當前位置：常州市森茂機械設備有限公司>>干燥機系列>>閃蒸干燥機>>XSG 系列快速旋轉閃蒸干燥機

XSG 系列快速旋轉閃蒸干燥機

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地常州市

在線詢價收藏產品

聯系方式：湯先生查看聯系方式

更新時間：2022-02-22 15:50:44瀏覽次數：700次

聯系我時，請告知來自制藥網

產品分類 品牌分類

暫無信息

常州市森茂機械設備有限公司

經營模式：生產廠家

商鋪產品：47條

所在地區：江蘇常州市

聯系人：湯先生（技術銷售總監）

詢價 給他留言

產品簡介

XSG 系列快速旋轉閃蒸干燥機：熱空氣切線進入干燥器底部，在攪拌器帶動下形成強有力的旋轉風場。膏狀物料由螺旋加料器進入干燥器內，在高速旋轉攪拌槳的強烈作用下，物料受撞擊、磨擦及剪切力的作用下得到分散，塊狀物料迅速粉碎，與熱空氣充分接觸、受熱、干燥。

詳細介紹

XSG 系列快速旋轉閃蒸干燥機

◆熱空氣切線進入干燥器底部，在攪拌器帶動下形成強有力的旋轉風場。膏狀物料由螺旋加料器進入干燥器內，在高速旋轉攪拌槳的強烈作用下，物料受撞擊、磨擦及剪切力的作用下得到分散，塊狀物料迅速粉碎，與熱空氣充分接觸、受熱、干燥。脫水后的干物料隨熱氣流上升，分級環將大顆粒截留，小顆粒從環中心排出干燥器外，由旋風分離器和除塵器回收，未干透或大塊物料受離心力作用甩向器壁，重新落到底部被粉碎干燥。

◆The hot air enters into the bottom of the dryer in tangent direction.Under the driving of the stirrer, a powerful rotating wind area is formed.The paste state materials enter into the dryer through the screwcharger. Under the powerful effect of stirring at high-speed rotation,the materials are distributed under the function of strike, friction andshearing force. The block state materials will soon be smashed andcontact the hot air fully and the materials are heated and dried. Thedried materials after the de-watering will go up with the hot-air flow.The grading rings will stop and keep the big particles. Small particleswill be discharged out of the dryer from the ring center and will becollected in the cyclone and dust collector. The not-fully-dried or bigpiece materials will be sent to the wall of the equipment by centrifugalforce and be smashed again after they fall down to the bottom.

XSG 系列快速旋轉閃蒸干燥機特點

◆旋流、流化、噴動及粉碎分級技術的有機結合。

◆設備緊湊，體積小，生產效率高，連續生產，實現了“小設備、大生產”。

◆干燥強度大，能耗低，熱效率高。

◆物料停留時間短，成品質量好，可用于熱敏性物料干燥。

◆負壓或微負壓操作，密閉性好，效率高，消除環境污染。

◆This machine combines the whirl technology with the fluidity, ejection and smashing step technologies.

◆The equipment is compact and small in size, high in production efficiency and continuous in the production. It has realizedthat " small equipment can perform the large production".

◆The drying capacity for thismachine is big but its energy consumption is low. Its heat efficiency is high.

◆The material stay time is very short. The quality of the final products is very good. The machine can be used for drying theheat sensitive materials.

For the negative pressure or the micro-negative pressure operation, the machine is good for its tightness and high in theefficiency so as to eliminate the environmental pollution.

技術參數