當前位置：河南省瑞朗機械設備有限公司>>破碎設備>>破碎機>>小型錘式破碎機

小型錘式破碎機

返回列表頁

參考價: ￥ 9000 ￥ 8800 ￥ 8600

訂貨量: 1-4 臺 5-9 臺 ≥10 臺

具體成交價以合同協議為準

產品型號pc-520x310

品牌其他品牌

廠商性質經銷商

所在地鄭州市

在線詢價收藏產品

聯系方式：李光斌查看聯系方式

更新時間：2025-03-08 22:50:43瀏覽次數：209次

聯系我時，請告知來自制藥網

產品分類 品牌分類

  破碎設備

鄂式破碎機

破碎機

  其他品牌

河南省瑞朗機械設備有限公司

經營模式：經銷商

商鋪產品：23條

所在地區：河南鄭州市

聯系人：李光斌

詢價 給他留言

產品簡介

操作方式	間歇式,連續式	出料粒度	≤10mm
粉碎方法	干法粉碎	進料粒度	≤150mm
生產能力	＞1000（Kg/h）	適用物料	藥物,食品,飼料,通用,其他
產地	國產	產品大小	小型
產品新舊	全新	粉碎程度	粗碎,細碎,粗碎
粉碎程度	粗碎,細碎,粗碎	結構類型	臥式
自動化程度	半自動	動力	11-15kw

小型錘式破碎機是由錘式破碎機箱體、轉子、錘頭、反擊襯板、篩板等組成。主要用于在水泥，化工，電力，冶金等工業部門破碎中等硬度的物料。由上殼體、下殼體、傳動部件、篩板部件等組成。

詳細介紹

小型錘式破碎機是由錘式破碎機箱體、轉子、錘頭、反擊襯板、篩板等組成。主要用于在水泥，化工，電力，冶金等工業部門破碎中等硬度的物料。

小型錘式破碎機由上殼體、下殼體、傳動部件、篩板部件等組成。

小型錘石制砂機適用于破碎抗壓強度180MPa以下的石灰石、煤矸石、石膏、頁巖等各類中硬脆性物料的粗、中、細碎作業。錘式破碎機是直接將粒度為600-1800毫米的物料破碎至25或25毫米以下的一段破碎用破碎機。

錘式碎石機適用于在水泥、化工、電力、冶金等工業部門破碎中等硬度的物料，如石灰石、爐渣、焦碳、煤等物料的中碎和細碎作業。單段錘式破碎機為重錘式破碎機，又叫復合錘式破碎機，主要用于石灰石的破碎作業，大型單段錘式破碎機可以將1米直徑的石灰?guī)r直接破碎到20mm左右，具有*的破碎能力。單段錘式破碎機在水泥行業具有大量的應用。

錘式破碎機主要是靠沖擊能來完成破碎物料作業的。錘式破碎機工作時，電機帶動轉子作高速旋轉，物料均勻的進入破碎機腔中，高速回轉的錘頭沖擊、剪切撕裂物料致物料被破碎，同時，物料自身的重力作用使物料從高速旋轉的錘頭沖向架體內擋板、篩條，在轉子下部，設有篩板、粉碎物料中小于篩孔尺寸的粒級通過篩板排出，大于篩孔尺寸的物料阻留在篩板上繼續受到錘子的打擊和研磨，直到破碎至所需出料粒度最后通過篩板排出機外。

Hammer crusher, Hammer crusher price, Crushing equipment product library - Henan Ruilang Machinery

A hammer crusher is composed of a hammer crusher housing, rotor, hammer head, impact lining plate, sieve plate, etc. Mainly used for crushing medium hardness materials in industrial sectors such as cement, chemical, power, metallurgy, etc.

The hammer crusher consists of an upper shell, a lower shell, transmission components, sieve plate components, etc.

The hammer crusher is suitable for crushing various types of medium hard and brittle materials such as limestone, coal gangue, gypsum, shale, etc. with compressive strength below 180MPa in coarse, medium, and fine crushing operations. A hammer crusher is a crushing machine used to directly crush materials with a maximum particle size of 600-1800 millimeters to 25 or less millimeters.

Hammer crushers are suitable for crushing medium hardness materials such as limestone, slag, coke, coal, etc. in industrial sectors such as cement, chemical, power, metallurgy, etc. The single-stage hammer crusher is a heavy hammer crusher, also known as a composite hammer crusher, mainly used for limestone crushing operations. Large single-stage hammer crushers can directly crush limestone with a diameter of 1 meter to about 20mm, with strong crushing capacity. Single stage hammer crushers have a wide range of applications in the cement industry.

Hammer crushers mainly rely on impact energy to complete material crushing operations. When the hammer crusher is in operation, the motor drives the rotor to rotate at high speed, and the material uniformly enters the crusher chamber. The high-speed rotating hammer head impacts, shears and tears the material, causing it to be crushed. At the same time, the gravity of the material itself causes the material to rush from the high-speed rotating hammer head to the baffle and screen strip inside the frame. At the lower part of the rotor, there is a sieve plate, and the particles smaller than the sieve hole size in the crushed material are discharged through the sieve plate. The materials larger than the sieve hole size are retained on the sieve plate and continue to be hit and ground by the hammer until they are crushed to the required discharge particle size and finally discharged outside the machine through the sieve plate.

關鍵詞：破碎機

其他推薦產品更多>>