久色视频官网,婷啪精品在线播放,日韩黄色视频999

參考價	面議

產品簡介

TCP305A探頭，AC/DC電流，DC到50MHz，50A DC(要求 TCPA300放大器)

詳細介紹

－TCPA300
－TCP312
－TCP305
－TCP303

－TCPA400
－TCP404XL

	TCP312 W/TCPA 300	TCP312	TCP305 W/TCPA 300	CT4 TCP305	TCP303 TW/CPA300	TCP404XL w/TCPA400
針對TEKPROBE, TekConnect和標準確50??/1 M?? BN 示波器系統的TCP300或TCP400系列產品，需用TCPA300或TCPA400放大器。
帶寬 Hz到MHz	DC到100	0.5到20	DC到50	0.5到20	DC到15	DC到2
峰值脈沖	50A	20kA*62	50A	20kA*62	150A	750A
ACp-p	60A	2kA*63	100A	2kA*63	424A	1414A
降至低于	N/A	50Hz	N/A	50Hz	N/A	N/A
降至高于	50KHz 30A-10A/V	1.2 KHz	2KHz	1.2 KHz	1KHz	1.8KHz
DC	50A-1A/V	20A	25A-A/V 50A-10A/V	20A	25-5A/V 150-50A/V	750A*6 5-1A/mV 500A-A/mV
Amp-s 產品	50A6μS-1A/V 500A6 μS-10A/V	0.5A*1S	500A* 6μS-5A/V NA-10A/V	5A*6Styp	3,000A6μS-5A/V 15,000A6 μS-50A/V	NA-1A/mV
電流/格顯示范圍	1A/V 10A/V	20 A/V 10kA/V	5A/V 10A/V	100A/V 10kA/V	5A/V 50A/V	1A/mV
上升時間	≤3.5 ns	<17.5 ns	≤7ns	<17.5 ns	≤23ns	≤175 ns
插入阻抗@1MHz	0.08??	2.5m??	0.035??	1.1m??	0.01??	0.1m??
裸線電壓	僅絕緣線	3kV	僅絕緣線	3kV	600VRMSCATI&II 300VRMSCATIII	600VRMSCATI&II 300VRMSCATIII
導線直徑	3.8 mm	38 mm	3.8 mm	38mm	21mmx25 mm	21mmx25mm
電纜長度	1.5 m	1.5 m	1.5 m	1.5 m	2m	8m

*1需要Magie
*6額定值隨占空比和頻率下降

提高性和簡單性
TCP300和TCP400系列AC/DC電流測量系列為滿足當前的電流測量需求提供了非常的系統。分芯探頭同時采用變壓器和霍爾效應技術，提供了從DC直到100MHz的寬帶寬測量功能，支持1毫安、幾千安(在使用CT4電流變壓器時)的電流。在連接到帶有TEKPROBE Ⅱ或TekConnect接口的泰克示波器上時，可以簡單、方便地完成電流測量和計算。
通過TDS2PWR2功率測量等附加軟件，可以提供額外的測量能力。借助這些測量能力，電流測量變得的簡便。
滿足當前的AC/DC電流測量應用需求
TCPA300放大器在與TCP312、TCP305或TCP303探頭一起使用時，提供了廣泛的電流測量功能，低電平毫安測量與超高電流電平之間的空白。這三種探頭提供30A、50A和150A的連續DC電流測量功能。對更高的電流電平，帶有TCP404XL電流探頭的TCPA400放大器可以測量500A的連續DC電流和750A的連續DC電流，但其額定值會隨著占空比下降。
帶有TCPA300的TCP312實現了頻率更高的性能，它提供了超過100MHz的帶寬和30A DC的電流。
測量誤差和手動計算一去不復返
通過這一系列新的電流測量工具，我們?yōu)樘┛薚DS3000，TDS500，TDS600，TDS700，TDS5000，TDS6000和TDS7000B系列示波器系統的用戶提供了自動控制及屏幕標度和單位。TDS系列示波器提供了屏幕上標度和單位。狀態LED迅速顯示TCP300/400系列的工作狀態及可能在過去導致測量誤差的潛在錯誤條件。
TCP300/TCP400電流測量系統無縫地與TDS系列示波器和TDSPWR2軟件包集成起來，可以為您完成這些耗時的功率測量和計算工作。
通過把示波器上測得的輸出電壓乘以TCAP300/400系列量程設計值，即使非TEKPROBE系統也可以使用TCPA300/TCPA400系列進行適當?shù)碾娏鳒y(cè)量。
?特點
AC/DC測量功能
DC-100MHz，電流探頭放大器(TCPA300)使用：
—DC - 100MHz，30 A DC(TCP312)
—DC - 50MHz，50 A DC(TCP305)
—DC - 15MHz，150 A DC(TCP303)
DC-50MHz，電流探頭放大器(TCPA400)使用：
—DC - 2MHz，750*1A DC(TCP404XL)(500A DC連續電流)
自動定標和單位*2- 示波器屏幕上的幅度和單位讀數減少了測量錯誤，無需更多的手動計算
AC/CE輸入耦合
低插入阻抗，降低了被測器件的負荷
小型機械包裝 - 減少占用的桌面空間，貯存和處理更容易
分芯結構，可以簡便地連接電路
狀態指示燈，以可視方式表示工作狀態，通知潛在的錯誤條件
降低了DC漂移和噪聲，改善低電平電流測量
經過認證，可以用于美國、加拿大和歐洲。符合相應的IEC標準。
?應用
為電信、數據通信、計算機和半導體功率電子器件環境中的設計人員、安裝人員和維護人員提供開發和分析解決方案：
— 電源(開關式和線性)
— 半導體器件(SCRs,IGBTs,MOSFETs,CMOS,BJTs)
— 逆電器/變壓器
— 電子鎮流器
— 工控/消費電子
— 移動通信(電話、衛星、直放站)
— 發動機驅動裝置
— 交通運輸系統(電動車輛、電動火車、機車、航空電子設備)

TCP312
探頭，AC/DC電流，DC到100MHz，30A DC(要求 TCPA300放大器)。
TCP305
探頭，AC/DC電流，DC到50MHz，50A DC(要求 TCPA300放大器)。
TCP303
探頭，AC/DC電流，DC到15MHz，150A DC(要求 TCPA300放大器)。
TCP404XL
探頭，AC/DC電流，DC到2MHz，500A DC(750A DC,額定值隨占空比下降)(要求 TCPA400放大器)。
TCPA300
放大器，AC/DC電流探頭，DC到100MHz(要求TCP305或TCP312或TCP303探頭)。
TCPA400
放大器，AC/DC電流探頭，DC到50MHz(要求TCP404XL探頭)。

Improve sex and simplicity

TCP300 and TCP400 series AC/DC current measurement series provide very advanced systems to meet current measurement requirements. Points core probe with transformer and hall effect technology at the same time, provides from DC to 100 MHZ wide bandwidth measurement function, support the minimum 1 ma, highest thousands of Ann (when using CT4 current transformer) current. In the connection to the with TEKPROBE Ⅱ or TekConnect interface teck oscilloscope, it is simple and convenient to complete the current measurement and calculation.

Additional measurement capability can be provided through additional software such as TDS2PWR2 power measurement. With these measurements, current measurements have become ever easier.

Meet the current AC/DC current measurement application requirements

When used with TCP312, TCP305 or TCP303 probes, the TCPA300 amplifier provides a wide range of current measurement functions and fills the gap between low level milliampere measurement and high current level. These three probes provide continuous DC current measurement functions of 30A, 50A and 150A. For higher current levels, the TCPA400 amplifier with the TCP404XL current probe can measure the continuous DC current of 500A and the continuous DC current of 750A, but its rating will decrease with the duty ratio.

TCP312 with TCPA300 achieves higher frequency performance, providing more than 100MHz bandwidth and the maximum current of 30A DC

Measurement errors and manual calculations are gone

Through this new series of current measuring tools, we provide automatic control and screen scale and unit for teak TDS3000, TDS500, TDS600, TDS700, TDS5000, TDS6000 and TDS7000B series oscillograph system users. TDS series oscilloscopes provide on-screen scale and units. Status leds quickly display the working status of the tcp300/400 series and potential error conditions that may have caused measurement errors in the past.

The TCP300/TCP400 current measurement system integrates seamlessly with the TDS series oscilloscopes and TDSPWR2 software packages to complete these time-consuming power measurements and calculations for you.

By multiplying the output voltage measured on the oscilloscope by the tcap300/400 series range design value, even non-tekprobe systems can use the TCPA300/TCPA400 series for appropriate current measurement.

characteristics

AC/DC measuring function

Dc-100mhz, current probe amplifier (TCPA300)

-- dc-100mhz, 30a DC(TCP312)

-- dc-50mhz, 50a DC(TCP305)

-- dc-15mhz, 150a DC(TCP303)

Dc-50mhz, current probe amplifier (TCPA400)

-- dc-2mhz, 750*1A DC(TCP404XL)(500A DC continuous current)

Automatic calibration and unit *2- the range and unit readings on the oscilloscope screen reduce measurement errors and require no more manual calculations

AC/CE input coupling

Low insertion impedance reduces the load of the device under test

Small mechanical packaging - less desktop space, easier storage and handling

Split - core structure, can easily connect the circuit

Status indicator light, which visually indicates working status, notifies potential error conditions

DC drift and noise are reduced and low level current measurement is improved

Certified for use in the United States, Canada and Europe. Comply with the corresponding IEC standards.

application

Develop and analyze solutions for designers, installers, and maintenance personnel in telecommunications, data communications, computers, and semiconductor power electronics environments:

- power supply (switching and linear)

Semiconductor devices (SCRs, IGBTs, MOSFETs on-resistance will, CMOS, BJTs)

-- inverter/transformer

-- electronic ballasts

-- industrial control/consumer electronics

-- communication (telephone, satellite, direct broadcasting station)

- engine drive

-- transportation system (electric vehicles, electric trains, locomotives, avionics)