為了追求功率轉換效率，高精度、12ch的功率分析儀

● 功率基本精度±0.05％※1 （※1僅指主機精度，但即使加上電流傳感器精度也可達到±0.075%）

● 抗干擾性強且高穩定性（80dB/100kHz的CMRR, ±0.01%/℃的溫度特性）

● 還能準確測量變化大的負載，TrueHD 18bit

● 在保證精度的同時達到10ms的更新率（通過專用IC所有測量都是獨立并同時運算）

● 對于準確且穩定的效率測量很重要的一點：DC基本精度±0.07%

● 和以往機型相比擴大至10倍的寬頻帶和采樣率

● 12ch※2，實時連接2臺的同步功能

　※2 6ch機型使用光連接線（最長500m）連接2臺，可以同步數據和波形。

● 無需示波器的波形分析，馬達分析專用觸發

● 帶寬1.5MHz，100次的寬頻諧波分析

● 可以用于無線充電評價系統TS2400

基本參數

In pursuit of power conversion efficiency, power analyzer is a high-precision, maximum 12ch power analyzer

Power basic accuracy 0.05% 1 (※1 only refers to the host accuracy, but even with the addition of current sensor accuracy can reach 0.075%)

Low anti-jamming strong and high stability (80 db / 100 KHZ CMRR, plus or minus 0.01% / ℃ temperature characteristic)

Can also accurately measure large changes in the load, TrueHD 18bit

Update rate of 10ms at the same time to ensure the highest accuracy (all measurements are independent and simultaneously calculated through the dedicated IC)

For accurate and stable efficiency measurement is very important: DC basic accuracy 0.07%

10 times the broadbａnd and sampling rate compared with previous models

Maximum 12ch※2, real-time connection of two synchronization functions

※2 6ch model USES optical connection wire (maximum 500m) to connect 2 sets, which can synchronize data and waveform.

No oscilloscope waveform analysis, motor analysis special trigger

Bandwidth 1.5mhz, maximum 100 broadbａnd harmonic analysis

Can be used for wireless charging evaluation system TS2400