衛生級管道視鏡 四通視鏡 Sanitary pipe sight glass

用途：視鏡可用于溫度高，腐蝕性強、易中毒、危險性較大，易結晶的化工塔器中，以保證其安全生產。

1清潔處理。

在使用前可以用適量酒精棉在其表面輕微擦拭，注意：不要用含有酸性   的液體進行清潔，以免腐蝕玻璃外表面。

2要正確選擇墊片。

環境工作溫度在280度以內的場合，用石棉墊或四氟墊即可，當環境工作溫度超出500℃時，建議選擇石墨墊片。注意：玻璃越厚，所以選擇的墊片厚度也要跟著相應增加。

3用力均勻。

安裝時不可用力過猛、過大，建議均勻用力按對角線方式鎖緊螺絲。

4定期檢查。

視鏡玻璃在安裝完畢后，還必須做好定期檢查工作，特別是在含有酸、堿的液體環境中，更是要做好定期檢查玻璃表面受腐蝕程度，以確保一線操作人員的安全。

Sanitary pipe sight glass

Uses: Mirrors can be used in high temperature, corrosive, easily poisoned, dangerous, easy to crystallize chemical tower in order to ensure its safe production.

1 cleaning process.

Before use, it can be slightly wiped with alcohol cotton on its surface. Caution: Do not use acidic liquid to clean the outer surface of the glass.

2 Select the gasket correctly.

Ambient temperature of 280 degrees or less occasions, asbestos or PTFE pad can be, when the ambient temperature exceeds 500 ℃, the proposed choice of graphite gaskets. Note: The thicker the glass, the thickness of the gasket should be chosen accordingly.

3 force evenly.

Installation can not force too much, too large, it is recommended that the uniform force diagonal locking screw.

4 regular inspection.

Mirror glass after installation is completed, but also must be regularly checked, especially in the liquid environment containing acid and alkali, but also to do a regular inspection of the surface of the glass by the corrosion level to ensure the safety of front-line operators.