Tektronix TIVM和TIVH系列IsoVu™測量系統提供電流隔離測量解決方案，在存在大的共模電壓的情況下，精確地解決高帶寬、差分信號高達±2500 V的問題，其帶寬的共模抑制性能在同類產品中是。

特性和好處

從直流到1ghz的帶寬

1億到1(160分貝)共模抑制從直流高達1兆赫

1 GHz下10,000到1 (80 dB)的共模抑制

60kv峰值共模電壓

±2500 V差速器(直流+ pk交流)

高達±2500 V的偏移范圍

輸出鎖模

安全認證

直流和交流輸入耦合

應用程序

半/全橋設計使用甘，碳化硅，IGBTs

浮動測量

電源轉換器設計

電源設備評估

開關電源設計

逆變器設計

電機驅動設計

電子鎮流器的設計

EMI

防靜電

電流分流器測量

遠程探測能力

產品描述

TIVM和TIVH系列(IsoVu)產品可以用在大多數帶有TekVPI接口的Tektronix示波器上，也可以用在帶有TCA-VPI50適配器的MSO/DPO70K系列示波器上。IsoVu采用電光傳感器，將傳感器端部電纜的電信號轉換為光學信號，將待測設備與示波器電隔離。IsoVu包括四個獨立的激光器，一個光學傳感器，五個光纖，以及復雜的反饋和控制技術。傳感器頭連接到測試點，具有的電氣隔離，并通過其中一根光纖供電(不需要電池)。IsoVu是用戶進行以下測量的理想解決方案:

在下列情況下的差分測量:

需要電隔離

高共模電壓

高頻共模干擾

高頻率測量

在高EMI環境下的測量

EMI遵從性測試

防靜電測試

The Tektronix TIVM and TIVH Series IsoVu™ Measurement Systems offer galvanically isolated measurement solutions for accurately resolving high bandwidth, differential signals up to ±2500 V in the presence of large common mode voltages with the best in class common mode rejection performance across its bandwidth.

Features and benefits

• Bandwidths from DC to 1 GHz

• 100 Million to 1 (160 dB) Common Mode Rejection from DC up to 1 MHz

• 10,000 to 1 (80 dB) Common Mode Rejection at 1 GHz

• 60 kV peak Common Mode Voltage

• Up to ±2500 V Differential (DC + pk AC)

• Up to ±2500 V offset range

• Output clamping

• Safety certified

• DC and AC input coupling

Applications

• Half/Full Bridge designs using GaN, SiC, IGBTs

• Floating measurements

• Power Converter design

• Power Device evaluation

• Switching Power Supply design

• Inverter design

• Motor Drive design

• Electronic Ballast design

• EMI

• ESD

• Current shunt measurements

• Remote probing capability

Product Description

The TIVM and TIVH Series (IsoVu) products can be used on most Tektronix oscilloscopes with the TekVPI interface and on MSO/DPO70K series oscilloscopes with the TCA-VPI50 adapter. IsoVu utilizes an electro-optic sensor that converts the electrical signal from the sensor tip cables to an optical signal, which electrically isolates the device-under-test from the oscilloscope. IsoVu incorporates four separate lasers, an optical sensor, five optical fibers, and sophisticated feedback and control techniques. The sensor head, which connects to the test point, has complete electrical isolation and is powered over one of the optical fibers (No batteries required). IsoVu is an ideal solution for users making the following measurements:

• Differential measurements in the following conditions:

• Complete galvanic isolation is required

• High common mode voltage

• High frequency common mode interference

• High frequency measurements

• Measurements in high EMI environments

• EMI compliance testing

• ESD testing

•