主要特性與技術指標

每個探頭包括 4 個通道

每個通道均可定制映射（方向和通道數）

焊入式可更換 ZIF 探針

可選外部參考時鐘信號源電纜

低電容性負載

支持 PCIe 2.5 Gb/s、 5.0 Gb/s 和 8.0 Gb/s

一（1）個探頭支持 x1 和 x2 通道寬度（單向和雙向）或 x4 通道寬度（單向）

工作溫度為 0 °C 至 +55 °C

描述

U4324A 飛線探頭是一款適用于 U4301A PCIe Gen3 協議分析儀模塊的是德探測解決方案。每個飛線探頭一端包括 5 條電纜，另一端具有一個適配夾，5 條電纜中有 4 條用于捕獲 PCI Express 差分信號，剩下 1 條用于將探頭連接到被測件上的可選外部參考時鐘。適配夾可插入到 U4301A PCIe3 協議分析儀的端口中。4 條信號電纜都能夠插入到可更換的 N5426A ZIF（零插入力）探針中，探針將焊入被測件通道上。參考時鐘電纜要求將 3 排針固定到被測件參考時鐘輸出源。該 3 排針與用于連接 U4322A 中心總線 3.0 探頭上的可選外部參考時鐘相同。

Main Characteristics and Technical Indicators

Each probe consists of four channels

Each channel can fully customize the mapping (direction and number of channels)

Welded-in Replaceable ZIF Probe

Optional external reference clock signal source cable

Low Capacitive Load

Support PCIe 2.5 Gb/s, 5.0 Gb/s and 8.0 Gb/s

One (1) probe supports x 1 and X2 channel widths (unidirectional and bidirectional) or X4 channel widths (unidirectional)

Working temperature is from 0 C to + 55 C

describe

U4324A flying wire probe is a German detection solution for U4301A PCIe Gen3 protocol analyzer module. Each fly-wire probe consists of five cables at one end and an adapter clamp at the other end. Four of the five cables are used to capture PCI Express differential signals, and the remaining one is used to connect the probe to an optional external reference clock on the tested piece. The adapter clip can be inserted into the port of U4301A PCIe3 protocol analyzer. All four signal cables can be inserted into the replaceable N5426A ZIF (zero insertion force) probe, which will be welded into the channel of the tested piece. The reference clock cable requires three rows of pins to be fixed to the reference clock output source of the measured piece. The three-row needle is the same as the optional external reference clock used to connect the probe of U4322A central bus 3.0.