FS1500系列立式超微粉碎機介紹（機型）

Introduction for FS1500 Series Vertical Ultra Micro Crusher (High end Model)

一、產品特點Product features

1、穩定可靠，廣泛適用于飼料、食品、化工、環保等行業；

Stable and reliable, widely used in feed, food, chemical, environmental protection and other industries;

2、粉碎原料的細度60-200目連續可調，可按照客戶要求達到特殊要求的超微粉碎；

The fineness of the crushed raw materials is continuously adjustable from 60 to 200 mesh, and can reach the ultra-fine pulverization can meet customers’ specialrequirements;

3、無篩式結構設計，不堵塞，粉碎、風力分級、再粉碎機同步完成；

There is no clogging, because of no sieve structure design. And crushing, wind classification, re-pulverizer can be completed synchronously;

4、配套的螺旋喂料器可自動排除比重較大的雜質，確保了設備安全運行；

The equipped screw feeder can automatically remove impurities with large specific gravity to ensure the safe and efficient operation;

5、粉碎盤結構，使原料粉碎細度均勻，產量高，粉碎原料溫升低；

Precise and unique crushing disc structure makes the raw material crushing fineness in uniform size and highoutput.Meanwhile, the temperature of the pulverized raw material is low;

6、主機傳動系統，運行平穩，軸承溫升低，無需加油，日常維護方便；

The host transmission system is advanced, the operation is stable, the bearing temperature rise is low, and no need to refuel, which makes the daily maintenance conveniently;

7、錘頭和齒圈選用合金材料焊接，提高了易損件的使用壽命，節約了使用成本；

The hammer head and gear ring are welded with high-quality alloy materials, which effectively improves the service life and reduces the cost;

8、配有專用消音器，大幅度降低設備運行噪聲；

Equipped with a special silencer to greatly reduce the operating noise of the equipment;

9、配備粉碎機自動負荷控制儀，根據主機電流，系統自動調整喂料頻率，可實現粉碎機自動運行。

Equipped with automatic load control device;According to the host current, the system could automatically adjusts the feeding frequency, which can realize the efficient automatic operation.

10、配備粉碎工段脈沖除塵差壓自動聲光報警，確保粉碎機工作效率。

Equipped with automatic acousto-optic alarm of pulse and dust removal by differential pressure, which ensures the working efficiency.

二、主要技術參數Main technical parameters

1、粉碎機主要技術參數（表1）Technical parameters (Table 1)

產量測定工況：一次粉碎40目過60%，水份13-14%

Yield measurement condition: a grinding 40 mesh over 60%, 13-14% moisture

2、粉碎機主要技術參數（表2）Technical parameters (Table 2)

產量測定工況：一次粉碎40目過60%，水份13-14%

Yield measurement condition: a grinding 40 mesh over 60%, 13-14% moisture

三、產品圖片 Product pictures

1、產品圖片（1） Picture 1

2、產品圖片（2）Picture 2

3、產品圖片（3）  Picture 3