A600系列電流探針是專門設計的，以支持使用TekMeter或示波器進行測量。

特點和效益：

A621

AC ：5Hz至50kHz

100mA至2000A

A622

AC/DC至100kHz

50mA至100A

用于DMMS和示波器

A621 2000 Amp交流電流探頭/BNC

這種工業式夾緊探頭有一個BNC連接器，可以與一個覆蓋香蕉插頭適配器1，所以它可以用于數字萬用表，TekMeter，和示波器。A621可以測量100mA到2000A峰值的交流電流，頻率范圍為5Hz~50kHz。它提供了一個1mV, 10mV, 100mV輸出每安培測量。

A622 100Amp交流電流探頭/BNC

這種“長鼻子"式鉗位探頭使用霍爾效應電流傳感器向示波器提供電壓輸出。它有一個BNC連接器，可以與一個裹包香蕉插頭適配器1，所以它也可以用于數字萬用表，TekMeter，和示波器。A622可以測量在直流到100 kHz頻率范圍內的50 mA到100 A峰值的AC/DC電流。它提供10mV, 100mV輸出每安培測量。

The A600 Series current probes are specifically designed to support measurements with the TekMeter® or oscilloscope.

Features and benefits

A621：

AC–5Hz to 50kHz

100mA to 2000A peak

For DMMs and oscilloscopes

Clamp on

A622：

AC/DC – 100kHz

50mA to 100A peak

For DMMs and oscilloscopes

Applications

Motor drives

Inverters

Power supplies

Avionics

A621 2000 Amp AC Current probe/BNC

This industrial-style clamp-on probe has a BNC connector and can be used with a shrouded banana plug adapter 1 so it can be used on digital multimeters, TekMeter, and oscilloscopes. The A621 can measure AC currents from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.

A622 100 Amp AC DC Current probe/BNC

This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and can be used with a shrouded banana plug adapter 1 so it can also be used on digital multimeters, TekMeter, and oscilloscopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.

Recommended products

TPS2000, TDS1000B, TDS2000C, and TDS3000C Series oscilloscopes and DMM4020 1, DMM4040 1, and DMM4050 1digital multimeters.