主要特性與技術指標

以 2.5 GSa/s 采樣率和 14 位垂直分辨率生成 330 MHz 脈沖和 500 MHz 函數/任意波形；

用于高斯白噪聲的可選波峰因數幫助工程師確定極限測試中應用到器件上的失真量，以便符合各種串行總線的標準；

無毛刺定時參數變化支持工程師在不需要漏失信號或毛刺信號的條件下改變頻率，并能實現連續工作，而無需重啟或重置被測件；

任意比型使用簡單的碼型設置顯示通道電容負載。測試設計極限不再需要復雜的測量設置步驟。

330 MHz 脈沖、500 MHz 正弦波、660 Mbit 碼型

Main features and technical indicators

330mhz pulse and 500mhz function/arbitrary waveform were generated by 2.5gsa /s sampling rate and 14-bit vertical resolution.

The optional crest factor for gaussian white noise helps engineers determine the amount of distortion applied to the device in the limit test to meet various serial bus standards.

The change of timing parameters without burr supports the engineer to change the frequency under the condition that no leakage signal or burr signal is needed, and can achieve continuous work without restarting or resetting the tested part;

Any bit code type USES a simple code type setting to display the channel capacitance load. Test design limits no longer require complex measurement setup steps.

330 MHz pulse, 500 MHz sine wave, 660 Mbit code type