CO2 incubator is an advanced equipment for culture of cell, tissue and bacteria, widely applied to research of microbiology, medicine, agricultural science and pharmacology, such as culture of various cell and tissue, research of AIDS, tumor and heart disease, virus proliferation, bacterium culture, bacterial culture, genetic engineering, test-tube baby, cloning technology, pharmacological science, microbiology, immunology, etc.
Microcomputer based inligent controller (digital display or liquid crystal display) has control functions of temperature control, CO2 gas, door temperature, water level, ultraviolet lamp and timing, also has safety protection functions of over-temperature, high/low water level and alarm.
CO2 inlet port is equipped with high performance microbiological filter that is aimed at the particles whose diameter is equal to 0.3um, the filter efficiency reaches 99.99, it is able
to filtrate off the bacteria or dust grain in CO2 gas effectively.
Ultraviolet germicidal lamp, located at rear wall inside the incubator, is able to disinfect the inner incubator regularly, kill the floating bacteria in circulating air or in vapor of humidifying pan in the incubator, it is able to effectively prevent pollution during the cell culture.
Door of CO2 incubator is able to heat the inner glass door, preventing the glass from producing condensation water that would lead to microbial contamination.
※采用抗菌不銹鋼內膽，腔內四角圓弧，便于清潔擱架可調。
Adoption of antimicrobial stainless steel internal bladder, four corners in the chamber are of circular arc, it is convenient for cleaning, ａnd the shelf is adjustable
The upgraded type LCD inligenttemperature controller has the higher precision in temperature control besides above-mentioned functions, it is equipped with the imported infrared concentration probe which brings more stable CO2 condensation and more prefect safety protection, in addition, it has RS-485 interface (optional) that is connected with the printer and computer to record the change of temperature parameters.
技術參數(shù)Technical parameters：：
型 號 Model
技術參數(shù)Tech. parameters
CHP-80（Q、S、E）
CHP-160（Q、S、E）
CHP-240（Q、S、E）
容 積 Volume
80L
160L
240L
控制方式Control mode
智能控制Inligent control
控溫范圍Temp. range
RT+5～60℃
控溫精度Accuracy of temp. control
±0.3℃
溫度分辨率Temp. resolution
0.1℃
CO2范圍Rang of CO2
0-20%
CO2精度Accuracy of CO2
0.1%
CO2均勻性Homogeneity of CO2
5%時，±0.1%（紅外線傳感器）
At 5%, it will be ±0.1%（IR sensor）
CO2報警CO2 alarm
±0.1℃
CO2恢復時間CO2recovery time
≤濃度值×1.2min ≤concentration value ×1.2min
加濕方式Humidification mode
自然蒸發(fā)Natural evaporation
工作環(huán)境溫度Temp. of working environment
+5～35℃
電 源 Power supply
～220V 50Hz
功 率Power
≤500W
≤700W
≤1100W
工作室尺寸Dim. of workroom（mm）
500×400×400
500×500×650
600×550×750
外形尺寸Outline dim.（mm）
550×510×840
650×610×990
750×650×1090
載物托架（塊）（標配）Shelves (normal)
2
3
3
備注Remark
注：“Q”為氣套式，帶“S”為水套式，帶“E”為液晶控制器
Note: “Q” represents gas jacket type, “S” represents water jacket type, “E”represents LCD controller.
玛曲县|
花莲县|
和静县|
洪湖市|
望奎县|
正蓝旗|
洪洞县|
时尚|
额济纳旗|
绍兴市|
张北县|
洛南县|
桑植县|
始兴县|
杭州市|
黄陵县|
镇巴县|
浮梁县|
嘉峪关市|
益阳市|
大港区|
金阳县|
昭平县|
庆元县|
陇川县|
宁城县|
阳江市|
泰来县|
阳山县|
灵台县|
新津县|
宝坻区|
黄浦区|
墨竹工卡县|
中江县|
洪洞县|
新余市|
宣汉县|
临泽县|
阿克|
正镶白旗|