深夜视频一区二区,9999这里有精品

參考價	面議

產品簡介

雙錐高濃除渣機是紙漿凈化的設備，它利用纖維與雜質比重不同而使重雜質從紙漿中分離出來，達到凈化紙漿的目的

詳細介紹

雙錐高濃除渣機是紙漿凈化的設備，它利用纖維與雜質比重不同而使重雜質從紙漿中分離出來，達到凈化紙漿的目的。該設備使用范圍廣，既可用于高能度紙漿的粗選凈化，亦可用于紙機前對低濃紙漿進行精選凈化。既可用于化學漿、半化學漿的生產，又可用于機械漿廢紙漿的生產，廣泛應用于箱板紙、瓦楞紙、文化紙、新聞紙、衛生紙的生產中，尤其是凈化廢紙漿、半化學法草漿效果更佳。

雙錐高濃除渣機結構簡單，占地面積小，生產能力大，操作方便，不堵塞排渣口，凈化效率高，漿料僅一次通過除砂器，不需尾漿處理設備，纖維流失為零，錐體耐磨，使用壽命長，沒有傳動，不需要?jiǎng)恿⑵浒惭b在漿料輸送過程中，即可達到除渣效果。

雙錐高濃除渣機不需特殊維護，生產中只要保證各閥門動作靈活，不漏水，各處壓力穩定、正常，即可保證除渣效果。在檢修時應隨時檢查上錐體內表面的磨損情況，必要時更換上錐體。

Double cone high consistency slag remover is an advanced equipment for pulp purification. It uses different proportion of fibers and impurities to separate heavy impurities from pulp, so as to purify pulp. The equipment has a wide range of applications. It can be used not only for the roughing and purification of high energy pulp, but also for the cleaning and purification of low consistency pulp in front of the paper machine. It can be used not only in the production of chemical pulp and semi-chemical pulp, but also in the production of mechanical pulp waste pulp. It is widely used in the production of box board, corrugated paper, cultural paper, newsprint and toilet paper, especially in the purification of waste pulp and semi-chemical straw pulp.

Double-cone high concentration slag remover has simple structure, small occupation area, large production capacity, easy operation, no blockage of slag outlet, high purification efficiency, pulp only once through the desander, no tail pulp treatment equipment, zero fiber loss, wear-resistant cone, long service life, no transmission. The slag removal effect can be achieved in the process with no power to install in pulp transportation.

The double cone high concentration slag remover does not need special maintenance. In production, the slag removal effect can be guaranteed as long as the valves are flexible, no leakage, and the pressure is stable and normal everywhere. During the overhaul, the surface wear of the upper cone should be checked at any time, and the upper cone should be replaced if necessary.