在電線絕緣層上迅速觀測信號
打破電工裝備的常規的金屬非接觸式探頭

● 只要夾住電線絕緣層即可將電裝信號可視化，可用于示波器觀測波形
● 汽車電氣系統信號的測量、LIN信號等通訊信號的捕捉
● 可用于以下用途：
由于設備的太小、使用防水連接器，無法接觸金屬端子時
為了減少重復連接，不想拔出連接器時
存在靜電引起傳感器故障的危險性，不能破壞絕緣層時

【測量線路主機】AC非接觸式電壓探頭SP3000（精度保證時間1年，調整后精度保證時間1年）

【前端部分】AC電壓探頭SP9001

Quickly observe the signal on the wire insulation

Metal non - contact probes that break the convention of electrical equipment

As long as the wire insulation layer clamped can be used to visualize the electrical signal, oscilloscope can be used to observe the waveform

Auto electrical system signal measurement, LIN signal and other communication signal capture

Can be used for the following purposes:

Because the equipment is too small, use waterproof connector, unable to contact the metal terminal

To reduce repeated connections, do not want to pull out the connector

There is a risk of sensor failure caused by static electricity when the insulation layer cannot be destroyed