the use or application of 
this equipment.
The examples and diagrams in this manual are included solely for illustrative 
purposes. Because of the many variables and requirements associated with 
any particular installation, Rockwell Automation, Inc. cannot assume 
responsibility or liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to 
use of information, circuits, equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without 
written permission of Rockwell Automation, Inc., is prohibited.
Throughout this manual, when necessary, we use notes to make you aware 
of safety considerations.
WARNING
Identifies information about practices or circumstances that can cause 
an explosion in a hazardous environment, which may lead to personal 
injury or death, property damage, or economic loss.
IMPORTANT
Identifies information that is critical for successful application and 
understanding of the product.
ATTENTION
Identifies information about practices or circumstances that can lead 
to personal injury or death, property damage, or economic loss. 
Attentions help you identify a hazard, avoid a hazard, and recognize 
the consequence
SHOCK HAZARD Labels may be on or inside the equipment, for example, a drive or 
motor, to alert people that dangerous voltage may be present.
BURN HAZARD Labels may be on or inside the equipment, for example, a drive or 
motor, to alert people that surfaces may reach dangerous 
temperatures.
Publication 1747-UM011G-EN-P - June 2008