設備尺寸

Equipment Dims(cm)

245*245*300

400*400*370

500*500*450

635*635*635

幾何學 Geometry

底部出水口采用的角度設計方便排水 The bottom outlet is designed with   lowest angle to facilitate drainage.

材質 Material

整體采用SS304不銹鋼 overall SS304 stainless steel

表面拋光度

Surface finish

Ra 0.8µm

腳輪 Caster

colson聚氨酷腳輪 colson PU caster

重量（空載）

Weight (no load)

60kg

90 kg

120 kg

150 kg

攪拌袋安裝

Mixing bag installation

側面采用操作門設計，方便袋子取出和安裝

Side door design for easy bag removal and   installation.

攪拌

Mixing

設計：磁力耦合形式、HM!人機交互界面可導出數據 (CSV格式）

Design: magnetic coupling   form, Human-Computer interface data output ability (CSV form)

稱重平臺

Weighing   platform

設計：三點式稱重模塊安裝

Design: Three-point weighing module installation

在線PH

Online PH

設計：實時監測料液pH , 數據可以集成在工控機上

Design: real-time monitoring liquid PH, data integration   on IPC

在線電導率

Online   conductivity

設計：實時監測籵液電導率，數據可以集成在工控機上

Design: real-time monitoring liquid conductivity, data   integration on IPC

在線溶氧

Online oxygen dissolution

設計：實時監測料液DO, 數據可以集成在工控機上

Design: real-time monitoring liquid oxygen dissolution,   data integration on IPC

在線溫度

Online temperature

設計：實時監測料液溫度，數據可以集成在工控機上

Design: real-time monitoring liquid temperature, data   integration on IPC

三級權限

Three-level   permission

設計：實現權限配制、審計追蹤、數據PDF輸出

Design: realize permission distribution, audit trail,   data PDF output

針式打印

Stylus   printer

設計：采用針式打印，可實時打印操作數據等相關信息

Design: Stylus printer used, possibility of operating   parameters real-time printing

溫控夾套

Temperature   control jacket

可選配TCU溫度控制單元 TCU temperature   control unit optional

夾套設計

Jacket   design

側面和底面導流板式夾套，聚氨酯保溫層防止大量冷凝水出現

Side and bottom   deflector jackets, polyurethane coating to prevent condensation

夾套體積 Jacket volume

     18L                 /                     25L                /                     36 L

設計工作壓力／試驗壓力Design working pressure/test pressure

 0.69/0.88MPa, 6.9/8.8Sbar, 100/130psi

夾套進出水口

Jacket   inlet/outlet

下進上出 (TC5O卡盤標配），可選自鎖接頭

Bottom inlet and top outlet   (TC50 chunk standard configuration), self-locking joint optional.