主要性能指標

• 兼容 6 系列 MSO、5 系列 MSO、MSO/DPO3000、MDO/DPO4000、MSO/DPO5000、DPO7000 和 DPO700001示波器

• 帶寬：2

• TPR1000：10 kHz ~ 1 GHz

• TPR4000：10 kHz ~ 4 GHz

• TPR1000：DC ~ 1 GHz

• TPR4000：DC ~ 4 GHz

• DC 耦合模式：

• DC 抑制模式：

• 動態范圍： 60 V DC，1Vp-p AC 3

• 衰減：1.25x2

• 測量準確度：

• DC 線性度：<0.1%

• DC 偏置漂移：±100 μV

• 步進響應長期畸變：±1%

• 噪聲：

• 6 系列 MSO 上 <300 μVp-p 噪聲（20 MHz 帶寬棚限）

• 6 系列 MSO 上 <1 mVp-p 噪聲（全部帶寬）

• 輸入阻抗：

• 50 kΩ DC ~ 10 kHz

• 50 Ω AC > 100 kHz

• 的溫度范圍：4

• –40 ~ +85 °C（標配附件）

• –40 ~ +155 °C（高溫電纜選項）

• 偏置：

• ±60 V 偏置范圍

• 偏置設置誤差：±2 mV 值，±0.4 μV 典型值

1DPO70000 示波器要求選配 TCA-VPI50 轉接頭。

2頻響是為 <1W 源阻抗優化的。

3 AC RMS 為 1 V。

4補償盒和示波器溫度范圍限于 0 ~ +55℃。

應用

• 探測汽車、工業和消費市場中芯片組的電源軌電壓供電和控制功能

• 探測數字功率管理、內存和以太網連接能力

• 探測高頻電源軌上的噪聲源

為什么使用電源軌探頭？

現代電子產品新增的功能、更高的密度、更快的開關速度，正推動著對更低的供電電壓的需求。設計人員需要放大電源軌，查找高頻干擾信號，測量紋波，在更緊張的容限下分析耦合效應。示波器通常沒有足夠的偏置，把 DC 軌上的噪聲和紋波位移到屏幕中心，來進行所需的測量。

TPR1000 和 TPR4000 探頭提供了低噪聲測量解決方案（示波器和探頭），這一點非常關鍵，以區分示波器和探頭的噪聲與被測的 DC 電源的噪聲和紋波。探頭中較高的輸入阻抗，可以限度地減少示波器負載對 DC 軌道的影響 (50 kΩ @ DC)。探頭提供的帶寬越高，能夠查看 DC 軌道上可能影響的數據信號、時鐘等信號的內容（諧波、更快的紋波等）就越多。

TPR1000 和 TPR4000 為高速 (μP)、低功率（手機）和開關式電源市場中的功率完整性和驗證工程師提供了同類秀的完整性解決方案。探頭設計提供了的噪聲、高帶寬及 60 V 偏置，擁有靈活的連接選項，可以解決客戶挑戰，同時有多個軟件包，能夠滿足數字功率管理市場的需求。

Key performance indicators

Compatible with 6 series MSO, 5 series MSO, MSO/DPO3000, MDO/DPO4000, MSO/DPO5000, DPO7000 and DPO700001 oscilloscopes

Bandwidth: 2

DC coupling mode:

TPR1000: DC ~ 1 GHz

TPR4000: DC ~ 4 GHz

DC suppression mode:

TPR1000:10 kHz ~ 1 GHz

TPR4000:10 kHz ~ 4 GHz

Dynamic range: up to 60 V DC, 1Vp-p AC 3

Attenuation: 1.25 x2

Measurement accuracy:

DC linearity: <0.1%

DC offset drift: 100 V

Step response long-term distortion: 1%

Noise:

<300 vp-p noise (20 MHz bandwidth bａnd limit) on 6 series MSO

Mvp-p noise on 6 series MSO <1 (total bandwidth)

Input impedance:

50 k Ω DC ~ 10 kHz

50 Ω AC > 100 kHz

Tip temperature range: 4

- 40 ~ + 85 ° C (with attachments)

- 40 ~ + 155 ° C (high temperature cable options)

Offset:

60 V offset range

Bias setting error: 2 mV maximum value, 0.4 V typical value

1DPO70000 oscilloscope requires optional TCA-VPI50 adapter.

The frequency response is optimized for <1W source impedance.

The maximum AC RMS is 1 V.

4 compensation box and oscilloscope temperature range was limited to 0 ~ + 55 ℃.

application

Detect chipset power supply, rail voltage supply and control functions in automotive, industrial and consumer markets

Probe digital power management, memory, and Ethernet connectivity capabilities

Detect noise sources on high frequency power rails

Why use a power rail probe?

New features, higher densities and faster switching speeds in modern electronics are driving demａnd for lower power supplies. The designer needs to amplify the power track, find high frequency interference signals, measure ripples, and analyze the coupling effect under more intense tolerances. An oscilloscope usually does not have enough bias to shift the noise and ripple on the DC track to the center of the screen to make the required measurements.

The TPR1000 and TPR4000 probes provide a low noise measurement solution (oscilloscope and probe), which is critical to distinguish the noise of the oscilloscope and probe from the noise and ripple of the DC power supply under test. Probe of high input impedance, can minimize the oscilloscope load impact on DC rail (50 k Ω @ DC). The higher the bandwidth provided by the probe, the more content (harmonics, faster ripples, etc.

The TPR1000 and TPR4000 provide the best integrity solutions of their kind to power integrity and verification engineers in the high speed (P), low power () and switching power markets. The probe design offers minimum noise, high bandwidth and 60 V offset, flexible connectivity options to address customer challenges, and multiple software packages to meet the needs of the digital power management market.