B.JS系列注塑機

B.Jsseries injection molding machine

本機型改變了傳統以三通比例閥調節系統壓力和流量的模式，采用高響應比例變量泵系列，使注塑機液壓系統的輸出功率與機器運行的能量相匹配，避免高壓節流溢流能量的損失，和普通定量泵機器相比，可節電30%-50% ， 機器散發熱量降低，可以節省冷水使用量30%以上，降低機器周圍的噪音增加油路液壓密封件液壓油的使用壽命，使機器使用和維護費用大為減少，同時也符合當前嚴格的環保要求，經濟效益十分明顯。

Injection molding machine applies high reponsive proportional variable pump system to replace the traditionl 3-way proportionl valve control mode , thus to enable the high match of power betweem hydraulic out put and machine effective operation which avoids energy loss from high pressure throttle , flow , compared with normal constant pump drive machine the variable pump drive machine is able to save . in addtion , the machine less heating enables save of cooling water by 30% , debasing perheral noise and extension of service life hydraulic sealing part sand oil to minimize operation and maintenance cost and meanwhile to meet the strict international enviroment protective policy finally , the amount of the output increases obviously.